• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2007년도 춘계 학술대회논문집
• /
• pp.83-86
• /
• 2007

Turbulent flow analysis is conducted around the multi-stage launch vehicle including base region and detachment motion of strap-on boosters due to resultant aerodynamic forces and gravity is simulated. Aerodynamic solution procedure is coupled with rigid body dynamics for the prediction of separation behavior. An overset mesh technique is adopted to achieve maximum efficiency in simulating relative motion of bodies and various turbulence models are implemented on the flow solver to predict the aerodynamic forces accurately. At first, some preliminary studies are conducted to show the importance of base flow for the exact prediction of detachment motion and to find the most suitable turbulence model for the simulation of launch vehicle configurations. And then, developed solver is applied to the simulation of KSR-III, a three-stage sounding rocket researched in Korea. From the analyses, after-body flow field strongly affects the separation motions of strap-on boosters. Negative pitching moment at initial stage is gradually recovered and a strap-on finally results in a safe separation, while fore-body analysis shows collision phenomena between core rocket and booster. And a slight variation of motion is observed from the comparison between inviscid and turbulent analyses. Change of separation trajectory based on viscous effects is just a few percent and therefore, inviscid analysis is sufficient for the simulation of separation motion if the study is focused only on the movement of strap-ons.

• 한국추진공학회지
• /
• 제20권2호
• /
• pp.67-74
• /
• 2016

폭발볼트는 고폭약를 사용하는 분리장치의 하나로서 폭발볼트의 내부에서 형성되는 폭압 및 충격파에 의해 분리된다. 이러한 메커니즘을 갖는 폭발볼트는 분리시 생성되는 충격파 및 파편형성 최소화되도록 설계되어야 할 것이다. 본 연구에서는 폭발볼트 및 볼트를 구속하는 구속물과의 거리(Air gap)을 변수로 두어 분리시험을 수행하였다. 이때 Air gap 따른 분리유무 및 분리 형상을 확인 하였고, 가속도 센서를 이용하여 구속물의 전달되는 Pyro-shock를 측정하였다. 또한 ANSYS Autodyn 프로그램을 이용하여 폭발볼트의 분리거동을 해석하였다. 실험 및 해석으로부터 폭발볼트와 구속물 사이의 Air gap 크기에 따른 폭발볼트의 분리거동에 미치는 영향을 확인하였고 특정 볼트에 한해서 최적의 폭발볼트의 구속환경을 설정하였다.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.7-15
• /
• 2002

A particle flow visualization, electrostatic charging measurement and separation of triboelectrically charged particles in the external electric field by a fluidized bed tribocharger are conducted for the removal of PVC particles from mixed waste plastics. The laboratory-scale triboelectrostatic separation system consists of the fluidized bed tribocharger, a separation chamber, a collection chamber and a controller. PVC and PET particles can be imparted negative and positive surface charges respectively due to the difference of triboelectric charging series between particles and particles in the fluidized bed tribocharger, and can be separated by passing them through an external electric field. To visualize these charged particles, He-Ne laser is used with cylindrical lenses to generate a sheet beam. In the charging measurement, the particle motion analysis system (PMAS), capable of determining particle velocity and diameter. is used to non-intrusively measure particle behavior in high strength electric field. The average charge-to-mass ratios of PVC and PET particles are $1.4\;and\;1.2{\mu}C/kg$, respectively. The highly concentrated PVC (91.9%) can be recovered with a yield of about 96.1% from the mixture of PVC and PET materials for a single-stage processing. The triboelectrostatic separation system using the fluidized tribocharger shows the potential to be an effective method for removing PVC from mixed plastics for waste plastic recycling.

• Korean Membrane Journal
• /
• 제6권1호
• /
• pp.61-69
• /
• 2004

Small angle light scattering (SALS) and field emission scanning electron microscope (FE-SEM) have been used to investigate the effects of alcohol on phase separation of chlorinated poly(vinyl chloride) (CPVC)/tetrahydrofuran (THF)/alcohol (9/61/30 wt%) solution during water vapor induced phase separation. A typical scattering pattern of nucleation & growth (NG) was observed for all casting solutions of CPVC/THF/alcohol. In the case of the phase separation of CPVC dope solution containing 30 wt% ethanol or n-propanol, the demixing with NG was observed to be heterogeneous. Meanwhile, the phase separation of CPVC dope solution with 30 wt% n-butanol was found to be predominantly homogeneous NG. Although the different phase separation behavior of NG was observed with types of alcohol additives, the resultant surface morphology had no remarkable differences. That is, even though the NG process by water vapor is either homogeneous or heterogeneous, this difference does not play a main role on the final surface morphology. However, it was estimated from the result of hydraulic flux that the phase separation by homogeneous NG provided the membrane geometry with lower resistance in comparison with that by heterogeneous one.

• 한국의류학회지
• /
• 제40권5호
• /
• pp.879-893
• /
• 2016

This study explores the determinants of clothing disposition and examines their effect on the dimensions of clothing disposition behavior. The data of 316 women were collected nationwide using an online self-administered questionnaire. This study initially identified five types of disposition behavior as revising, permanent separation, giving away, selling, and donating to charity. Exploratory and confirmative factor analysis identified the underlying determinants of clothing disposition as self-concept, reusability, economic factor, social environment, affective association, storage, fashionableness, and a sense of belongingness. Structural equation modeling was conducted to examine the relationships between variables. The results demonstrated that six out of eight determinants significantly affected clothing disposition behavior. The effects of social environment and a sense of belongingness were relatively strong determinants that influenced the four types of disposition behaviors. However, self-concept and affective association did not influence the disposition behaviors. A series of one-way MANOVA was conducted to determine the effect of the eight demographic variables on the four modes of clothing disposition. Giving away, permanent separation, and donating to charity differed significantly in the groups of three demographic variables such as age, monthly income, and marital status. This study empirically elucidates what criteria consumers use when confronted with unused clothing and how the determinants of clothing disposition influence the modes of clothing disposition behavior. This study provides a framework for clothing disposition behavior and its determinants as well as suggests a new approach to clothing disposition behavior and improvements in marketing decisions.

• 멤브레인
• /
• 제24권5호
• /
• pp.341-349
• /
• 2014

분자 동력학(Molecular dynamics; MD) 전산모사 기술은 대상이 되는 입자(일반적으로, 원자)의 위치와 속도를 계산하여, 원자 및 분자들의 다양한 구조 및 동적 특성을 분석하는 데에 있어서 매우 유용한 기술이다. 기체 분리막 연구에 있어서도 MD는 그동안 free volume 분석, conformation search 등과 같은 고분자 구조 분석 및 permeability, diffusivity와 같은 기체 투과 거동을 연구하는 데 널리 사용되어 왔다. 본 총설에서는 기체 분리막 분야에 MD를 적용하는 일반적인 방법론에 대하여 서술하고, 다양한 관련 연구들을 소개하고자 한다.

• 한국항공우주학회지
• /
• 제35권6호
• /
• pp.474-482
• /
• 2007

초음속 공중발사 로켓의 모선분리에 대한 유동해석을 수행하였다. 전기체 형상의 모선(F-4E Phantom)에서 분리되는 로켓주변 유동장의 정상/비정상 유동해석을 위해 압축성 Navier-Stokes 방정식이 사용되었으며, 해석결과는 모선과 로켓간의 충격파-팽창파 간섭효과를 잘 보여주고 있다. 무게중심의 변화에 따른 로켓의 거동을 예측하기 위하여 세 가지 경우에 대한 전산해석을 수행하였으며, 결과적으로 초음속 공중발사 로켓의 안전한 모선분리를 위한 설계 가이드라인을 제시하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.36-40
• /
• 2006

초음속 공중발사 로켓의 모선분리에 대한 유동해석을 수행하였다. 모선(F-4E Phantom)에서 분리되는 로켓주변 유동장의 정상/비정상 유동해석을 위해 압축성 Wavier-Stokes방정식이 사용되었으며, 해석결과는 모선과 로켓간의 충격파-팽창파 간섭효과를 잘 보여주고 있다. 무게중심의 변화에 따른 로켓의 거동을 예측하기 위하여 세 가지 경우에 대한 전산해석을 수행하였으며, 결과적으로 초음속 공중발사 로켓의 안전한 모선분리를 위한 설계 가이드라인을 제시 하였다.

• Advances in materials Research
• /
• 제2권1호
• /
• pp.15-36
• /
• 2013

Incorporation of polar functional moieties into polyethylene (PE) film has been achieved by graft copolymerization of polar monomers such as methacrylic acid (MAAc) and acrylamide (AAm) on to PE film, preirradiated with ${\gamma}$-rays from $^{60}Co$ source, using benzoyl peroxide (BPO) as initiator in aqueous medium. Percentage of grafting of MAAc and AAm was determined as a function of irradiation dose, monomer and initiator concentration, temperature, reaction time and amount of water. Maximum percentage of grafting of MAAc (1453%) and AAm (21.28%) was obtained at [MAAc] = $235.3{\times}10^{-2}$ mol/L, [AAm] = $23.4{\times}10^{-2}$ mol/L, [BPO] = $5.5{\times}10^{-2}$ mol/L and $16.5{\times}10^{-2}$ mol/L at $80^{\circ}C$, $90^{\circ}C$ in 180 min and 90 min respectively. The grafted PE films were characterized by FTIR, Thermogravimetric analysis (TGA) Scanning Electron Micrography (SEM) and X-ray diffraction methods. Some selective properties of grafted films such as swelling behavior, ion and metal uptake have been carried out. The biodegradation studies of the grafted PE films have also been investigated. The grafted films developed superior swelling behavior with maximum swelling (480%) in water as compared to pristine PE (13.55%), better thermal stability and ion and metal uptake studies showed promising results that can be effectively used for desalination of brackish water and separation of metals from the industrial effluents.

• 한국콘텐츠학회논문지
• /
• 제17권12호
• /
• pp.215-225
• /
• 2017

본 연구는 주사침 자상을 유발하는 위험행동을 측정하기 위한 도구를 개발하고 타당도와 신뢰도를 검정하는 방법론적 연구이다. Reason(1990)의 불안전한 행동 이론을 토대로 25개 문항의 주사침 자상 위험행동 도구(NIRB scale)을 개발하였다. 요인분석 결과 주사바늘 뚜껑을 다시 씌우는 위험행동, 채혈검체를 옮길 때 주사바늘을 사용하는 위험행동, 사용한 주사바늘을 분리하는 위험행동, 주사바늘을 사용하는 주사행위 중 위험행동, 주사행위 후 사용한 주사바늘 처리 시 위험행동, 주사행위 준비 시 위험행동의 6개 요인이 추출되었다. 본 연구를 통해 주사침 자상 위험행동 측정도구의 신뢰도, 구성 및 준거타당도를 입증하였다.