• 대한원격탐사학회지
• /
• 제18권6호
• /
• pp.369-376
• /
• 2002

본 연구에서는 공간 영상 자료의 감독 분류에 있어, 분석자에 의하여 선정된 분류 항목별 교사 자료를 분광 특징별로 다수의 군집으로 분리하고, 각각의 군집을 새로운 분류 항목의 교사 자료로서 설정함으로써 분류 성능을 향상시킬 수 있는 기법을 제안하고자 한다 특징 분리를 통하여 생성된 교사 자료는 비교적 작은 값의 밴드별 분산값을 가질 뿐 아니라 정규분포 형태의 자료 분포를 보이게 되어 통계적 감독 분류 기법의 적용에 적합한 교사 자료로서의 성격을 가지게 된다. 제안된 기법은 부산 지역에 대한 Landsat TM 영상 자료를 이용하여 그 적용성이 시험되었으며, 기존의 통계적 분류 기법들에 의한 결과와 그 성능이 정성적으로 비교되었다. 시험 적용 결과, 본 기법은 분석자가 선정한 교사 자료의 분광적인 분포 형태에 관계없이 우수한 분류 성능을 나타내는 것으로 판단되며, 따라서 분류 항목의 설정 및 항목별 교사 자료의 선정에 있어 교사 자료의 분광적 특징에 대한 동일성을 유지하기 위한 노력을 줄여줄 것으로 기대된다.

• 한국의류학회지
• /
• 제39권3호
• /
• pp.457-467
• /
• 2015

The demand for coverall-type protective clothing are increasing in many industrial fields; however, it is impossible to evaluate the wearers' apparel fit because there is no commercialized pattern in the market. This study produces a manual for the process of acquiring patterns by separating PPE products into pieces to provide information on acquiring patterns. The analysis was on coverall-type non woven protective clothing in the domestic market, and 4 panels examined the validity, reliability, and efficiency of various possible methods on each step of process. Five steps were conducted to acquire patterns removing wrinkles, marking seams lines, separating seams, and pattern completing. The process of converting these into pattern files was designed through three procedures of digitizing, editing, and exporting and detailed stages. Fitting tests were undertaken, real patterns by actual modeling and pattern files by virtual modeling; all showed similar forms with outfits wearing ready-made protective coveralls. This study sought the most efficient and objective method of virtual modeling and proposed it as a manual. It is expected for the pattern reverse-designing manual through products analysis presented in this study that would be a helpful addition of information to the pattern tracing of pattern-less clothing products.

• 한국육종학회지
• /
• 제40권1호
• /
• pp.26-30
• /
• 2008

전기영동법과 발색반응법 등의 장 단점 분석을 통해 가장 저렴한 비용으로 신속, 정확하게 lipoxygenase isozymes를 검정하는 분석체계를 확립하여 무비린내 나물콩 품종육성에 활용 가능할 것으로 보인다. 1. SDS-PAGE 전기영동법은 Lx-0, L-1, L-2, 및 L-123의 검정에는 효과적이었으나, L-3, L-13, 및 L-23의 검정에서는 분리능에 있어서 정확도가 떨어져 검정효율은 92.2%를 나타내었다. 2. 발색반응법을 이용한 lipoxygenase isozymes의 검정방법은 간편하고 신속하였으며 검정효율은 95.7%였다. 3. L-1과L-2가 존재하는 종실의 기질용액에서는 1분 이내에 methylene blue의 청색 반응용액을 탈색시켰으며 그 결과가 오랫동안 지속되었다. 4. L-3가 존재하는 종실의 용액에서는 20초 이내에 ${\beta}$-carotene의 황색 반응용액을 탈색시켰으나 그 결과가 오래 지속되지 않아 신속한 결과분석이 요구되었다. 5. L-1, L-2 및 L-3을 동시에 검정하기 위한 전체 시료량은 콩 종자 1알의 약 10 mg 정도이면 충분하였으며, 검정하지 않은 나머지 부분은 파종에 이용될 수 있으므로 F2 종자에서 lipoxygenase isozymes 결핍계통을 조기에 선발 가능하였다. 6. 발색반응법과 SDS-PAGE 전기영동법을 적절히 겸용하여 수행하게 되면 시료 분석에 소요되는 시간은 1인 100점에 6.5시간 재료비는 약 54,000원이 소요되어 이 시스템이 가장 효율적인 lipoxygenase 검정방법으로 판명되었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.699-704
• /
• 2002

A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(Multiple Signal Classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique is also used to reduce the coherence between the incident and reflected waves. The test materials were modeled as a locally reacting surface. Numerical and experiment results are performed to verify the acuracy of proposed method.

• 한국소음진동공학회논문집
• /
• 제23권8호
• /
• pp.734-741
• /
• 2013

In contrast of external excitations, parametric excitations can produce a large response when the excitation frequency is away from the linear natural frequencies. The Mathieu equation is the simplest differential equation with periodic coefficients, which lead to the parametric excitation. The Mathieu equation may have the unbounded solutions. This work conducted the stability analysis for the Mathieu equation, using Floquet theory and numerical method. Using Lindstedt's perturbation method, harmonic solutions of the Mathieu equation and transition curves separating stable from unstable motions were obtained. Using Floquet theory with numerical method, stable and unstable regions were calculated. The numerical method had the same transition curves as the perturbation method. Increased stable regions due to the inclusion of damping were calculated.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.438-444
• /
• 2003

A method using beamforming algorithm has been developed to measure oblique incidence reflection coefficients of sound absorption materials. MUSIC(multiple signal classification) method detects the angles of incidence and reflection. By separating the incident and reflected waves using beamforming method, the reflection coefficient is calculated. Spatial smoothing technique Is also used to reduce the coherence between the incident and reflected waves. Numerical and experiment results are performed to verify the accuracy of proposed method.

• 반도체디스플레이기술학회지
• /
• 제9권2호
• /
• pp.41-47
• /
• 2010

In this paper we suggest an improvement upon the previous method of estimating a body's attitude. This paper presents a method that overcomes the shortcomings of previous studies. Applying the method of separating the acceleration of gravity component from the accelerometer's output improves the performance of the attitude estimation and extends the scope. In order to apply the method of the attitude estimation in an actively moving body, a new acceleration value containing the acceleration of gravity is calculated. This paper also proposes the method which minimizes the estimation error in estimating the moving body's attitude which is changing rapidly. Finally, this paper suggests a method that detects the gyroscope's drift and compensates for this drift using accelerometer. Applying the method improves the performance of the attitude estimation.

• 대한기계학회논문집
• /
• 제17권5호
• /
• pp.1095-1105
• /
• 1993

본 연구에서는 앞서 개발된 3차원 강소성 유한요소법을 이용하여 H-형강 압연 공정을 해석하여 그 타당성을 검토하고 이를 실제의 공정 설계에 이용할 수 있도록 하였다.

• 디지털산업정보학회논문지
• /
• 제10권3호
• /
• pp.143-149
• /
• 2014

This paper is on the blind signal separation(BSS) method by the geometric method. To separate the signal sources, we use Hough transform and BSS. Hough transform is a geometric method which let us know the local informations of the signal. We find the orientations of signals by Hough transform and know the number of signal sources. When the number of sensors is more than the number of sources. the BSS algorithm can separate the mixtures well in the time domain. This algorithm has a good performance in converging fast. We had checked up the quality of the algorithm after separating the mixed signals. The results of simulations show that this BSS method has the abnormal waveforms due to unconverging coefficients in the beginning, and stably has the separated waveforms which almost equal to the sources in the most period.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(4)
• /
• pp.187-190
• /
• 2000

In this paper, implementation of speech Recognizer system, Separated from Personal computer. By using DSP, this intends to extend the voice recognizing, limited into PC because of amount of data and calculations. For this performance The thesis uses the real time End point detector and organizes no additional device between human and the system, characteristic vector are that detects End point and voice from absolute energy and ZCR, that uses 12 difference Cepstrum from LPC, that uses the method to compensate the process of pattern separating and pre-calculated standard pattern limitation.