• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.848-851
• /
• 2003

In this paper, a separating system for used CRT recycling is presented. Depend on manufacturer CRTs has small differences in dimension for the same model, but the dimensions of the panel are nearly same. To simplifying configuration of the system, we developed CRT fixing pallets for every model of CRT. The height of cutting position for every model of CRT will be same. The cutting machine has two rotating arm and use metal-bond type diamond cutting wheel. Instead of water, two vortex tube type air-coolers are used for the cooling of cutter. Workers in recycling factory are generally old people. Therefore, control program should be easy to use and operate. Thus we developed GUI with very simple interface.

• 대한기계학회논문집B
• /
• 제32권11호
• /
• pp.856-862
• /
• 2008

This paper presents the characterization of a continuous magnetophoretic microseparator for separating white and red blood cells from peripheral whole blood cells based on their native magnetic properties. The magnetophoretic microseparator separated the blood cells using a high gradient magnetic separation (HGMS) method without the use of additives such as magnetic beads or probing materials. Experimental results show that the paramagnetic capture mode microseparator can continuously separate out 93.5% of red blood cells and 97.4% of white blood cells from diluted whole blood, and the diamagnetic capture mode microseparator can continuously separate out 89.7% of red blood cells and 72.7 % of white blood cells by using applying an external magnetic flux of 0.2 T using a permanent magnet.

• 대한화학회지
• /
• 제24권3호
• /
• pp.239-244
• /
• 1980

모나자이트 중의 Y, La, Ce, Pr 및 Nd 들을 pH 8.4에서 EDTA와 착염을 만들어 미리 음이온 교환수지에 EDTA를 흡착시킨 수지관에 용리시켜 희토류 원소들의 분리를 시도하였다. 용리액은 pH 8.4의 EDTA를 사용하였으며, 용리액의 분율에 따라 측정한 각이온의 분리도는 55∼98%이었다.

• Journal of Biosystems Engineering
• /
• 제6권2호
• /
• pp.33-47
• /
• 1982

To modernize the conventional rice post production technology and reduce grain losses, a transition toward the wet-paddy threshing system has been strongly demanded. The head-feeding type thresher with pneumatic separation has been used dominantly for threshing dried-paddy, but some adverse effects in separation performance for threshing wet-paddy is encounterred. In order to solve the problems, the development of thresher with an additional oscillating sieve to the conventional pneumatic separation has been recommanded. This study was intended to evaluate the separating performance of thresher with oscillating sieve which was attached additionally to the conventional auto-thresher equipped with separation system of blower and suction fan. For different feed rates and rice varieties, wet-and dry-material were tested with threshers attached with and without oscillating sieve. Results of the study are summarized as follows: 1. When the feed rates were 480 and 640 kg/hr, there was no statistically significant difference in power reqirements between the threshers with and without an additional sieve device for both dry-and wet-threshing. However, when the feed rate was 960 kg/hr, power requirements of thresher without sieve were greater for wet-paddy threshing than the thresher with the additional sieve separator by about 20% points. 2. With additional oscillating sieve device, the ratios of total weights of whole grains including grains with branch let and damaged grains to the total output did not show statistical difference among the feed rates. However, with pneumatic separation the ratio was decreased as the level of feed rate increased. 3. The total amount of grains with branchlet (including broken panicle) increased with the moisture content. For both the wet-and dry-material threshing with the additional oscillating sieve, the percent of grains with branchlet to the total output decreased greatly as the feed rate increased. 4. The output of the damaged grains increased as moisture content decreased. Especially, for the dry-paddy threshing, the additional sieve separating device produced more damaged grains than the pneumatic separation at all feed rates. 5. Generally, for dry paddy threshing, the separating performance of the thresher with the additional sieve device was better at all feed rates, showing greater difference with increasing feed rates. 6. Separating losses were greater with the pneumatic than sieve separation for both the wet-and dry-threshing. 7. The overall comparison of separating performance of threshers tested with and without an additional sieve device showed that the former was more effective than the latter for the dry-material threshing. However, for the wet-paddy threshing, the separation performance with a sieve device was better than the pneumatic only when the feed rate was high.

• 응용통계연구
• /
• 제22권4호
• /
• pp.759-770
• /
• 2009

본 논문은 신호와 잡음이 혼합된 관측치로부터 신호 관측치를 분류하는 문제를 다룬다. 잡음은 가우시안 분포를 따르고 신호는 감마 분포를 따른다고 가정할 때 관측치의 분포는 가우시안과 감마의 혼합 분포를 따르게 된다. EM 알고리즘을 통해 혼합 모델의 모수를 추정하고 신호 및 잡음을 분류하는 것을 다중 가설 검정으로 간주하여 베이즈 오류를 바탕으로 분류를 위한 경계치를 설정한다. 제안하는 방법을 분광 데이터에 근거하여 철강 제품에서 개재물 유무를 검출하는 문제에 적용하였고 별도의 시뮬레이션 데이터를 통해 성능의 우수성을 보였다.

• 한국해양공학회지
• /
• 제17권4호
• /
• pp.37-42
• /
• 2003

The mechanical components with high-pressure hoses are generally produced by the swaging process. The hoses are composed of the rubber materials and the reinforced braids to support tensile forces. In case they are subjected to high mechanical and thermal loads under severe operating conditions, the oil in hoses can leak at the parts of small clamping forces. In this paper, the deformation characteristics of a fiber-reinforced hose are analyzed with respect to the jaw strokes using the finite element method. The manufacturing process is modeled with a contact problem in consideration of a real situation, and the material properties based on the experimental results are used in the analysis. Examinations of the relationship between the swaging strokes and the deformation behaviors of the hose were made on the basis of the stress and strain values of the hose components. The relations between clamping forces and separating forces are also proposed, in order to estimate clamping forces corresponding to separating forces for the given model.

• 동력기계공학회지
• /
• 제5권1호
• /
• pp.64-72
• /
• 2001

According to the regulation of IMO, oil discharge from ships is allowed under 15ppm only and an oil filtering equipment is essential. However, for large ships using heavy fuel oil of over S.G 0.98 and viscosity 380cSt and system oil, it has been in difficulty to process with existing filtering type of oily water separator. A parallel plate type oily water separator which is one of gravity type separators can be used as an assistant equipment for the oil filtering system to meet the present IMO standard of 15 ppm, because it is an efficient method in dealing with a large amount of rich oil with high specific gravity. This work is focused on the fundamental investigation of the performance of the plate type oily water separator by visualization method and PIV(Particle Image Velocimetry) measurement to acquire multi-point velocity data simultaneously. The experimental results showed that the space of the plates acts a significant role in separating process and it was found that an important point to minimize a vortex flow is to flow a large amount of fluid in space of the plates in order to promote the efficiency of separation.

• 한국농림기상학회지
• /
• 제7권1호
• /
• pp.28-34
• /
• 2005

탄소 순환에 중요한 부분을 차지하는 토양 호흡을 뿌리와 토양 미생물에 의한 호흡으로 분리하는 세가지 연구 방법, 즉 (1) 구성 요소 직접 측정 방법, (2) 뿌리 제거 방법, (3) 동위원소 이용 방법을 검토하였다. 이 중에서,구성 요소 직접 측정 방법과 뿌리 제거 방법이 가장 널리 사용되고 있는데, 전체 토양 호흡에서 뿌리 호흡이 차지하는 부분은 뿌리 제거 방법이 다른 두 방법과 비교하여 더 높게 나타난다. 뿌리 제거 방법 중 단근처리 방법은 뿌리를 굴취하여 제거하거나 지상부 식생을 제거하는 방법과 비교해 볼 때 토양이나 관측 지면에 거의 교란을 일으키지 않는 다 동위원소 이용 방법은 다른 방법과 비교해서 토양이나 뿌리에 미치는 영향이 가장 적으나 비용이 많이 들고 복잡한 분석 기술을 필요로 한다. 관측지의 교란을 최소화하면서 발생원별 토양 호흡에 기여하는 부분을 계산하는 방법으로 단근처리 방법이 적절한 것으로 사료된다. 그러나 이 방법이 뿌리의 분해로 인해 미생물의 호흡을 과대평가함을 고려해서 뿌리의 분해를 동시에 관측하거나 큰 뿌리들을 피해서 단근처리 대상지역을 선택함으로써 현실적인 결과를 얻을 수 있을 것이다.

• 한국컴퓨터그래픽스학회논문지
• /
• 제15권4호
• /
• pp.1-11
• /
• 2009

본 연구에서는 다각형 메쉬 모델들에 대한 시뮬레이션 수행시 주요 병목현상으로 제기되는 충돌감지의 효율성을 높이기 위하여, 연속 시간사이에서 이산시간 스위프트로 형성된 프리즘을 단위로 하는 효율적 메쉬 컬링 기법을 제안한다. 제안 기법에서는 우선, 연속 시간사이에서 대응되는 두 삼각형을 이용하여 프리즘을 정의하고, 프리즘 단위의 폐쇄검사(Occlusion Query) 기반 가시성 테스트(Visibility Test)를 실시하여, 교차 가능성이 없는 프리즘을 세부 충돌테스트의 대상에서 제외시킨다. 또한, 가시성 테스트 결과로 추출된 프리즘의 충돌가능 집합(PCS: Potential Colliding Set)에서 충돌 가능성이 없는 프리즘의 쌍들을 분리축 테스트(SAT: Separating Axis Test)을 기반으로 분류하는 협대역 컬링(Narrow Band Culling)을 수행한다. 분리축 테스트 시, 두 프리즘의 영역을 각각의 반공간(Half Space)에 포함시키는 평면을 정의하고 이에 수직인 주축을 정의하여, 단일 주축에 대한 분리 검사를 수행함으로써 수행 효율성을 높인다. 제안기법의 성능을 평가하기 위하여 서로 다른 크기의 벤치마크 모델을 선정하고, 제안 기법 적용 전후의 세부 층돌검사 대상 프리즘 쌍의 수를 비교하였다. 또한, 단일 주축에 대한 분리축 테스트 기반 컬링의 효율성을 입증하기 위하여, 프리즘 쌍에 대한 가시성테스트 실험 결과와 비교하였다. 2916개와 2731개의 삼각형으로 구성된 두 메쉬모델에 대한 컬링 실험에서, 제안 컬링기법 적용시 99%의 효과적인 컬링결과를 얻었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.69-70
• /
• 2006

Waste vinyl tretreatment system has been developed by the joint project between KIMM and Woosung Co. General process for removal of impurities from waste vinyl is consisted of feeding, separating, cutting, washing, drying and recovering impurities. However, there are problems such as wastewater when washing of waste vinyl. In order to solve these problems we have developed new dry type cleaning system.