• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.768-774
• /
• 2014

SI process is a thermochemical process producing hydrogen by decomposing water while recycling sulfur and iodine. Various technologies have been developed to improve the efficiency on Section III of SI process, where iodine is separated and recycled. EED(electro-electrodialysis) could increase the efficiency of Section III without additional chemical compounds but a substantial amount of $I_2$ from a process stream is loaded on EED. In order to reduce the load, a crystallization technology prior to EED is considered as an $I_2$ removal process. In this work, $I_2$ particle sinking behavior was modeled to secure basic data for designing an $I_2$ crystallizer applied to $I_2$-saturated $HI_x$ solutions. The composition of $HI_x$ solution was determined by thermodynamic UVa model and correlation equations and pure properties were used to evaluate the solution properties. A multiphysics computational tool was utilized to calculate particle sinking velocity changes with respect to $I_2$ particle radius and temperature. The terminal velocity of an $I_2$ particle was estimated around 0.5 m/s under considered radius (1.0 to 2.5 mm) and temperature (10 to $50^{\circ}C$) ranges and it was analyzed that the velocity is more dependent on the solution density than the solution viscosity.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.2
• /
• pp.365-372
• /
• 2004

The purpose of this study was to implement HACCP system to foodservice of W and D elementary schools with joint-lunch management system in Kyungsan area. Steamed rice with squid was selected and Control Action, Monitoring Procedure and Control measure were identified based on HACCP flowchart to produce safe and healthy food. It was suggested that frozen squid must be thawed under the cold running city water and kept temperature below 1$0^{\circ}C$ and receiving/thawing procedure has to be done within 30 min. Raw vegetables must be washed under three-tube wash stand and whole prepreparation procedures should be done in 20 minutes. Clean and sanitize all the equipment and utensils before and after handling squid. Knives and cutting boards for vegetable and squid should be classified. Sauce for steamed rice with squid should be heated about 21 minutes to reach the temperature of 94$^{\circ}C$ before serving and internal temperature of food must be kept above 84.4$^{\circ}C$ during serving. The ideal temperature of kitchen should be remained 15∼18$^{\circ}C$. The underground water has to be excluded to minimize the risk of contamination in the foodservice facility and the prepreparation place must be separated with cooking place. Also, Personal hygiene Practice should be check in each stage. Further, additional research needs to be conducted to determine models for HACCP implementation for different menu.

• The Journal of Korean Academy of Prosthodontics
• /
• v.43 no.6
• /
• pp.707-716
• /
• 2005

Statement of problem. Collarless metal ceramic fixed partial dentures(FPDs) had an esthetic problem such as opaque reflection in cervical region. To overcome this, modified coping which removed its facial cervical metal could be used. The marginal quality could be worsen according to the amount of its facial metal reduction. Purpose. The purpose of this study was to evaluate marginal fits of collarless metal ceramic FPDs with retainers of modified copings. Material and method. Dentoform maxillary left central incisor and right lateral incisor were prepared for 3-unit collarless metal ceramic FPD and fixed in yellow stone. This model was duplicated to PBT resin dies via CAD/CAM and injection molding. Four different facial margin design groups were investigated. Group A was a coping with a thin facial metal collar, group B was a collarless coping with its facial metal to the shoulder, group C was a collarless coping with its facial metal 1 mm short of the shoulder, and group D was a collarless coping with its facial metal 2 mm short of the shoulder. Seven collarless metal ceramic FPDs per group were fabricated. They were cemented to PBT resin dies with resin cement. After removal of pontics, each retainers were separated and observed under Accura 2000 optical microscope. Then, retainers were embeded in orthodontic resin and cross sectioned faciopalatally. Internal marginal fits of midfacial porcelain margins were observed under FE-SEM. Result and conclusion. Within the limitations of this in vitro study. The following conclusions were drawn. 1. Mean marginal gaps of collarless FPDs were in the $50-60{\mu}m$ range. 2. In midfacial margin, marginal discrepancies were greater in group A than in the experimental groups(p<0.05). 3. In midpalatal margin, marginal gaps were greater in group C and D than in group A and B(p<0.05). 4. Marginal fits of porcelain margins were better than those of metal margins in collarless metal ceramic FPDs. 5. In both teeth, internal marginal gaps of group C and D were greater than those of group A and B(p<0.05).

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2292-2314
• /
• 2006

Efficient numerical method is developed for the prediction of aerodynamic noise generation and propagation in low Mach number flows such as aeolian tone noise. The proposed numerical method is based on acoustic/viscous splitting techniques of which acoustic solvers use simplified linearised Euler equations, full linearised Euler equations and nonlinear perturbation equations as acoustic governing equations. All of acoustic equations are forced with immersed surface dipole model which is developed for the efficient computation of aerodynamic noise generation and propagation in low Mach number flows in which dipole source, originating from unsteady pressure fluctuation on a solid surface, is known to be more efficient than quadrupole sources. Multi-scale overset grid technique is also utilized to resolve the complex geometries. Initially, aeolian tone from single cylinder is considered to examine the effects that the immersed surface dipole models combined with the different acoustic governing equations have on the overall accuracy of the method. Then, the current numerical method is applied to the simulation of the aeolian tones from twin cylinders aligned perpendicularly to the mean flow and separated 3 diameters between their centers. In this configuration, symmetric vortices are shed from twin cylinders, which leads to the anti-phase of the lift dipoles and the in-phase of the drag dipoles. Due to these phase differences, the directivity of the fluctuating pressure from the lift dipoles shows the comparable magnitude with that from the drag dipoles at 10 diameters apart from the origin. However, the directivity at 100 diameters shows that the lift-dipole originated noise has larger magnitude than, but still comparable to, that of the drag-dipole one. Comparison of the numerical results with and without mean flow effects on the acoustic wave emphasizes the effects of the sheared background flows around the cylinders on the propagating acoustic waves, which is not generally considered by the classic acoustic analogy methods. Through the comparison of the results using the immersed surface dipole models with those using point sources, it is demonstrated that the current methods can allow for the complex interactions between the acoustic wave and the solid wall and the effects of the mean flow on the acoustic waves.

• Korean Journal of Ecology and Environment
• /
• v.40 no.2
• /
• pp.223-233
• /
• 2007

For this study, we analyzed spatial and temporal patterns of trophic state and water quality over the period of $2002{\sim}2005$, using the water chemistry dataset obtained from the Korea Rural community & Agriculture corporation. Most reservoirs, based on TN, showed eutrophic (about 88% of the total). About 20% of agricultural reservoirs, based on TP, showed eutrophic after the criteria of OECD (1982), while 71% and 3% were Hesotrophic and oligotrophic, respectively. Seasonal variations were evident due to the intense monsoon rain during July${\sim}$August; conductivity, COD, SS, nutrients, and chlorophyll-${\alpha}$ (CBL) increased in the postmonsoon compared to the premonsoon. TP values had positive functional relations with conductivity, COD, and CHL values. COD and SS peaked during the intense monsoon. Mean values of TP and CHL values were two times greater in the intense monsoon than the weak monsoon. The increased TP was probably due to inorganic suspended solids from point and non-point sources during the monsoon. Ratios of TN : TP had strong in- verse relations ($R^2$=0.843, p<0.001, n=34) with TP, but not with TN (p>0.05, n=34). Log10-transformed CHL increased with TP in most P-limited reservoirs $(Log_{10}TP=0.5{\times}Log_{10}CHL+0.086)$. Similarity analysis, based TN, TP, and CHL showed that three groups were separated at 90% similarity level; One group was reservoirs with high salinity nearby the seawater, and the other two groups were reservoirs with a low salinity of the inland, and intermediate salinity, respectively.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.4
• /
• pp.333-340
• /
• 1990

The authors carried out a visiualizational model test by the hydrogen bubble method to examine the pattern of the fluid flow besides the simple camber type and plane type otter board in circulation water channel. The experimental conditions are velocity of flow 0.05 and 0.1m/sec, angle of attack 0$^{\circ}$~45$^{\circ}$(5$^{\circ}$step). The results obtained are as follows: 1. In the case of the simple camber type otter board located angle of attack 25$^{\circ}$, vortex at the leading edge was geneated at 1/2 of chord length. 2. Size of the vortex generated in the trailing edge was about 2~3 times larger then that of the leading edge. 3. In the case of the simple camber type otter board located angle of attack 30$^{\circ}$, separation of stream-line at leading edge was generated at 1/3 of chord length. 4. Nearest stream-line in the back side of the simple camber type otter board was bent in the direction of otter board when the angle of attack was 25$^{\circ}$ and 30$^{\circ}$, and in the case of plane type otter board was expanded outside of the flow direction. 6. Area separated of the simple camber type otter board at the angle of attack 30$^{\circ}$ was smaller then that of plane type otter board. 7. Flow speed in the back side of the simple camber type otter board was about 1.4 times faster then that in the front side, and in the case of the plane otter board about 1.2 times faster.

• Korean Journal of Microbiology
• /
• v.32 no.3
• /
• pp.177-181
• /
• 1994

The sequences of the cytoplasmic 5S rRNAs(EMBL accession number X73589 and X73890) from two polupores, Ganoderma applanatum and Schizopora paradoxa, were determined by the direct chemical method for sequencing RNA and compared to the sequences of 9 reported mushrooms. 5S rRNAs of Ganoderma applanatum and Schizopora paradoxa consisted of 118 bases and fit the secondary structure model of the 5S rRNAs of basidiomycetes proposed by Huysmans et al. Based on Kimura’s K_nuc values, the closest fungus to Ganoderma applanatum was Ceratobasidium cornigerum and the one to Schizopora paradoxa was Bjerkandera adusta. When the secondary structures of 5S rRNAs of 11 mushrooms were compared the base substitution occurred at helix regions more than at loop regions. When a phylogenetic tree was constructed using the Neighbor program of the PHYLIP package, it partially discriminated and separated the mushrooms of the Hymenomycetes by the order.

• Korean Journal of Food Science and Technology
• /
• v.30 no.2
• /
• pp.439-445
• /
• 1998

The antimutagenic activity of the water extract of Rehmannia glutinosa Liboschitz (RG) on the mutagenicity induced by 4-nitroquinoline 1-oxide (4-NQO), N-methyl-N'-nitro-N-nitrosoguanidine (MNNG), mitomycin C (MMC), $aflatoxin\;B_1\;(AFB_1)$ and benzo(a)pyrene [B(a)P] were studied using the SOS Chromotest with Escherichia coli PQ37. The water extract of RG was separated into methanol soluble and methanol insoluble parts. The methanol soluble part exhibited higher inhibition effects than the methanol insoluble part against the mutagenic activities of five mutagens. Step-wise fractionation of methanol soluble part was done using methanol, ethyl acetate and water. Among these fractions, water fraction had the strongest inhibitory effects against the mutagenenicity of five model mutagens, showing $4.5{\sim}29.5%$ inhibition, but the $AFB_1$ mutagenic potency was increased slightly by ethyl acetate fraction. The water fraction was further partitioned by sephadex LH-20 column chromtography, and 9 subfractions were obtained. The fraction III showed the strongest inhibitory effects with dose response against the mutagenic activities induced by all the tested chemical mutagens. The inhibition rates of fraction III at concentration of $400\;{\mu}g/assay$ were 29%, 35%, 38%, 25% and 24% against 4-NQO, MNNG, MMC, AFBl and B(a)P, respectively. The fraction III also exhibited a strong bio-an-timutagenicity against 4-NQO and $AFB_1$ by showing more than 40% inhibition.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.14 no.6
• /
• pp.1249-1256
• /
• 2019

In this paper, we propose a new algorithm to remove acoustic feedback and noise in hearing aids. Instead of using the conventional FIR structure, this algorithm is a deep learning algorithm using neural network adaptive prediction filter to improve the feedback and noise reduction performance. The feedback canceller first removes the feedback signal from the microphone signal and then removes the noise using the Wiener filter technique. Noise elimination is to estimate the speech from the speech signal containing noise using the linear prediction model according to the periodicity of the speech signal. In order to ensure stable convergence of two adaptive systems in a loop, coefficient updates of the feedback canceller and noise canceller are separated and converged using the residual error signal generated after the cancellation. In order to verify the performance of the feedback and noise canceller proposed in this study, a simulation program was written and simulated. Experimental results show that the proposed deep learning algorithm improves the signal to feedback ratio(: SFR) of about 10 dB in the feedback canceller and the signal to noise ratio enhancement(: SNRE) of about 3 dB in the noise canceller than the conventional FIR structure.

• Toxicological Research
• /
• v.22 no.3
• /
• pp.221-228
• /
• 2006

Bonogen shampoo is composed of several plant extracts which are known to be used in oriental medicine. This study was carried out to investigate the effects of Bonogen shampoo on hair growth in an alopecia model of C57BL/6 mice. There were eight male and female experimental groups including distilled water(DW: negative control), a commercial shampoo[M], 3% minoxidil (MXD) and Bonogen shampoo(BNG). Dorsal skin hair of six-week-old mice was trimmed with an electric clipper carefully not to damage the skin. The next day, mice without skin scratch were selected, randomized and separated in 10 mice per group. The test compounds were topically treated with 0.15 ml per mouse or dorsal skin for 21 days daily and then washed thoroughly with DW. The hair regrowth was determined photographically at 0, 4, 7, 10, 15, 18, and 21 days and histologically at day 21. No clinical signs were observed in all mice. Although body weight was slightly increased in 3% MXD group than other groups, it was not significant. Hair regrowth began to be promoted after 14 days and appeared a distinct regrowth pattern in all animals by topical treatment of test compounds at 18 days. In particular, the topical treatment of bonogen shampoo or 3% MXD for 21 days to dorsal skin accelerated hair regrowth faster than DW or M shampoo. At 21 days, the hair regrowth promotion speed was in order of 3% MXD>BNG>M>DW. The bonogen shampoo or 3% MXD also promoted hair follicle elongation compared to the negative control. These results suggest that bonogen shampoo has hair growth promoting activities and may be useful for treatment of bald or alopecia.