• 대한기계학회논문집A
• /
• 제24권5호
• /
• pp.1193-1202
• /
• 2000

The paper describes the use of genetic algorithms (GA's) to the minimum weight design of stiffened composite panels for buckling constraints. The proposed design problem is characterized by mixture of continuous and discrete design variables corresponding to panel elements and stacking sequence of laminates, respectively. Design space is multimodal and non-convex, thereby introducing the need for global search strategies. Advanced strategies in GA's such as directed crossover, multistage search and separated crossover are adopted to improve search ability and to save computational resource requirements. The paper explores the effectiveness of genetic algorithms and their advanced strategies in designing stiffened composite panels under various uniaxial compressive load conditions and the linrlit on stacking sequence of laminates.

• Macromolecular Research
• /
• 제13권6호
• /
• pp.514-520
• /
• 2005

Composite membranes of Nafion and sulfonated poly(arylene ether sulfone) were prepared. Sulfonated poly(arylene ether sulfone)s with different degrees of sulfonation were blended with Nafion to reduce the methanol crossover. The morphology, proton conductivity and methanol permeability of the resulting composite membranes were investigated by SEM, EDAX, AC impedance spectroscopy and permeability measuring instrument. The cross­sections of the composite membranes showed a phase separated morphology. The morphology and phase separation mechanism could be controlled by varying the blend ratio and the degree of sulfonation of poly(arylene ether sulfone). These complex morphologies can be applied for reducing methanol crossover. The methanol permeability and proton conductivity of the composite membranes were lower than those of Nafion 117 membrane since the development of an ionic pathway in the blend membrane was more difficult than that in Nafion itself.

• Macromolecular Research
• /
• 제16권5호
• /
• pp.457-466
• /
• 2008

The relation between the phase separated morphologies and their transport properties in the polymer blend membrane for direct methanol fuel cell application was studied. In order to enhance the proton conductivity and reduce the methanol crossover, sulfonated poly(arylene ether sulfone) copolymer, with a sulfonation of 60 mol% (sPAES-60), was blended with nonsulfonated poly(ether sulfone) copolymer (RH-2000, Solvay). Various morphologies were obtained by varying the drying condition and the concentration of the casting solution (10, 15, 20 wt%). The transport properties of proton and methanol molecule through the polymer blend membranes were studied according to the absorbed water. AC impedance spectroscopy was used to measure the proton conductivity and a liquid permeability measuring instrument was designed to measure the methanol permeability. The state of water in the blend membranes was confirmed by differential scanning calorimetry and was used to correlate the morphology of the membrane with the membrane transport properties.

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.425-429
• /
• 2014

최근까지 대부분의 PEMFC MEA(Membrnae and Electrode Assembly) 열화 연구는 전극과 전해질 막 각각 분리되어 연구되었다. 그런데 실제 PEMFC 운전조건에서는 전극과 전해질 막은 동시에 열화된다. 동시열화과정에서 전극열화와 전해질 막 열화는 상호 작용한다. 전해질 막의 열화정도를 측정하는데 수소투과도가 많이 사용되고 있다. 그런데 동시 열화가 발생했을 때 선형 쓸음 전기량 측정법(Linear Sweep Voltammetry, LSV)에 의해 수소투과도를 측정하면 전극열화가 수소투과전류를 감소시키는데, LSV 방법이 전극 촉매의 활성 면적에 의존하기 때문이다. 본 연구에서는 전극과 막 동시 열화과정에서 기체 크로마토그래프에 의한 PEMFC 전해질막의 수소투과도를 측정하였다. 기체 크로마토그래프 측정 방법은 전극 상태와 무관하기 때문에 전극과 막 동시 열화 과정에서 수소투과도가 전극 열화 영향을 받지 않음을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제50권5호
• /
• pp.778-782
• /
• 2012

최근까지 대부분의 PEMFC MEA (Membrane and Electrode Assembly) 열화 연구는 전극과 전해질막 각각 분리되어 연구되었다. 그런데 실재 PEMFC 운전조건에서는 전극과 막은 동시에 열화된다. 그래서 본 연구에서는 전극과 막열화가 동시에 일어나는 조건에서 열화 가속시험을 하였다. 실험결과 전극과 막 열화가 서로 상호작용함을 보였다. 막열화는 촉매의 활성면적 감소폭을 줄였고, 전극열화는 막의 수소투과 전류와 불소유출속도(FER) 증가폭을 감소시켰다.

• 한국연소학회지
• /
• 제13권1호
• /
• pp.31-43
• /
• 2008

Oxy-fuel flame has a significantly different structure from that of air-fuel flame because of its high temperature. This study is aimed to find out the difference of the oxy-fuel flame structure in order to understand reaction mechanism closely, which is crucial to design real-scale oxy-fuel combustion system. By examining pictures of counterflow flame and LIF images, we found that oxy-fuel flame had two-zone structure: fuel decomposition region and distributed CO oxidation region. In the oxy-fuel flame, OH radical was distributed intensely through the whole flame due to its higher flame temperature than crossover temperature. For showing those features of the oxy-fuel flame, 1 MW scale IFRF oxy-natural gas burner was simulated by conditional moment closure(CMC) model. Calculation results were compared with experimental data, and showed agreements in trend. In the simulated distributions of fuel decomposition/CO oxidation rates, CO oxidation region was also separated from fuel decomposition zone considerably, which showed the two-zone structure in the oxy-fuel flame.

• 한국정보전자통신기술학회논문지
• /
• 제11권3호
• /
• pp.277-282
• /
• 2018

인터넷 상에서 비밀 메시지의 통신 목표는 비인지성과 기밀성을 유지하는 것이다. 디지털 스테가노그래피는 메시지 존재 자체를 제3자가 감지하지 못하게 커버 매체에 비밀 메시지를 삽입하여 목적지에 전송하는 기법이다. 스테가노그래피는 암호화 기법과 혼합되어 기밀성과 무결성을 함께 보장하기 위한 효율적인 방법이다. 비밀(한글) 메시지를 삽입하기 위해 비밀 문자를 분리하고 암호표를 참고로 하여 이진화 코드로 변환하며, 커버 이미지를 두 영역으로 분할하며, 비밀 메시지와 두 번째 영역의 오른쪽 l-LSB 정보를 암호화와 교차 과정을 진행한 후 첫 번째 영역의 k-LSB에 은닉하여 스테고 이미지를 구성하는 방법을 제안한다. 제안된 방법의 실험결과는 PSNR 값이 52.62로 허용 이미지 품질 수준임을 보여준다.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.68-72
• /
• 2013

최근까지 대부분의 PEMFC MEA(Membrnae and Electrode Assembly) 열화 연구는 전극과 전해질 막 각각 분리되어 연구되었다. 그런데 실제 PEMFC 운전조건에서는 전극과 전해질 막은 동시에 열화된다. 동시열화과정에서 전극열화와 전해질 막 열화는 상호 작용한다. 본 연구에서는 전극열화가 전해질 막 열화에 미치는 영향에 대해 연구하였다. 전극 열화 후 전해질 막을 열화시켜 전극 열화없이 전해질 막을 열화시켰을 때와 비교하였다. 열화전후의 I-V 성능, 수소투과전류, 불소이온 유출 속도(FER), 순환 전압측정(CV), 임피던스, TEM 등을 측정하였다. 전극열화에 의해 백금촉매 활성 면적이 감소하고, 이에 따라 백금 상에서 라디칼/과산화수소 발생속도가 감소함으로써 막 열화속도가 감소함을 보였다.

• 한국의류산업학회지
• /
• 제19권4호
• /
• pp.385-399
• /
• 2017

This study will broaden the application of doll costume product with historical characteristics and the image of unlined cheollik in the $17^{th}$ century period of transition during the Joseon Dynasty. Historical design sources were extracted from old documents and precedent studies. Unlined cheollik of Shin Gyeong-yu, meritorious retainer, were selected as main reference-relic because of various fabric, preserved conditions and definite shape. 'Baby doll' was selected as main model because of consumer preferences and awareness. Design sources from unlined cheollik in the early $17^{th}$ century were about a 1:2 ratio of upper and under parts, removable separated doori-somae, knife-shaped collar (outside), projected square collar (inside), long pleats line, side slit, traditional flat fell seam sewing. Trapezoidal side line, round waistline, and thin fabric were applied in designs because of toddler-body of doll model. Three designs were produced in step 1: Cheollik A focusing on the historical remake (traditional type), Cheollik B with belt and side slit (crossover type), and Cheollik C with back- opening (modern type). In step 2, interview with fashion major student was conducted to increase the utility of designs. As a result, modern trend sources (frill, velcro, round armhole line, slope of sleeves, and floral pattern) were reflected in Cheollik B, C. Finally, three doll cheollik and cheollik-styled doll apron sample were produced. Various versions must be suggested in the study of doll costume products with traditional sources that balance historical characteristics and practicality to improve customer satisfaction.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제18권1호
• /
• pp.35-40
• /
• 2018

Background: The sight of dental injection can bring about severe anxiety in children. Therefore, an alternative method that is convenient, effective, and keeps the needle hidden making it child friendly is necessary. The objective of the study was to compare the efficacy of a camouflaged syringe and conventional syringe on behavior and anxiety in 6-11-year-old children during local anesthesia administration. Methods: The study was a randomized, crossover clinical study including 30 children. Children were separated into two groups. Group 1 consisted of 15 children aged 6-8 years while group 2 consisted of 15 children aged 9-11 years. This study involved two sessions wherein all the children were injected using conventional and camouflaged syringes in separate sessions. Their behavior was assessed using the Faces, Legs, Activity, Cry, Consolability (FLACC) behavior pain scale and anxiety was assessed by measuring changes in pulse rate. Patient and operator preferences were compared. Results: The results showed a lower mean change in pulse rate and FLACC scores in the camouflaged group, suggesting a positive behavior and lesser anxiety with camouflaged syringes than with conventional syringes. Conclusions: The use of camouflaged syringes for anesthesia was demonstrated to be effective in improving the behavior of children and decreasing their anxiety, and is therefore recommended as an alternative to the use of conventional syringes for local anesthesia.