• 펄프종이기술
• /
• 제43권4호
• /
• pp.1-10
• /
• 2011

Beating or refining is an energy intensive process in paper industry. In India, most of the paper industries blend long fibered softwood pulps with short fibered hardwood or agro based pulps to get the paper properties of competitive level. Refining characteristics of the blend of pulps is very crucial with respect to freeness and strength properties. This study has been carried out to understand the refining behavior of three hardwood pulps and a softwood pulp. The hardwood and softwood pulps are blended in different proportions in two different ways; a) blending after their separate refining, and b) blending before refining followed by mixed refining of the blended pulps. Freeness of pulp, strength, optical and surface properties of paper along with formation have been determined and compared for both the refining methods. The fiber classification of refined pulps was also carried out to analyze the effect of refining method on fiber morphology. The mixed refining of hardwood and softwood pulps marginally affects the fiber morphology in comparison to separate refining of pulps. The strength and other properties of paper prepared from mixed refining of pulps are either better or comparable than those of separately refined pulps.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.37-42
• /
• 2006

The paper discusses the combined use of softwood and eucalyptus kraft pulps in the production of printing and writing papers. Looking for process and paper quality optimization, refining pilot plant trails were carried to identify the effects of refining type (mixed or separate) and intensities (specific edge load), and also furnish composition (amount of each pulp in mixture) on final paper quality and process costs. The basic effects on pulp fibers were evaluated against paper quality properties, such as physical strengths, bulk, vessel picking, opacity and porosity, as well as the interactions with papermaking process, such as estimates of paper machine runnability, paper breaks and industrial refining control. The results show that the furnish composition and the type of refining has a significant effect on properties related with both final paper quality and total costs. The best alternative for printing and writing papers was identified for mixed refining, under the lowest refining intensity, and with the highest dosage of eucalyptus pulp.

• 펄프종이기술
• /
• 제35권4호
• /
• pp.8-16
• /
• 2003

The objective of this study was to investigate the potential application of the separated refining system in the papermaking process using cotton pulps. The cotton staple and linter fibers were expected to show a great difference in their refining responses due to their morphological and physical differences. Experiments were conducted to examine the differences in flocculation tendency, CED viscosity, fiber length, handsheet properties and the SEM surface images between staple and linter fibers at a given refining degree. These fibers were also subjected to separated refining in a laboratory-scale beater and in a mill-scale refiner as well. The effect of the separated refining on the refining rates and papermaking properties were evaluated. Results obtained are summarized as follows: 1. Fiber flocculation tendency of cotton staple was estimated to be significantly greater than that of linter fibers; 2. The staple fibers showed higher cellulose DP, longer fiber length and higher sheet strength at a given refining degree compared to linter fibers, but remarkably slower refining rate was observed; 3. The separated refining system exhibited a significant increase in sheet strengths, especiauy in folding endurance, with an increase in the fibrillation on the surface of staple fibers, but slightly lower or comparable fiber length after refining to the mixed refining system; 4. Similar results were also obtained from the machine trial in which about 7-8％ energy saving effects were achived in the separated refining system. On the basis of the results observed in this study, it was concluded that a significant increase in paper strength and a substantial reduction in refining energy consumption could be achieved using the separated refining system for the cotton staple and linter fiber stock refining.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2003년도 The 4th Korea-Italy Workshop
• /
• pp.77-80
• /
• 2003

Hydrocarbon-hydrocarbon separations are one of the most important processes in petroleum refining. Distillation process has been used for separating hydrocarbons, but this conventional process is very energy consuming. Pervaporation separation through polymeric membranes is an emerging process alternative to distillation because of energy savings, compact system installation, reduced capital investment, and other performance attributes. In hydrocarbon separations, polymeric membranes are easily swollen by hydrocarbons and can lose mechanical strength. Chemically robust membranes are needed for the separation of hydrocarbons. In this study, the blend membrane was applied to separate benzene and cyclohexane. This is a model system for aliphatic and aromatic separation. Cyclohexane is also physically very similar to benzene and as a result of the very closing boiling points (0.6$^{\circ}C$), benzene and cyclohexane form an azetrope. Thus the system provides a good model for azeotrope breaking by pervaporation. The semi-quantitative thermodynamic model predicts that the calculated selectivity increases with increasing Hydrin contents in the blend membranes. Pervaporation experiments utilizing various operating temperatures and feed concentrations with different blend membranes are compared with the result from semi-quantitative thermodynamic calculations.

• Journal of the Korean Wood Science and Technology
• /
• 제26권3호
• /
• pp.73-80
• /
• 1998

In order to reconstruct the traditional technology of Korean golden varnish coatings, this study was carried out to separate and determine some main coloring components of the exudates of D. morbifera and its traditionally refined golden varnishes using a process of solvent extractions, chromatographies and spectrometries. The results obtained are as follows: 1. The exudate and its traditional-refined golden varnishes appear to have a kind of natural polyacetylenes because it has some triple bond peaks in FT-IR spectrometry. 2. Some yellowing spots of the polar-solvent extrats from the exudates and refined varnishes separated on TLC appeared under natural drying condition, but those of non-polar solvent extract such as hexane did not. 3. A traditional refining method for reconstructing a Korea golden varnishes was thought to be better than solvent separation because the former had higher triple-bond peaks than the latter in FT-IR spectrometry. 4. One of main conponents in the hexane-extracts of the traditional-refined varnishes and the exudates had the same molcular weighr of 204, but the fragmentation patterns was a little different between the exudate and the refined. in LC-MS soectrometry.

• 한국멀티미디어학회논문지
• /
• 제4권2호
• /
• pp.116-129
• /
• 2001

역 해프토닝(inversehalftoning)의 성능을 향상시키기 위해서는 최적의 평활화 마스크(mask)가 생성되어야 하고, 최적의 평활화 마스크를 생성하기 위해서는 정확한 해프톤 셀 정보가 구해져야 한다. 본 논문에서는, 클러스터드 도트(clustered dot) ordered dither 방법으로 해프토닝된 일반적인 인쇄물 영상을 주 대상으로 해프톤 셀 정보의 정확성을 판정하기 위한 최소 에너지를 정의하고, 퓨리에 공간에서의 피크 형태 분석 및 여러 가지 함수에 의한 피크 모델링을 통해, 제한된 탐색구간에서 타원분해 (dimension decomposition)의 방법을 적용하여 보다 정확하게 근사화된 해프톤 셀 정보를 효율적으로 추출하는 방법을 제안한다. 제안한 방법으로 구한 해프톤 셀 정보를 이용해서 영상의 전체 영역에 대한 해프톤 셀 중심(seed)을 정확하게 추출하는 것을 실험을 통해 확인하였다. 제안한 방법은 퓨리에 공간의 피크 정보를 이용한 텍스쳐 패턴 분석, 칼라 해프톤 영상의 채널분리 및 모아레 패턴 존재 영역 판정 등에 유용하게 활용할 수 있다.

• 복식문화연구
• /
• 제22권5호
• /
• pp.712-727
• /
• 2014

Dahoejangs in the Joseon Dynasty were craftsmen who belonged in the Gyeonggongjang in Hansung government office. Out of 2,841 craftsmen who specialized in 129 types of work, 1 of them were Dahoejangs. Dahoejangs were craftsmen who made cords. However it was not passed down and currently Maedeupjangs are making cords and making Maedeup with the cords they have made. In the Uigwes the composition of Dahoejangs number and types of tools used in creating good for ceremonies are indicated. This study has found records of Dahoejangs from 50 Uigwes. The tools used were indicated as Haesagee, Hapsagee, Hapseongee, Yeonsagee, Sangsagee, Dahoegee, Yungjapan and some others. Haesagee is a tool that winds thread from a skein to a spool. Hapsagee is a tool that combines more than two yarns together. Hapseon is for combining thicker threads. Yeosagee is not a process of scouring for refining, but is assumed to be a tool to twisting yarn. There are no information left about the shape or working methods of Sangsagee but it is considered to be a tool for doubling several threads together. Based on the existing artifacts and painting of Dahoe, it is assumed that threads were woven on usually a round plate or bowl. Youngjapan is considered to be a tool for making tassels. This shows that Dahoejangs made tassels and it was completely separate from making Maedeups. There, it is evident that Dahoejangs made cords as well as tassels but the work of Maedeupjang were constricted to only making Maedeup with the cords given to them.

• 농촌지도와개발
• /
• 제20권4호
• /
• pp.839-869
• /
• 2013

1980년대 말 농식품 시장이 개방된 이후 우리농업은 큰 변화를 거쳐왔다. 농식품 소비시장의 대형화로 주기적 대량거래가 요구되어, 축산과 원예 분야는 물론 농업의 전 분야에서 전업농이 성장하게 되었다. 이로 인해, 농업 현장에서는 생산, 가공, 마케팅, 경영 등을 포함한 포괄적인 현장지식의 필요성이 대두되었으며, 이를 뒷받침 할 FSR&E(영농체계연구 및 지도)의 개념이 지역 특화 시험장 형태로 1992년에 소개되었고, 2009년에는 농림수산식품과학기술법에 따른 농림수산과학기술위원회가 설립되었다. 그러나 여전히 연구사업에서 생산되는 지식과 현장에서 요구되는 지식 간에 차이가 발생하고 있어, 연구 지도사업의 변화를 요구하고 있다. 기초연구와 응용연구를 구분하고, 연구와 지도사업 간의 연계를 개선하며, 현장에서 필요로 하는 포괄적인 지식의 생산과 이전이 이루어져야 한다. 이 연구는 지역 농식품 R&D 체계의 리엔지니어링과 활성화 방안을 제시하고 한다. 각 지역 기관의 연구 지도 업무수행의 역할이 중복되거나 결핍되지 않고 효율적인 업무분배와 협력구조가 이루어지도록 지역 농식품 연구 지도 시스템의 변화가 필요하며, 품목중심의 농업현장 연구 지도(Commodity Based On-Farm R&E)를 실현하여야 한다. 이를 위해 중앙의 연구 지도 사업과는 별도로 인적자원과 인프라구축을 위한 정부의 예산지원이 필요하다. 현재 시군지역으로 이관된 지도기관들의 행정체제를 광역화하여, 일선 지도기관들의 포괄적이고 협력적인 연구와 지도사업이 이루어지도록 할 필요가 있다.