• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.12-14
• /
• 1998

Sensorless PMSM is much studied for the industrial applications and home appliances because a mechanical sensor reduces reliability and increases cost. This paper studies the stability of sensorless speed control of PMSM using state observer. Sensorless control scheme using state observer is known as a scheme having a comparatively good performance. Several papers have studied the stability of state observer control scheme, but have not considered parameter variation which is important to sensorless control. This paper studies the stability through computer simulation in case of parameter variation.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.507-509
• /
• 2015

In this paper, a novel method of sensorless control scheme is proposed to apply on a single phase hybrid SRM used in high speed operation. The proposed method utilizes beneficially permanent magnet field whose performance is motor parameter independent to estimate the rotor position. Also, the current slope is adopted to complete the sensorless control when the motor running with heavy torque at high speed condition. Through this approach, the adjustable turn on/off position can be achieved without prior knowledge of inductance profile which is always employed by many sensorless schemes. And this paper may offer an available method to do the sensorless control in hybrid SRM used for high speed running.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.1144-1145
• /
• 2007

This paper is investigated the sensorless drive for BLDC motor using microprocessor. Since the BLDC motor should be commutated according to a rotor position, the sensors are required to detect the position. But the sensors increase cost and volume, complicate the motor configuration, and do not operate properly in some operating environments such as high temperature conditions, so that the necessity of sensorless commutation algorithm is getting increased. This paper is proposed the method to drive BLDC motor without position-detecting sensor using Back EMF. Back EMF commutation method was implemented the sensorless drive system which could control the rotational speed and monitor the behavior of a motor.

• 전력전자학회논문지
• /
• 제16권5호
• /
• pp.484-493
• /
• 2011

본 논문은 뉴로-퍼지 제어기를 이용한 최적의 퍼지 소속함수에 동조하는 다층 신경회로망을 사용한 성능이 개선된 MPPT 알고리즘을 제안한다. 퍼지 제어기의 성능은 퍼지규칙과 퍼지 소속함수의 폭의 영향을 받는다. 뉴로-퍼지 제어기는 신경망 학습을 통해 퍼지 소속함수의 최적 폭을 이용하기 때문에 기존 퍼지 제어기보다 우수한 응답특성을 갖는다. 실험과 시뮬레이션 결과를 통해 제안된 알고리즘의 우수한 제어특성을 확인한다.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2001년도 학술대회논문집
• /
• pp.181-185
• /
• 2001

This paper presents a digitally speed sensorless control system for induction motor with direct torque control (DTC). The drive is based on Mode1 Reference Adaptive System (MRAS) using state observer as a reference model fat flux estimation. The system are closed loop stator flux and torque observer for wide speed range that inputs are currents and voltages sensing of motor terminal, model reference adaptive control (MRAS) with rotor flux linkages for the speed turning aignal at low speed range, two hysteresis controllers. The Proposed system is verified through simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.919_920
• /
• 2009

본 논문에서는 Full-digitalize 구현으로 부가적인 회로가 필요 없는 EHPS용 BLDC 모터의 센서리스 제어 알고리즘을 제안한다. 제안된 알고리즘을 일반적인 영점검출방법 및 역기전력 추정 센서리스 방법과 비교 분석하고 시뮬레이션을 통해 타당성을 검증한다

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
• /
• pp.207-210
• /
• 1995

In this paper, two representative schemes for vector control of induction motor without speed sensor are studied. First, the two sensorless systems which are implemented by voltage and current source are presented with new ideas and interpretations. Then a linear model around an operating point is proposed. Finally, the stability improvement of these systems are studied and evaluated by computing the trajectories of poles and zeros.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.1410-1414
• /
• 1990

A method of speed sensorless vector control of induction motor is proposed in this paper. This method uses the slip frequency estimated by only the primary voltage and current. As this slip frequency accords with the command value of it, the commanded primary frequency is controlled. The validity of the method is confirmed by the simulation and experimental results.

• 전력전자학회논문지
• /
• 제3권4호
• /
• pp.346-352
• /
• 1998

본 논문에서는 새로운 신경 회로망 유도 전동기 속도 추정 방법을 제안하고, 추정된 속도를 이용하여 속도 센서리스 벡터 제어를 구현한다. 제안된 신경 회로망 속도 추정 방법은 정상 상태뿐 아니라 과도 상태에서도 정확한 속도를 추정한다. 또한 off-line에 의해 사전 학습을 필요로 하지 않고, 유도 전동기의 구동과 동시에 on-line 학습을 통하여 속도를 실시간으로 추정함으로써 구현이 용이하다. 디지털 시뮬레이션과 2.2kW 유도 전동기 시스템을 이용한 실험을 통하여 제안된 알고리즘의 효용성과 성능을 입증한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.524-527
• /
• 2003

This paper proposes speed control system using a Fuzzy Logic Controller(FLC) in order to realize the speed control of Permanent Magnet AC Motor with no sensor. FLC based MRAS(Model Reference Adaptive System) estimates the speed of Permanent Magnet AC Motor. Using the estimated speed, speed control is performed. The experiment is executed to verify the propriety and the effectiveness of the proposed system.