• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.10 no.5
• /
• pp.20-25
• /
• 2011

In this paper, we reviewed the spindle system's motor and bearing and its mode safety for optimal design of a high speed spindle system that exceeds DmN value of 1,500,000. We could verify that it has a separation margin during critical speed by performing critical speed analysis. Also, we have selected an optimal sensoring installation location and actually manufactured & installed the sensor by identifying the stress concentration position in the axial load through finite element analysis to install the built-in piezo electric type load sensor to the spindle housing that can measure and monitor the machining load during high speed rotation of the spindle. Reproducibility is also verified by calibrating the error through the sensor's sensitivity adjustment after comparing the output between the plate dynamoneters and the load sensor to confirm the reproducibility of the load sensor.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.2 no.1
• /
• pp.24-30
• /
• 2007

According to development of wireless communication technologies, we need not only high data rate but low data rate system of low power consumption. This low data rate system is utilized in the field of home automation, health care, sensoring and monitoring, etc. IEEE 802.15.4 LR-WPAN system is the best choice for realizing ubiquitous networking system. In this paper SoC Architecture for IEEE 802.15.4 Low Rate WPAN is designed. IEEE 802.15.4 Low Rate WPAN system serves the functions and realization of home area network. We propose the SoC architecture for 868/915MHz frequency band of IEEE 802.15.4 Low Rate WPAN system. The key issue is to design SoC architecture which provides the function of Low Rate WPAN system to meet the requirement of IEEE 802.15.4 standards.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.05a
• /
• pp.1259-1262
• /
• 2004

Detecting environmental hazards and monitoring remote terrain are among many sensor network applications. In case of fire detection, it is significantly valuable to monitor fire-spot's shape and trend in time. Mobile ad hoc sensor nodes right round are responsible for sensoring, processing and networking packets, or even launching extinguisher. In this paper, we proposed a ring-oriented Multicast architecture based on "Fisheye State Routing" (MFSR) to organize a group of mobile ad hoc sensor nodes in a multicast way. It is familiar with traditional mesh-based multicast protocol [1] in mobile ad hoc network, trying to concentrates on efficiency and robustness simultaneously. Certain applications-based solution for hazards is proposed, quantitative results including architecture and recovery algorithms of MFSR are also investigated in this paper.

• Journal of Smart Tourism
• /
• v.4 no.1
• /
• pp.7-18
• /
• 2024

This study examines Natal in Brazil as a Smart Tourism Destination (STD) based on the perception of public and private managers who are members of the City Tourism Council. The research utilizes a systemic perspective of STD proposed by Ivars-Baidal et al. (2016), consisting of three interconnected levels: Strategic-Relational, Instrumental, and Applied. The findings reveal that Natal faces challenges in terms of infrastructure, accessibility, security, connectivity, and sensoring, which hinder its progress as STD. The study also identifies opportunities in the form of governance structures with smart destinations and the inclusion of smartness guidelines in the City Master Plan. The research aims to contribute to the theoretical understanding of STD and its application in destination development. It highlights the need for innovative planning and management in Natal, emphasizing that adopting the STD from a systemic perspective can enhance competitiveness and elevate the level of smartness in the destination.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.2
• /
• pp.223-228
• /
• 2016

People try to maintain optimal sleep activity to a changing attitude 20-30 times while sleeping 7-8 hours a day. In order to provide optimal sleep, we need to develop sensing device for apply effective various sleep data acquired through display device that can provide program and information which process and analyze information printed out from sensor and sensing system. In this paper, we analyze sleep pattern to detect the toss and turn while a person's sleeping and we develop a wellness pillow that can be active on sleep health management based on the analyzed data for sleep patterns.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.5
• /
• pp.113-121
• /
• 2013

The road icing forecast and snow detection system using state evaluation algorithm of multi sensor optimizes snow melting system to control spread time and amount of chemical spread application This system operates integrated of contact/non-contact sensor and infrared camera. The state evaluation algorithm of the system evaluates road freezing danger condition and snowfall condition (snowfall intensity also) using acquired data such as temperature/humidity, moisture detection and result of image signal processing from field video footage. In the field experiment, it proved excellent and reliable evaluated result of snowfall state detection rate of 89% and wet state detection rate of 94%.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2002.10a
• /
• pp.216-219
• /
• 2002

Conventional piezoelectric lead-zirconate-titanate (PZT) senor has high sensitivity, but it is very brittle. Recently polymer films such as polyvinylidene fluoride (PVDF) have been used use as a sensor. The advantages of PVDF are the flexibility and mechanical toughness. Simple process and possible several shapes are also additional advantages. PVDF sensor can be directly embedded and attached to a structure. In this study, PVDF sensor was embedded in single glass fiber/epoxy composites whereas PZT sensor with AE was attached to single fiber composites (SFC). Piezoelectric sensor responds to interfacial damage of SFC. The signals measured by PVDF sensor were compared to PZT sensor. PZT sensor detected the signals of fiber fracture, matrix crack, interfacial debonding and even sensor delamination, whereas PVDF sensor only detected fiber fracture signals so far, because PZT sensor is much more sensitive than current PVDF sensor. Wave voltage of fiber fracture measured by PVDF sensor was lower than that of PZT sensor, but the results of fast Fourier transform (FFT) analysis were same. Wave velocity using two PZT sensors was also studied to know the internal and surface damage effect of epoxy specimens.

• Spatial Information Research
• /
• v.16 no.1
• /
• pp.65-77
• /
• 2008

There have been many studies and technologies that define a current location of a moving vehicle with GPS(Global Positioning System). However, the navigation system with GPS has troubles to search an optimized route considering data such as realtime parking status and road conditions. Moreover, the GPS systems show malfunction in the downtown with very tall buildings, underground parking lot and the inside of buildings. On the contrary, the RFID systems are able to reflect real-time status of parking lots and roads in the downtown. This paper proposes a system of guiding path for parking lots to consider real-time constraints based on RFID. The results obtained from the implemented system show smooth guiding of a new route after immediately sensoring the change of the information of parking lots and roads: if a parking lot that a vehicle is heading to is fully occupied, the system re-searches a new route for a neighbor parking lot and immediately transfers it to customer's mobile, and if the designated route is under construction, the system guides a detour path. The proposed method will be useful for advanced integrated parking control system.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.433-443
• /
• 2022

Purpose: In this paper, we propose a study of deep learning algorithms that estimate and predict sarcopenia by exploiting the high penetration rate of smart devices. Method: To utilize deep learning techniques, experimental data were collected by using the inertial sensor embedded in the smart device. We implemented a smart device application for data collection. The data are collected by labeling normal and abnormal gait and five states of running, falling and squat posture. Result: The accuracy was analyzed by comparative analysis of LSTM, CNN, and RNN models, and binary classification accuracy of 99.87% and multiple classification accuracy of 92.30% were obtained using the CNN-LSTM fusion algorithm. Conclusion: A study was conducted using a smart sensoring device, focusing on the fact that gait abnormalities occur for people with sarcopenia. It is expected that this study can contribute to strengthening the safety issues caused by sarcopenia.

• Korean journal of applied entomology
• /
• v.32 no.3
• /
• pp.354-371
• /
• 1993

Behavior of adult females of the smoky brown cockroach was observed for 10-15 days continuously by using computer and the automatic sensoring system. Under the light condition of l2L~ 12D, individual variations were generally higher and the periodicity appeared less in terms of the presence time at the micro-habitats and the locomotory activity. The smoky brown cockroach appeared 20.42, 11.50, 6.31 and 2.66 % in a day in averages respectively at the shelter and the places for other individuals, feeding and drinking. It stayed 20.29 % in a day at the shelter when food, water, and other individuals were not supplied. Visiting rates were higher at the feeding and dnnking places than at. the ot.her micro-habitats. The degree of t.he locomotory activity was relatively lower when food, water, and other individuals were not supplied t.han when they were supplied. The Pnncipal Component Analysis (PCA) on the presence at the micro-habitats showed that. t.he presence pattern for each mdividual appeared differently (Q mode) while the differem time zones were grouped to the photophase and scotophase (R mode). When food, water, and other individuals were supplied the degree of grouping was higher at the shelter than at the places for feeding and drinking. When the act.ivityand the presence time at the different micro-habitats were jointly analyzed by PCA, the achvity of the female smoky brown cockroach appeared in relation with the presence time ( %) at the places for feeding and other individuals.