• Current Optics and Photonics
• /
• v.2 no.4
• /
• pp.303-307
• /
• 2018

We propose a simple ultraviolet (UV) sensor consisting of a conventional single-mode optical fiber capped with an azobenzene-moiety-containing polymer. The UV light changes the dimensions of the azobenzene polymer, as well as the refractive index of the material. Incident light with a wavelength of 1550 nm was reflected at the fiber/polymer and polymer/air interfaces, and interference of the reflected beams resulted in spectral interference that shifted the wavelength by 0.78 nm at a UV input power of $2.5mW/cm^2$. The UV sensor's response to wavelength is nonlinear and stable. The response speed of the sensor is limited by detection noise, which can be improved by modifying the insertion loss of the UV sensor and the signal-to-noise ratio of the detection system. The proposed compact UV sensor is easy to fabricate, is not susceptible to electromagnetic interference, and only reacts to UV light.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.10
• /
• pp.1905-1913
• /
• 2006

The researches about the hardware and the software implementing ubiquitous sensor network have great rush in recent years. This paper deals the development of a sensor node with the dual interface which also has an RF wireless interface while has an Bluetooth interface used widely in present. This sensor node includes a Atmeg32 microcontroller, a Bluetooth module, a RF module. a temperature-humidity sensor. and I also develop the F/Ws controlling each modules with C language using GCC compiler. The sensor node developed can reaches 15m with Bluetooth interface and 60m with RF interface. It works stably with the voltage above 5V and it consumes currents 21mA average in idle mode, 63mA average in active mode.

• IE interfaces
• /
• v.23 no.2
• /
• pp.108-117
• /
• 2010

Wireless sensor network may be installed where it is hard to access or where one has to constantly gather data without any human's monitoring. Sensors which compose a sensor network are usually small with poor battery capacities and thus energy-efficient usage is very important because of difficulties in replacing or recharging the batteries to make the lifetime of the whole sensor network longer. LEACH protocol, a well-known hierarchical routing protocol, may resolve this problem by distributing the role of cluster header evenly to the sensor nodes in the whole area of network at each round. In this thesis, we introduce a variant of LEACH protocol which considers the distance between base station and sensors in the way that if a node is far from the base station then the probability that this node becomes a cluster header is low. Experiments to evaluate the energy efficiency and the ability to collect the information show that the proposed method in this paper has maintained much wider sensing area while keeping the energy efficiency same as LEACH.

• Journal of Biomedical Engineering Research
• /
• v.29 no.6
• /
• pp.457-465
• /
• 2008

HL7(Health Level 7) is a standard for exchanging medical and healthcare data among different medical information systems. As the ubiquitous era is coming, in addition to text and imaging information, a new type of data, i.e., streaming sensor data appear. Since the HL7 is not covering the interfaces among the devices that produces sensor data, it is expected that sooner or later the HL7 needs to include the biomedical sensors and sensor networks. The IEEE 1451 is a family of standards that deals with the sensors, transducers including sensors and actuators, and various wired or wireless sensor networks. In this paper, we consider the possibility of interoperability between the IEEE 1451 and HL7. After we propose a format of messages in HL7 to include the IEEE 1451 TEDS, we present some preliminary results that show the possibility of integrating the two standards.

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2229-2236
• /
• 2021

In nuclear-related facilities, such as nuclear power plants, research reactors, accelerators, and nuclear waste storage sites, radiation detection, and mapping are required to prevent radiation overexposure. Sensor network systems consisting of radiation sensor interfaces and wxireless communication units have become promising tools that can be used for data collection of radiation detection that can in turn be used to draw a radiation map. During data collection, malfunctions in some of the sensors can occasionally occur due to radiation effects, physical damage, network defects, sensor loss, or other reasons. This paper proposes a reproduction strategy for radiation maps using a U-net model to compensate for the loss of radiation detection data. To perform machine learning and verification, 1,561 simulations and 417 measured data of a sensor network were performed. The reproduction results show an accuracy of over 90%. The proposed strategy can offer an effective method that can be used to resolve the data loss problem for conventional sensor network systems and will specifically contribute to making initial responses with preserved data and without the high cost of radiation leak accidents at nuclear facilities.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.6
• /
• pp.82-94
• /
• 2008

The purpose of web-sensor is to transmit the measured sensor data and the related information to remote user. Since the user exists at remote place, the sensor information must be trustworthy, and the diagnosis for sensors should be easy to handle. To make sure of these issues, IEEE 1451 for smart sensor had been presented in the past. This research proposes the smart web sensor. The proposed smart web sensor is based on IEEE 1451.0, therefore most of the sensor interfaces are able to be used, and could realize the smart sensor by using TEDS information. Also it has the user-friendly web-service by using XML so that the remote user can handle easily the every possible information related to sensor. This research presents reference model for smart web sensor, and to prove how valuable it is, web-service using gas sensor is implemented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.379-382
• /
• 2007

In ubiquitous sensor networks(USNs), various sensing devices deployed in wireless sensor networks collect meaningful data from physical environments and the data are delivered to neighbor node through radio interfaces for further processing. In this processing, efficiently using of the limited source of low power and low cost is USNs on the point of energy consumption. In this paper, we measure and analyze the power consumption of LR-WPAN.

• Proceedings of the KIEE Conference
• /
• 1996.07b
• /
• pp.1272-1274
• /
• 1996

This paper presents the development of tactile sensor systems for robot hand which are truly usable, robust, reliable and cheap system. The sensor incorporates multiple sensing subsystems for detecting distributed contact forces and surface characteristics. The fabrication and experimental evaluation of the tactile system and its electric interfaces are described. The results indicate that the system provides reasonable performances for practical applications requiring manipulation with tactile feedback.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.71-78
• /
• 2022

Wearable devices have the potential to revolutionize future medical diagnostics and personal healthcare. The integration of biosensors into scalable form factors allow continuous and noninvasive monitoring of key biomarkers and various physiological indicators. However, conventional wearable devices have critical limitations owing to their rigid and obtrusive interfaces. Recent developments in functional biocompatible materials, micro/nanofabrication methods, multimodal sensor mechanisms, and device integration technologies have provided the foundation for novel skin-interfaced bioelectronics for advanced and user-friendly wearable devices. Nonetheless, it is a great challenge to satisfy a wide range of design parameters in fabricating an authentic skin-interfaced device while maintaining its edge over conventional devices. This review highlights recent advances in skin-compatible materials, biosensor performance, and energy-harvesting methods that shed light on the future of wearable devices for digital health and personalized medicine.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.11
• /
• pp.78-83
• /
• 1992

The current-voltage characteristics at SrO${\cdot}6Fe_{2}O_{3}$ electronic ceramics interfaces have been studied using cyclic voltammetric methods. The symmetrical and stable cyclic voltammograms, which indicate the same anodic and cathodic process, are obtained on the whole experiments. The approximate saturation current is 50$\mu$A but the value depends on the experimental processes of the electrode specimens. The current-voltage characteristics of SrO${\cdot}6Fe_{2}O_{3}$ electronic ceramics in dilute aqueous electrolytes or double deionized water are determined by the water adsorption process and the interconnected porosity effect. On the other hand, the current-voltage characteristics in relatively concentrate aqueous electrolytes are determined by the ionic adsorption process and the related electrical double layers. The SrO${\cdot}6Fe_{2}O_{3}$ electronic ceramics can be directly used as an electrochemically stabled resistor, electrode or a humidity sensor.