• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.614-619
• /
• 2004

The line-of-sight (LOS) stabilization system is a precision electro-mechanical gimbals assembly for rejecting vibration to isolate the load from its environment and point toward the target in a desired direction. This paper describes the design of gimbals system to reject the disturbance and to improve stabilization. To generate movement commands for the actuators in the stabilization system, the control system uses a sensor of angular rotation. The controller is a DSP with transducer and actuator interfaces. Unknown parameters of the gimbals are estimated using the signal compression method. The cross-correlation coefficient between the impulse response from the assumed model and the one from model of the gimbals is used to obtain the better estimation. And SMCPE (sliding mode control with perturbation estimation) is used to control the gimbals. SMCPE provides robustness of the control against the modeling deficiencies and unknown disturbances. In order to compare the performance of SMCPE with the classical SMC, a sample test result is presented.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1383-1388
• /
• 2004

The flow characteristics in the blade passage of a low speed axial flow fan have been investigated by experimental analysis using a rotating hot-wire sensor for design and off-design operating conditions. The results show that the tip leakage vortex is moved upstream when flow rate is decreased, thus disturbing the formation of wake flow near the rotor tip. The tip leakage vortex interfaces with blade pressure surface, and results in high velocity fluctuation near the pressure surface. From the relative velocity distributions near the rotor tip, large axial velocity decay is observed at near stall condition, which results in large blockage compared to that at the design condition. Througout the flow measurements using a quasi-orthogonal measuring points to the tip leakage vortex, it is noted that the radial position of the tip leakage vortex is distributed between 94 and 96 percent span for all flow conditions. High spectrum density due to the large fluctuation of the tip leakage vortex is observed near the blade suction surface below the frequency of 1000 Hz at near stall condition.

• 산업공학
• /
• 제20권3호
• /
• pp.288-297
• /
• 2007

Success of semiconductor/LCD industry depends on its yield and quality of product. For the purpose, FDC (Fault Detection and Classification) system is used to diagnose fault state in main manufacturing processes by monitoring time series data collected by equipment sensors which represent various conditions of the equipment. The data set is segmented at the start and end of each product lot processing by a trigger event module. However, in practice, segmented sensor data usually have the features of data asynchronization such as different start points, end points, and data lengths. Due to the asynchronization problem, false alarm (type I error) and missed alarm (type II error) occur frequently. In this paper, we propose a robust process fault detection system by integrating a process event detection method and a similarity measuring method based on dynamic time warping algorithm. An experiment shows that the proposed system is able to recognize abnormal condition correctly under the asynchronous data situation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2346-2349
• /
• 2005

Distributed Autonomous Robotic System (DARS) is defined as a system that independent autonomous robots in the restricted environments infer their status from pre-assigned conditions and operate their jobs through the cooperation with each other. In the DARS, a robot contains sensor part to percept the situation around themselves, communication part to exchange information, and actuator part to do a work. Especially, in order to cooperate with other robots, communicating with other robots is one of the essential elements. Because Bluetooth has many advantages such as low power consumption, small size module package, and various standard protocols, Bluetooth is rated as one of the efficient communicating technologies which can apply to small-sized robot system. In this paper, we will develop Bluetooth communicating system for autonomous robots such as DARS robots. For this purpose, The Bluetooth communication system must have several features. The first, this system should be separated from other robot parts and operate spontaneously and independently. In other words, this communication system should have the ability to organize and maintain and reorganize a network scheme. The next, this system had better support any kinds of standard interfaces in order to guarantee flexible applicability to other embedded system. We will discuss how to construct and what kind of procedure to develop the network system.

• 디지털콘텐츠학회 논문지
• /
• 제15권4호
• /
• pp.473-480
• /
• 2014

오늘날 컴퓨터의 사용이 대중화 되면서 키보드나 마우스와 같은 기존의 사용자 인터페이스에 비해 보다 편리하고 자연스러운 인터페이스에 대한 연구가 활발히 진행되면서, 최근 마이크로소프트의 동작 인식 모듈인 키넥트에 대한 관심이 높아지고 있다. 키넥트는 내장된 센서를 통해 신체의 주요 관절의 움직임 및 깊이 정보를 인식할 수 있으며 내장 마이크를 통해 간단한 음성인식도 가능하다. 본 논문에서는 OpenCV 라이브러리를 키넥트에 접목하여, 키넥트의 깊이 데이터, skeleton tracking, labeling 알고리즘으로 손 영역 추출 및 움직임의 정보를 인식하여 가상 마우스와 가상 키보드를 구현하고, 음성인식을 통해 기존 입력 장치의 기능을 구현하는 것을 목표로 한다.

• 한국지능시스템학회논문지
• /
• 제23권1호
• /
• pp.29-34
• /
• 2013

본 논문은 애드혹 통신을 기반으로 아이폰의 가속도 센서를 사용하여 이동로봇을 무선 제어하는 연구에 대하여 다룬다. 이동로봇을 아이폰으로 무선제어하기 위한 방법으로 사용자 원격제어와 자율제어 방법이 제안되었다. 궤적 추종제어 알고리즘의 효율성을 평가하기 위하여 아이폰의 인터페이스를 기반으로 모니터에 그려진 궤적을 가상로봇이 추종하는 시뮬레이터를 개발하였다. 제안된 시뮬레이터에서는 궤적 추종제어를 위해 이동로봇을 제어할 때 컴퓨터에서 해당 알고리즘을 이용하여 미리 시뮬레이션이 가능하며 사용자에 의한 원격제어와의 결과 비교도 보여준다. 연구의 결과로 제안된 시뮬레이터가 이동로봇에 자율이동제어 방법을 사용할 때, 자율추종 알고리즘의 적합성과 효율성을 미리 검사 하는데 사용될 수 있음을 보여준다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.822-827
• /
• 2003

Topological maps have drawn more attention recently because they are compact, provide natural interfaces, and are applicable to path planning easily. To build a topological map incrementally, Voronoi diagram was used by many researchers. The Voronoi diagram, however, has difficulty in applying to arbitrarily shaped objects and needs long computation time. In this paper, we present a new method for global topological map from the local topological maps incrementally. The local topological maps are created through a thinning algorithm from a local grid map, which is built based on the sensor information at the current robot position. A thinning method requires simpler computation than the Voronoi diagram. Localization based on the topological map is usually difficult, but additional nodes created by the thinning method can improve localization performance. A series of experiments have been conducted using a two-wheeled mobile robot equipped with a laser scanner. It is shown that the proposed scheme can create satisfactory topological maps.

• 대한전자공학회논문지SP
• /
• 제40권6호
• /
• pp.10-19
• /
• 2003

현재 상용화된 지문인식 시스템은 지문 입력기를 구동하는데 필요한 함수가 표준화 되어있지 않기 때문에 입력기 사이의 호환이 불가능하다. 본 연구의 목적은 지문인식 시스템이 대중화됨에 따라 앞으로 지문인식 시장에서 수요가 예상되는 다양한 지문 입력기 사이의 지문인식이 가능한 시스템의 개발이다. 본 논문에서는 광학식, 반도체식, 열감지 방식의 지문 입력기를 대상으로 하여 지문인식 시스템을 설계 구현하였으며, 융선 개수 정보의 추출 방법과 융선 개수 정보를 이용한 정합 방법을 제안하였다.

• 한국의류산업학회지
• /
• 제18권6호
• /
• pp.733-745
• /
• 2016

This paper provides a review of wearable textile strain sensors that can measure the deformation of the body surface according to the movements of the wearer. In previous studies, the requirements of textile strain sensors, materials and fabrication methods, as well as the principle of the strain sensing according to sensor structures were understood; furthermore, the factors that affect the sensing performance were critically reviewed and application studies were examined. Textile strain sensors should be able to show piezoresistive effects with consistent resistance-extension in response to the extensional deformations that are repeated when they are worn. Textile strain sensors with piezoresistivity are typically made using conductive yarn knit structures or carbon-based fillers or conducting polymer filler composite materials. For the accuracy and reliability of textile strain sensors, fabrication technologies that would minimize deformation hysteresis should be developed and processes to complement and analyze sensing results based on accurate understanding of the sensors' resistance-strain behavior are necessary. Since light-weighted, flexible, and highly elastic textile strain sensors can be worn by users without any inconvenience so that to enable the users to continuously collect data related to body movements, textile strain sensors are expected to become the core of human interface technologies with a wide range of applications in diverse areas.

• 한국지능시스템학회논문지
• /
• 제15권7호
• /
• pp.805-812
• /
• 2005

본 논문은 스마트 홈과 같이 다양한 센서 및 제어 네트워크가 밀집되어 있는 유비쿼터스 환경 하에서 복잡한 인터페이스의 사용에 대한 사용자의 인지 부담(cognitive load)을 줄이고, 개인화된(personalized) 서비스를 자율적으로 제공하기 위한 새로운 사용자 행동 패턴 선호도 학습기법을 제안하였다. 이를 위해 지식 발견(knowledge discovery)을 위한 평생 학습(life-long learning)의 관점에서 퍼지귀납(fuzzy inductive) 학습 방법론을 제안하며, 이것은 수치 데이터로부터 입력 공간에 대한 효율적인 퍼지 분할(fuzzy partition)을 얻어내고 일관성 있는(consistent) 퍼지 상관 롤(fuzzy association rule)을 얻어내도록 한다.