• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권11호
• /
• pp.3145-3162
• /
• 2023

As an important technology of the internetwork, wireless sensor network technique plays an important role in indoor localization. Non-line-of-sight (NLOS) problem has a large effect on indoor location accuracy. A location algorithm based on improved particle filter and directional probabilistic data association (IPF-DPDA) for WSN is proposed to solve NLOS issue in this paper. Firstly, the improved particle filter is proposed to reduce error of measuring distance. Then the hypothesis test is used to detect whether measurements are in LOS situations or NLOS situations for N different groups. When there are measurements in the validation gate, the corresponding association probabilities are applied to weight retained position estimate to gain final location estimation. We have improved the traditional data association and added directional information on the original basis. If the validation gate has no measured value, we make use of the Kalman prediction value to renew. Finally, simulation and experimental results show that compared with existing methods, the IPF-DPDA performance better.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 춘계종합학술대회 A
• /
• pp.857-860
• /
• 2008

본 논문에서는 센서 노드의 위치를 추정하기 위해 서로 다른 센서노드의 신호세기를 기록한 RSS table을 활용하여 노드가 존재하는 영역을 추정하고, 해당 영역에 속하지 않는 공간을 순차적으로 제거하는 cooperative localization 알고리즘을 제안한다. 각각의 센서노드는 신호세기를 모니터링 하고, 신호세기의 범위에 따라 센서노드의 존재 가능 영역을 배제하게 되며 최종적으로 존재 가능 영역의 중심(centroid)을 노드의 위치로 추정하게 된다. 이러한 과정은 RSS table에 기록된 모든 노드들에 대해 반복적으로 적용되고 이를 통해 미지의 노드들에 대한 정밀한 위치추정이 가능하다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.87-98
• /
• 1999

This study is concentrated on the development of real-time estimation model and vision control method as well as the experimental test. The proposed method permits a kind of adaptability not otherwise available in that the relationship between the camera-space location of manipulable visual cues and the vector of manipulator joint coordinates is estimate in real time. This is done based on a estimation model ta\hat generalizes known manipulator kinematics to accommodate unknown relative camera position and orientation as well as uncertainty of manipulator. This vision control method is roboust and reliable, which overcomes the difficulties of the conventional research such as precise calibration of the vision sensor, exact kinematic modeling of the manipulator, and correct knowledge of position and orientation of CCD camera with respect to the manipulator base. Finally, evidence of the ability of real-time vision control method for manipulator's position control is provided by performing the thin-rod placement in space with 2 cues test model which is completed without a prior knowledge of camera or manipulator positions. This feature opens the door to a range of applications of manipulation, including a mobile manipulator with stationary cameras tracking and providing information for control of the manipulator event.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.925-930
• /
• 2008

Many sensor network applications require that each node's sensor data stream be annotated with its physical location in some coordinate system. Equipping GPS on every sensor node is often expensive and does not work in indoor deployments. Recently, cricket-based localization system is often used for indoor localization system. It is very important to know the exact position of beacons in cricket-based localization system for identifying moving sensor node's position. In this paper, a new method, Mobile Listener Detect Algorithm (MLD) which can automatically calculate the unknown newly installed beacons is proposed. For the verification of the feasibility of the proposed scheme, we have conducted several experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.696-697
• /
• 2015

In this paper, the shape of the slit to provide a view of the sensor in such a manner as to encode the rotor position information using a single sensor for studies of economic rotor position and speed detection method for electric motor drive has a special electronic commutator bar-and proposes a robust encoder can produce a rotor position information for each of the woman, and reads out the location information by using the position detection method of the proposed new method compared to traditional DSP Capture function of incremental encoder that its validity was verified through experiments.

• 반도체디스플레이기술학회지
• /
• 제10권2호
• /
• pp.49-56
• /
• 2011

In recent years, owing to the development of the image processing technology, the research to build control system using a vision sensor is stimulated. However, the time delay must be considered, because it works of time to get the result of an image processing in the system. It can be seen as an obstacle factor to real-time control. In this paper, using the pattern matching technique, the location of two objects is recognized from one image which was acquired by a camera. And it is implemented to a position control system as feedback data. Also, a possibility was shown to overcome a problem of time delay using PID controller. A number of experiments were done to show the validity of this study.

• ETRI Journal
• /
• 제38권3호
• /
• pp.560-567
• /
• 2016

To solve the problem of parameter optimization in image sensor-based visible light positioning systems, theoretical limits for both the location and the azimuth angle of the image sensor receiver (ISR) are calculated. In the case of a typical indoor scenario, maximum likelihood estimations for both the location and the azimuth angle of the ISR are first deduced. The Cramer-Rao Lower Bound (CRLB) is then derived, under the condition that the observation values of the image points are affected by white Gaussian noise. For typical parameters of LEDs and image sensors, simulation results show that accurate estimates for both the location and azimuth angle can be achieved, with positioning errors usually on the order of centimeters and azimuth angle errors being less than $1^{\circ}$. The estimation accuracy depends on the focal length of the lens and on the pixel size and frame rate of the ISR, as well as on the number of transmitters used.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.371-372
• /
• 2016

In this paper, the encoder of the hybrid type which can use a single position sensor in order to overcome the use of multiple signal lines and the reliability reduction for the location information acquisition caused by using a plurality of position detectors to acquire the position information of the rotor offer. Encoder of the proposed method was the replacement location information generating function by the plurality of sensors to the Capture function of the shape and the microcomputer of the encoder plate. Capture of the DSP function was verified through experiments using the in order to verify the validity of the detection by the proposed method and the hybrid encoder position prototyping, a means.

• 한국정보기술학회 영문논문지
• /
• 제8권2호
• /
• pp.27-39
• /
• 2018

In this paper, we describe the algorithms, EEG classification methods, and position data analysis methods using EEG and ADS1299 sensors. In addition, it is necessary to manage the amount of real-time data of location data and EEG data and to extract data efficiently. To do this, we explain the process of extracting important information from a vast amount of data through a cloud server. The electrical signals extracted from the brain are measured to determine the psychological state and health status, and the measured positions can be collected using the position sensor and triangulation method.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.792-799
• /
• 2017

The real time unmanned monitoring system of an equipment's internal parts and condition requires the monitoring device to be able to stop at a set location on the rail. However, due to the slip between the driving surface and the roller, an error occurs between the actual position and the command position. In this paper, a method to compensate the position error due to the roller slip is proposed. A proximity sensor located at both ends of the rail detects the starting point and the maximum position pulse, linearly compensating the error between the angular position of the motor and the mechanically fixed starting and maximum position pulse of the rail in forward and reverse direction. Moreover, unlike the existing servo position controller, the motor adopts the position detection method of Hall sensor in BLDC (Brushless DC) and applies an algorithm for low-speed driving so that a stable position control is possible. The proposed rail guided unmanned monitoring system with driving slip compensator was tested to verify the effectiveness.