• The KIPS Transactions:PartA
• /
• v.17A no.3
• /
• pp.145-152
• /
• 2010

Most wearable system for mobile healthcare applications consists of three parts. The first part is the sensing elements based on bio-signal, the second is the circuit module for control, data acquisition and wireless communication and control and the third is garment with a built-in electrodes and circuits. The existing healthcare garment systems have to find a solution to signal-wire and uncomfortable and inappropriate electrode to long-term attachment. Even if the wireless communication is used for healthcare garment system, the interface between sensors and circuits have to use wires. To solve these problems, this paper use electrode using PEDOT coated PVDF nanoweb for ECG signal and PVDF film sensor for respiratory signal. And, we constructed garment network using digital yarn of 10um, and transmitted ECG and respiratory signal to mobile phone through the integrated circuit with bluetooth called station To evaluate feasibility of the proposed mobile healthcare garment system, we experimented with transmission and measurement of ECG and respiratory signal using nanoweb electrode and digital yarn. We got a successful result without noise and attenuation.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.461-467
• /
• 2014

Active queue management (AQM) algorithms run on routers and detect incipient congestion by typically monitoring the instantaneous or average queue size. When the average queue size exceeds a certain threshold, AQM algorithms infer congestion on the link and notify the end systems to back off by proactively dropping some of the packets arriving at a router or marking the packets to reduce transmission rate at the sender. Among the existing AQM algorithms, random early detection (RED) is well known as the representative queue-based management scheme by randomizing packet dropping. To reduce the number of timeouts in TCP and queuing delay, maintain high link utilization, and remove bursty traffic biases, the RED considers an average queue size as a degree of congestions. However, RED do not well in the specified networks conditions due to the fixed parameters($P_{max}$ and $TH_{min}$) of RED. This paper addresses a extended RED to be adapted in various networks conditions. By sensing network state, $P_{max}$ and $TH_{min}$ can be automatically changed to proper value and then RED do well in various networks conditions.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.9
• /
• pp.1593-1604
• /
• 2016

Recently, bacterial quorum quenching (QQ) has been proven to have potential as an innovative approach for biofouling control in membrane bioreactors (MBRs) for advanced wastewater treatment. Although information regarding the microbial community is crucial for the development of QQ strategies, little information exists on the microbial ecology in QQ-MBRs. In this study, the microbial communities of biofilm were investigated in relation to the effect of QQ on anoxic/oxic MBRs. Two laboratory-scale MBRs were operated with and without QQ-beads (QQ-bacteria entrapped in beads). The transmembrane pressure increase in the QQ-MBRs was delayed by approximately 100-110% compared with conventional- and vacant-MBRs (beads without QQ-bacteria) at 45 kPa. In terms of the microbial community, QQ gradually favored the development of a diverse and even community. QQ had an effect on both the bacterial composition and change rate of the bacterial composition. Proteobacteria and Bacteroidetes were the most dominant phyla in the biofilm, and the average relative composition of Proteobacteria was low in the QQ-MBR. Thiothrix sp. was the dominant bacterium in the biofilm. The relative composition of Thiothrix sp. was low in the QQ-MBR. These findings provide useful information that can inform the development of a new QQ strategy.

• KIISE Transactions on Computing Practices
• /
• v.22 no.11
• /
• pp.576-582
• /
• 2016

Currently, every person possesses a smart phone due to the development of the IT industry. However, crosswalk pedestrian accidents have been sharply increasing due to smart phone use. If a traffic light can recognize smart phones when a smart-phone user approaches and arrives at a given sign, many accidents could be reduced by using beacon signals. Before the era of smart phones, the accident rate involving cell phone use was relatively low. Nevertheless, when considering the development of IT equipment that produces a threat to human life, government cannot regulate smart phone use outside. The purpose of this paper is to indirectly warn a smart phone user in order to reduce the accident rates.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.7B
• /
• pp.595-601
• /
• 2006

This study presents an ultrasonic location awareness system for the ubiquitous computing with absolute position. The flight time of ultrasonic waves is determined by a period detecting technique which is able to extend the sensing range compared with traditional methods. For location awareness, ultrasonic waves are sent successively from each ultrasonic transmitter and synchronized by radio frequency (RF) signal, where the transmitting part is fixed and the receiving part is movable. To expand the recognizing range, cell matching technique and coded ultrasonic technique are introduced. The experimentation for various distances is accomplished to verify the used period detecting technique of U-SAT system. The positioning accuracy by using cell matching is also verified by finding the locations of settled points and the usability of coded ultrasonic technique is verified. As a result, the possibility of ultrasonic location awareness system for the ubiquitous computing can be discussed as a pseudo-satellite system with low cost, a high update rate, and relatively high precision, in the places where GPS is not available.

• Current Optics and Photonics
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2020

We research a system of compressed-sensing computational ghost imaging (CSCGI) based on the intensity fluctuation brought by turbulence. In this system, we used the gamma-gamma intensity-fluctuation model, which is commonly used in transmission systems, to simulate the CSCGI system. By setting proper values of the parameters such as transmission distance, refractive-index structure parameter, and sampling rates, the peak signal-to-noise ratio (PSNR) performance and bit-error rate (BER) performance are obtained to evaluate the imaging quality, which provides a theoretical model to further research the ghost-imaging algorithm.

• Spatial Information Research
• /
• v.21 no.1
• /
• pp.87-100
• /
• 2013

Recently, the use of locational information is growing rapidly. GPS technology has been adopted generally for obtaining locational information in outdoor spaces. In the other hand, the researches on indoor positioning have been carried out applying WLAN, RFID or Bluetooth technology because of the multi-path interference of GPS signal caused by the physical obstacles such as walls or columns in buildings. However, such technologies for indoor positioning cost too much to build sensing infrastructure and compute-intensive processes are involved. Furthermore, the accuracy of location estimation is variable caused by interior structures in buildings. In this study, to make up for the limitations, descriptive data such as phone number, unique room numbers, or business names readily available in mixed-use buildings is used for extracting location information. Furthermore, during the process, a geocoding method using character matching is applied to this study enabling prompt location estimation and sublating the fluctuation of accuracy caused by interior structures. Based on the proposed method in this study, an architecture is designed, and three-dimensional viewer program is developed for the implementation of this study. Also, this research is quantitatively analyzed through match rate and processing time of proposed method.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.2
• /
• pp.159-172
• /
• 2006

In this study, the series of Landsat TM/ETM+ images was acquired to extract land surface temperature for wide-area and executed geometric correction and radiometric correction. And the land surface temperature was extracted using NASA Model, and achieved the first correction by performing land coverage category for study area and applied characteristic emission rate. Land surface temperature which was acquired by the first correction was analyzed in correlation with Meteorological Administration's temperature data by regression analysis, and established correction formula. And I wished to improve accuracy of land surface temperature extraction using satellite image by second correcting deviations between two data using establishing correction formula. As a result, land surface temperature acquired by 1st and 2st correction could be corrected in mean deviation of about ${\pm}3.0^{\circ}C$ with Meteorological Administration data. Also, I could acquire land surface temperature about study area by higher accuracy by applying to other Landsat images for re-verification of study results.

• Korean Journal of Agricultural Science
• /
• v.42 no.1
• /
• pp.63-71
• /
• 2015

Path planning is an essential part for traveling and mowing of autonomous lawn mower tractors. Objectives of the paper were to analyze operation patterns by a skilled farmer, to extract and optimize waypoints, and to demonstrate generation of formatted planned path for autonomous lawn mower tractors. A 27-HP mower tractor was operated by a skilled farmer on grass fields. To measure tractor travel and operation characteristics, an RTK-GPS antenna with a 6-cm RMS error, an inertia motion sensing unit, a gyro compass, a wheel angle sensor, and a mower on/off sensor were mounted on the mower tractor, and all the data were collected at a 10-Hz rate. All the sensor data were transferred through a software program to show the status immediately on the notebook. Planned path was generated using the program parameter settings, mileage and time calculations, and the travel path was plotted using developed software. Based on the human operation patterns, path planning algorithm was suggested for autonomous mower tractor. Finally path generation was demonstrated in a formatted file and graphic display. After optimizing the path planning, a decrease in distance about 13% and saving of the working time about 30% was achieved. Field test data showed some overlap, especially in the turning areas. Results of the study would be useful to implement an autonomous mower tractor, but further research needs to improve the performance.

• Journal of the Korea Convergence Society
• /
• v.6 no.6
• /
• pp.75-80
• /
• 2015

To train convergence experts ICT infrastructure must be learned IoT use capabilities of things. In this paper, targeted to students that are majoring in computer science, and for the design of the curriculum and the educational model that handles education of operation in general for training IoT-related education for five months to experts of convergence training describe the contents. Course is the basic ability of the process, core competence course, is divided into real-life capability process and on-site training course, was constructed in a total of 10 stages of the process details. Curriculum, it was designed to learn sensing technology, network technology, security, and content production technology. This educational model is utilized for job creation human resource training project of 2015 Ministry of Employment and Labor, it demonstrated the utility to contribute in order to achieve a high completion and the employment rate. Applicable to future university education plans to expand the curriculum, including courses that complement the Java.