• Journal of Magnetics
• /
• 제19권3호
• /
• pp.255-260
• /
• 2014

A portable clip-type pulsimeter equipped with a magnetic sensing Hall device has been developed to raise the accuracy of oriental disease diagnosis and therapy by convergence of magnetism and oriental medicine. To improve accuracy and reliability of conventional pulsimeter due to subjective analysis of the pulse wave and measuring position dependency of the arterial pulse sensor, the fuzzy algorithm was applied to analyze the strong- and weak-pulse wave symptom. Optimal time for electronic acupuncture was calculated using fuzzy rules and interference were drawn from objective data in view of pre-treatment. Moreover, the electrical characteristics of the pain parts that respond to acupuncture point were applied in view of post-treatment to propose the scientific pulse wave algorithm and simulation experiment.

• 대한공간정보학회지
• /
• 제15권4호
• /
• pp.51-58
• /
• 2007

대축척(1:50,000)지도의 산림 정보는 산림지역 보호에 중요한 자료로 이용된다. 그러나 대상지역인 인도 Tamil Nadu의 Eastern Ghats(EG) 지역에는 대축척 지도를 사용할 수 없기 때문에 위성 데이터를 이용한 산림의 변화 탐지를 적용하여 분석하였다. 대상지역의 1990년과 2003년의 산림의 변화에 대한 연구 결과 약 10가지의 산림종류가 관측되었으며 가장 변화가 큰 지역은 상록수와 낙엽수지역에서 관측되었다.

• 대한화학회지
• /
• 제33권4호
• /
• pp.388-398
• /
• 1989

기체 감응막전극을 이용하여 수용액 중의 아질산이온을 연속${\cdot}$자동화법으로 정량하는 방법을 개발하였다. 이 방법에서 최종검출기로 쓴 이온선택성 전극은 관형 PVC막 pH 전극이었다. 장치계의 최적조건에서 구한 아질산이온 표준시료에 대한 전극의 감응기울기는 63.5mV/decade 이었으며, 직선감응 범위는 $2.5{\times}10^{-4}\; M{\sim}7.5 {\times} $10^{-2}$M 이었고, 검출한계는 $8.0{\times} 10^{-5}$M이었다. 이 방법은 다른 정량법보다 산성기체종의 방해를 적게 받을 뿐만 아니라 정량에 필요한 시간도 훨씬 단축할 수 있었다.

• 센서학회지
• /
• 제18권2호
• /
• pp.147-153
• /
• 2009

A thermal flow sensor has been fabricated and characterized, consisting of a center resistive heater surrounded by two upstream and one downstream temperature sensing resistors. The heater and temperature sensing resistors are fabricated from nitrogen-doped(n-type) polycrystalline silicon carbide(poly-SiC) deposited by LPCVD(low pressure chemical vapor deposition) on LPCVD silicon nitride films on a Si substrate. Cavities were etched into the Si substrate from the front side to create suspended silicon nitride membranes carrying the poly-SiC elements. One upstream sensor is located $50{\mu}m$ from the heater and has a sensitivity of $0.73{\Omega}$/sccm with ${\sim}15\;ms$ rise time in a dynamic range of 1000 sccm. N-type poly-SiC has a linear negative temperature coefficient and a TCR(temperature coefficient of resistance) of $-1.24{\times}10^{-3}/^{\circ}C$ from room temperature to $100^{\circ}C$.

• 대한지역사회영양학회지
• /
• 제7권1호
• /
• pp.32-44
• /
• 2002

The objective of this study was to evaluate college students’dietary and health behaviors in relation to their Myers-Briggs Type Indicator (MBTI) personality preferences. Dietary and health behaviors were surveyed for 444 college students who performed the MBTI personality test. Only 6.1% of the subjects regularly had three meals a day, while 27.1% ate breakfast every day. Fifty-six point nine percent of the students took less than 15 minutes to eat a meal and had the habit of eating fast. The number of food groups they ate was, on average, 2.74 and was eaten mainly at dinner. This showed that college students did not eat a large variety of foods. Eighty-two percent of the subjects drank alcoholic beverages, 21.4% smoked, and 69.3% exercised. In addition, 73.9% of them were not satisfied with their body image, but they were not eager to try weight control. There were not many significant differences between Extraversion (E)-Introversion (I), Sensing (S)-iNtuition (N), and Thinking (T)-Feeling (F) in their dietary and heath behaviors, although some gender differences existed. Significantly better dietary and health behaviors were shown in subjects preferring Judging (J) rather than Perceiving (P). There behaviors included eating breakfast, regularly eating three meals a day, smoking less, exercising more and having a lower tendency to night-eating. The personality preference of J-P could be useful index for nutritional education and counseling or behavior modification programs for obese people.

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.305-309
• /
• 2012

In this study, ZnO nanorods and $SnO_2$-CuO heterogeneous oxide were grown on membrane-type gas sensor platforms and the sensing characteristics for carbon monoxide (CO) were studied. Diaphragm-type gas sensor platforms with built-in Pt micro-heaters were made using a conventional bulk micromachining method. ZnO nanorods were grown from ZnO seed layers using the hydrothermal method, and the average diameter and length of the nanorods were adjusted by changing the concentration of the precursor. Thereafter, $SnO_2$-CuO heterogeneous oxide thin films were grown from evaporated Sn and Cu thin films. The average diameters of the ZnO nanorods obtained by changing the concentration of the precursor were between 30 and 200 nm and the ZnO nanorods showed a sensitivity value of 21% at a working temperature of $350^{\circ}C$ and a carbon monoxide concentration of 100 ppm. The $SnO_2$-CuO heterogeneous oxide thin films showed a sensitivity value of 18% at a working temperature of $200^{\circ}C$ and a carbon monoxide concentration of 100 ppm.

• 센서학회지
• /
• 제15권4호
• /
• pp.231-236
• /
• 2006

Single-mode planar waveguide type UV sensor was fabricated using SU-8 and photochromic dye. Polymer waveguide was fabricated $10{\mu}m$ width and $2{\mu}m$ thickness for single-mode operation. The UV sensor had an absorbance with $0.0396{\sim}0.114$ absorbance/mW respectively when the 5 mm sensing area was irradiated with UV for 3 sec. And sensor had a linear properties by sensing area variation. Proposed single-mode sensor had more excellent properties of UV sensitivity than other UV sensors.

• 대한원격탐사학회지
• /
• 제22권5호
• /
• pp.357-366
• /
• 2006

A traditional image analysis or classification method using satellite imagery is mostly based on the spectral information. However, the spatial information is more important according as the resolution is higher and spatial patterns are more complex. In this study, we attempted to compare and analyze the variogram properties of actual high resolution imageries mainly in the urban area. Through the several experiments, we have understood that the variogram is various according to a sensor type, spatial resolution, a location, a feature type, time, season and so on and shows the information related to a feature size. With simple modeling, we confirmed that the unique variogram types were shown unlike the classical variogram in case of small subsets. Based on the grasped variogram characteristics, we made a level index map for determining urban complexity or land-use classification. These results will become more and more important and be widely applied to the various fields of high-resolution imagery such as KOMPSAT-2 and KOMPSAT-3 which is scheduled to be launched.

• 대한원격탐사학회지
• /
• 제24권1호
• /
• pp.57-64
• /
• 2008

In the previous study, the Haar wavelet was used as the sole basis function for the 3D discrete wavelet transform because the number of bands is too small to decompose a remotely sensed image in band direction with other basis functions. However, it is possible to use other basis functions for wavelet decomposition in horizontal and vertical directions because wavelet decomposition is independently performed in each direction. This study aims to classify a high spatial resolution image with the six types of basis function including the Haar function and to compare those results. The other wavelets are more helpful to classify high resolution imagery than the Haar wavelet. In overall accuracy, the Coif4 wavelet has the best result. The improvement of classification accuracy is different depending on the type of class and the type of wavelet. Using the basis functions with long length could be effective for improving accuracy in classification, especially for the classes of small area. This study is expected to be used as fundamental information for selecting optimal basis function according to the data properties in the 3D DWT based image classification.

• 대한원격탐사학회지
• /
• 제37권1호
• /
• pp.97-110
• /
• 2021

Fog can cause large-scale human and economic damages, including traffic systems and agriculture. So, Korea Meteorological Administration is operating about 290 visibility meters to improve the observation level of fog. However, it is still insufficient to detect very localized fog. In this study, high-resolution grid-type visibility data were retrieved from irregularly distributed visibility data across the country. To this end, three objective analysis techniques (Inverse Distance Weighting (IDW), Ordinary Kriging (OK) and Universal Kriging (UK)) were used. To find the best method and parameters, sensitivity test was performed for the effective radius, power parameter and variogram model that affect the level of objective analysis. Also, the effect of data distribution characteristics (level of normality) on the performance level of objective analysis was evaluated. IDW showed a relatively high level of objective analysis in terms of bias, RMSE and correlation, and the performance is inversely proportional to the effective radius and power parameter. However, the two Krigings showed relatively low level of objective analysis, in particular, greatly weakened the variability of the variables, although the level of output was different depending on the variogram model used. As the level of objective analysis is greatly influenced by the distribution characteristics of data, power, and models used, care should be taken when selecting objective analysis techniques and parameters.