• Korean Journal of Remote Sensing
• /
• v.23 no.3
• /
• pp.189-198
• /
• 2007

Introduction of lidar technology have contributed to a wide range of applications in generating quality surface models. Accordingly, because of the importance of terrain surface models in mapping applications, rigorous studies have been performed to extract ground points from a lidar data point cloud. Although most filters have been shown abilities to extract ground points with their parameters tuned, however, most experiments revealed that there are certain limitations in optimizing filter parameters and the correction of remaining misclassified points is not straightforward. In this study, therefore, a method to improve the quality of filtered lidar data is proposed, which exploits neighboring surface properties arising between immediate neighbors. The method comprises a sequence of procedures which can reduce commission and omission errors. Commission errors occurring in low-rise objects are reduced by utilizing morphological operations. On the other hand, omission errors are reduced by adding missing ground points around step edges. Experimental results show that the qualities of filtered data can be improved considerably by the proposed method.

• Korean Journal of Remote Sensing
• /
• v.21 no.5
• /
• pp.425-431
• /
• 2005

This paper describes the method of using IKONOS imagery in the development of agriculture-related data inventories. Temporally different three images of panchromatic (1m resolution) and multi-spectral bands (4m resolution) were used to obtain the distribution and characteristics of rice, pear, grape, red pepper, garlic, and reservoir surface area with the field surveys. The result of this study suggests the utility of KOMPSAT-II, which increases the use of the crop and water resources data in rural areas by accumulating temporal data inventories.

• Korean Journal of Remote Sensing
• /
• v.4 no.1
• /
• pp.49-60
• /
• 1988

Principal Component Analysis (PCA) was applied for regional geological mapping to a multivariate data set of the Landsat TM data in the heavily vegetated and topographically rugged Chungju area. The multivariate data set selection was made by statistical analysis based on the magnitude of regression of squares in multiple regression, and it includes R1/2/R3/4, R2/3, R5/7/R4/3, R1/2, R3/4. R4/3. AND R4/5. As a result of application of PCA, some of later principal components (in this study PC 3 and PC 5) are geologically more significant than earlier major components, PC 1 and PC 2 herein. The earlier two major components which comprise 96% of the total information of the data set, mainly represent reflectance of vegetation and topographic effects, while though the rest represent 3% of the total information which statistically indicates the information unstable, geological significance of PC3 and PC5 in the study implies that application of the technique in more favorable areas should lead to much better results.

• Korean Journal of Remote Sensing
• /
• v.23 no.1
• /
• pp.43-53
• /
• 2007

In this study, two standard specifications such as GML (Geography Markup Language) from OGC (Open Geo-spatial Consortium, Inc.) and X3D (extensible 3D) from Web3D consortium were dealt with for a web-based 3D urban application without using commercialized tools. In the first step of this study, DEM (Digital Elevation Model) and 3D GIS data sets were converted to GML structure with attribute schema. Then, these GML elements were projected onto a common coordinate system, and they were converted to the X3D format for visualization on web browser. In this work, a 3D urban data model, as a simple framework model, is extended to a framework model having further detailed information, depending upon application levels. Conclusively, this study is to demonstrate for practical uses of GML and X3D in 3D urban application and this approach can be applied to other application domains regarding system integrators and data sharing communities on distributed environments.

• Korean Journal of Remote Sensing
• /
• v.19 no.5
• /
• pp.341-349
• /
• 2003

The so-called B-method, a simplified surface energy budget, permits calculation of daily actual evapotranspiration (ET) using remotely sensed data, such as NOAA-AVHRR. Even if the use of satellite data allows estimation of the albedo and surface temperature, this model requires meteorological data measured at ground-level to obtain the other inputs. In addition, a difficulty may be occurred by the difference of temporal scales between the net radiation in daily scale and instantaneous measurement at midday of the surface and air temperatures because the data covered whole day are necessary to obtain accumulated daily net radiation. In order to solve these problems, this study attempted a modification of B-method through an extension of hourly ET value calculated using a complete instantaneous inputs. The estimation of the daily apparent ET from newly proposed system showed a root mean square error of 0.26 mm/day as compared the output obtained from the classical model. It is evident that this may offer more rapid estimation and reduced data volume.

• Korean Journal of Remote Sensing
• /
• v.16 no.2
• /
• pp.145-156
• /
• 2000

Clustering is the process of partitioning a data set into meaningful clusters. As the data to process increase, a laster algorithm is required than ever. In this paper, we propose a clustering algorithm to partition a multispectral remotely sensed image data set into several clusters using a hash search algorithm. The processing time of our algorithm is compared with that of clusters algorithm using other speed-up concepts. The experiment results are compared with respect to the number of bands, the number of clusters and the size of data. It is also showed that the processing time of our algorithm is shorter than that of cluster algorithms using other speed-up concepts when the size of data is relatively large.

• Advances in aircraft and spacecraft science
• /
• v.9 no.1
• /
• pp.1-15
• /
• 2022

This paper presents calibration of flush air data sensing systems during ascent period of a satellite launch vehicle. Aerodynamic results are numerically computed by solving three-dimensional time dependent compressible Euler equations over a payload shroud of a satellite launch vehicle. The flush air data system consists of four pressure ports flushed on a blunt-cone section of the payload shroud and connected to on board differential pressure transducers. The inverse algorithm uses calibration charts which are based on computed and measured data. A controlled random search method coupled with neural network technique is employed to estimate pitch and yaw angles from measured transient differential pressure history. The algorithm predicts the flow direction stepwise with the function of flight Mach numbers and can be termed as an online method. Flow direction of the launch vehicle is compared with the reconstructed trajectory data. The estimated values of the flow direction are in good agreement with them.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.551-554
• /
• 2006

House management is very important in water resource protection in order to provide sustainable drinking water for about four millions population in northern Taiwan. House management can be a simple job that can be done without any ingredient of remote sensing or geographic information systems. Remote sensing and GIS integration for house management can provide more efficient management prescription when land use enforcement, soil and water conservation, sewage management, garbage collection, and reforestation have to be managed simultaneously. The objective of this paper was to integrate remote sensing and GIS to manage houses in a water resource protection district. More than four thousand houses have been surveyed and created as a house data base. Site map of every single house and very detail information consisting of address, ownership, date of creation, building materials, acreages floor by floor, parcel information, and types of house condition. Some houses have their photos in different directions. One house has its own card consists these information and these attributes were created into a house data base. Site maps of all houses were created with the same coordinates system as parcel maps, topographic maps, sewage maps, and city planning maps. Visual Basic.NET, Visual C#.NET have been implemented to develop computer programs for house information inquiry and maps overlay among house maps and other GIS map layers. Remote sensing techniques have been implemented to generate the background information of a single house in the past 15 years. Digital orthophoto maps at a scale of 1:5000 overlay with house site maps are very useful in determination of a house was there or not for a given year. Satellite images if their resolutions good enough are also very useful in this type of daily government operations. The developed house management systems can work with commercial GIS software such as ArcView and ArcPad. Remote sensing provided image information of a single house whether it was there or not in a given year. GIS provided overlay and inquiry functions to automatically extract attributes of a given house by ownership, address, and so on when certain house management prescriptions have to be made by government agency. File format is the key component that makes remote sensing and GIS integration smoothly. The developed house management systems are user friendly and can be modified to meet needs encountered in a single task of a government technician.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.962-964
• /
• 2003

In 2002 Thailand was faced with severe flooding in the North, Northeast and Central parts of the country caused by heavy rainfall of the monsoonal depression which brought about significant damages. According to the report by the Ministry of Interior and the Ministry of Agricultural and Co-operatives, the total damages were estimated to be about 6 billion bath. More than 850,000 farmers and 10 million livestock were effected. An area of 1,450,000 ha of farmland in 59 Provinces were put under water for a prolonged period. Satellite imageries were employed for mapping and monitoring the flood-inundated areas, flood damage assessment, flood hazard zoning and post-flood survey of river configuration and protection works. By integrating satellite data with other updated spatial and non-spatial data, likely flood zones can be predicted beforehand. Some examples of satellite data application to flood dis aster mitigation in Thailand during 2002 using mostly Radarsat-1 data and Landsat-7 data were illustrated and discussed in the paper. The results showed that satellite data can clearly identify and give information on the status, flooding period, boundary and damage of flooding. For comprehensive flood mitigation planning, other geo-informatic data, such as the elevation of topography, hydrological data need to be integrated. Ground truth data of the watershed area, including the water level, velocity, drainage pattern and direction were also useful for flood forecasting in the future.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.363-369
• /
• 2017

Phase-change random access memory (PRAM) has been emerged as a potential memory due to its excellent scalability, non-volatility, and random accessibility. But, as the cell current is reducing due to cell size scaling, the read-sensing window margin is also decreasing due to increased variation of cell performance distribution, resulting in a substantial loss of yield. To cope with this problem, a novel adaptive read-sensing reference current generation scheme is proposed, whose trimming range and resolution are adaptively controlled depending on process conditions. Performance evaluation in a 58-nm CMOS process indicated that the proposed read-sensing reference current scheme allowed the integral nonlinearity (INL) to be improved from 10.3 LSB to 2.14 LSB (79% reduction), and the differential nonlinearity (DNL) from 2.29 LSB to 0.94 LSB (59% reduction).