• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.12
• /
• pp.635-640
• /
• 2016

It is important factors for a production system to get a profitable result in quality and reliability process. For this reason, there's are various type of research papers in a certain type of data acquisition and application to reliability and quality of the level of M2M devices. In general, a classification problem of slightly different signal such as sensing data is difficult to do with classical statistical methods. There's required real-time and instantaneous calculation properties in machine process. Especially a type of injection molding machine which has a property to be decided in accordance with short-term cycle process needs a solution that can be done a certain type of decision like as good or bad quality immediately. This paper presents a simple application of Kalman Filtering by single sensing data to injection molding process in order to get a correct answer from the real time sensing data.

• Spatial Information Research
• /
• v.12 no.4 s.31
• /
• pp.351-370
• /
• 2004

At present, environmental monitoring of linear infrastructure is based mainly on field sampling. The 'integrated mapping' approach has received only limited attention from field scientists. The increased environmental regulation of corridor targets has required remote sensing research to develop a sensor or technique for targets ranging from 15 m to 100 m in swath width. In an attempt to identify the optimal remote sensing system for linear targets, an overview is provided of the application requirements and the technology currently available. The relative limitation of traditional remote sensing systems in such a linear application is briefly discussed. It is noted that airborne video could provide, in a cost-effective manner, information required for a very narrow and long strip target utilising the narrow view angle and dynamic stereo coverage. The value of this paper is warranted in proposing a new concept of video infrastructure monitoring as a future research direction in the recognition of sensor characteristics and limitations.

• Korean Journal of Remote Sensing
• /
• v.16 no.4
• /
• pp.339-345
• /
• 2000

KOMPSAT-1 was launched on 21 December, 1999 and the main mission of the satellite is the cartography to provide the imagery from a remote earth view for the production of maps of Korean territory. For this purpose, the satellite has capability to tilt the spacecraft utmost $\pm$45 degrees to acquire stereo satellite imagery in different paths. This study aims to estimate the three dimensional positioning accuracy of stereo satellite imagery from EOC(electro-optical camera), a payload of KOMPSAT-1 satellite. For this purpose, the ground control points and check points were obtained by GPS surveying. The sensor modeling and the adjustment was performed by PCI software installed in KARI (Korea Aerospace Research Institute), which contained mathematical analysis module for KOMPSAT-1 EOC. The study areas were Taejon and Nonsan, placed in the middle part of Korea. As a result of this study, we found that the RMSE(root mean square error) value of three dimensional positioning KOMPST-1 stereo imagery can be less than 1 pixel (6.6 m) if we can use about 10 GCPs(ground control points). Then, a standarrd of FGDC (Federal Geographic Data Committee) of USA was applied to the result to estimate the three dimensional positioning accuracy of KOMPSAT-1 stereo imagery.

• Korean Journal of Remote Sensing
• /
• v.39 no.1
• /
• pp.65-76
• /
• 2023

The Gamma Portable Radar Interferometer (GPRI) is a ground-based real aperture radar (RAR) that can acquire images with high spatial and temporal resolution. The GPRI ground-based radar used in this study composes three antennas with a Ku-band frequency of 17.1-17.3 GHz (1.73-1.75 cm of wavelength). It can measure displacement over time with millimeter-scale precision. It is also possible to adjust the observation mode by arranging the transmitting and receiving antennas for various applications: i) obtaining differential interferograms through the application of interferometric techniques, ii) generation of digital elevation models and iii) acquisition of full polarimetric data. We introduced the hardware configuration of the GPRI ground-based radar, image acquisition, and characteristics of the collected radar images. The interferometric phase difference has been evaluated to apply the multi-temporal interferometric SAR application (MT-InSAR) using the first observation campaigns at Pusan National University in Geumjeong-gu, Busan.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.620-624
• /
• 2007

Recently, Gonzalez-Audicana et al. proposed the substitute wavelet intensity (SWI) method which provided a solution based on the intensity-hue-saturation (IHS) method for the fusing of panchromatic (PAN) and multispectral (MS) images. Although the spectral quality of the fused MS images is enhanced, this method is not efficient enough to quickly merge massive volumes of data from satellite. To overcome this problem, we introduce a new SWI method based on a fast IHS transform to implement efficiently as an alternative procedure. In addition, we show that the method is well applicable for fusing IKONOS PAN with MS images.

• Korean Journal of Remote Sensing
• /
• v.33 no.1
• /
• pp.47-60
• /
• 2017

The permafrost active layer plays an important role in permafrost dynamics. Ecological patterns, processes, and water and ice contents in the active layer are spatially and temporally complex depending on landscape heterogeneity and local-scale variations in hydrological processes. Although there has been emerging interest in the application of optical remote sensing techniques to permafrost environments, optical sensors are significantly limited in accessing information on near surface geo-cryological conditions. The primary objective of this study was to investigate capability of L-band SAR data for monitoring spatio-temporal variability of permafrost ecosystems and underlying soil conditions. This study exploits information from different polarimetric SAR observables in relation to permafrost environmental conditions. Experimental results show that each polarimetric radar observable conveys different information on permafrost environments. In the case of the dual-pol mode, the radar observables consist of two backscattering powers and one correlation coefficient between polarimetric channels. Among them, the dual-pol scattering powers are highly sensitive to freeze/thaw transition and can discriminate grasslands or ponds in thermokarst area from other permafrost ecosystems. However, it is difficult to identify the ground conditions with dual-pol observables. Additional backscattering powers and correlation coefficients obtained from quad-pol mode help understanding seasonal variations ofradar scattering and assessing geo-cryological information on soil layers. In particular, co-pol coherences atHV-basis and circular-basis were found to be very usefultools for mapping and monitoring near surface soil properties.

• Current Optics and Photonics
• /
• v.6 no.3
• /
• pp.252-259
• /
• 2022

In this paper, a dual-function dynamically tunable metamaterial absorber is proposed. At frequency points of 1.545 THz and 3.21 THz, two resonance peaks with absorption amplitude of 93.8% (peak I) and 99.4% (peak II) can be achieved. By regulating the conductivity of photosensitive silicon with a pump laser, the resonance frequency of peak I switches to 1.525 THz, and that of peak II switches to 2.79 THz. By adjusting the incident polarization angle by rotating the device, absorption amplitude tuning is obtained. By introducing two degrees of regulation freedom, the absorption amplitude modulation and resonant frequency switching are simultaneously realized. More importantly, dynamic and continuous adjustment of the absorption amplitude is obtained at a fixed resonant frequency, and the modulation depth reaches 100% for both peaks. In addition, the sensing property of the proposed MMA was studied while it was used as a refractive index sensor. Compared with other results reported, our device not only has a dual-function tunable characteristic and the highest modulation depth, but also simultaneously possesses fine sensing performance.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1145-1148
• /
• 2005

The sensor network that may be deemed to fall in the field of ubiquitous computing performs the basic function of transmitting sensing data through the autonomous sensing and the Ad hoc network. In order to collect and treat various sensing data at the time of application and manage extremely limited system resources, the sensor network requires the embedded operating system that uses low power, a small cord size and the least hardware resources. In this paper, The operating system having a new structure for constructing the IEEE 802. 15.4 MAC and Zigbee sensor network is suggested and can be formed by reviewing the characteristics and the core structural requirements of the operating system for the sensor network based on operating systems, which have been formed under existing similar conditions, and applying such features and core structural requirements to the design of the operating system for achieving the features and the requirements.

• Journal of Sensor Science and Technology
• /
• v.27 no.1
• /
• pp.13-20
• /
• 2018

Gas sensors based on metal oxide semiconductors are used in numerous applications including monitoring indoor air quality and detecting harmful substances like volatile organic compounds. Nanostructures, for example, nanoparticles, nanotubes, nanodomes, and nanofibers have been widely utilized to improve gas sensing properties of metal oxide semiconductors, and this increases the effective surface area, resulting in participation of more target gas molecules in the surface reaction. In the recent times, 1-dimensional (1D) metal oxide nanostructures fabricated using anodic oxidation have attracted great attention due to their high surface-to-volume ratio with large-area uniformity, reproducibility, and capability of synthesis under ambient air and pressure, leading to cost-effectiveness. Here, we provide a brief overview of 1D metal oxide nanostructures fabricated by anodic oxidation and their gas sensing properties. In addition, recent progress on thin film-based anodic oxidation for application in gas sensors is introduced.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.241-250
• /
• 2019

The current U.S. remote sensing act was made in 1992 and has been criticized for being outdated and inappropriate in view of the modern technological development. In order to enhance the American competitiveness and leadership in the world, President Trump announced Space Policy Directive (SPD) - 2 on May 24, which is designed to modernize the regulations related to commercial space activities including private remote sensing system operations. It should be noted that the regulatory reform efforts are made within broader terms of the National Security Strategy on Dec. 17, 2017, pursuing the enhancement of national security and economic prosperity as well. A legislative support in Congress has also been added to the Administration's efforts. The proposed regulatory reform on the licensing of commercial remote sensing system operations outlines the features of lessening administrative burden on applicants by simplifying the overall application process and of limiting the operations only when there is an impact upon the national security with clear and convincing evidence. But, due to a different regulatory system of each country, such a movement to expand an individual's freedom to explore and utilize outer space may result in an international dispute or a violation of international obligations, so there should be a merit in paying attention to the U.S. commercial remote sensing regulatory reform, and it is desirable to establish international norms as flexible and appropriate to the level of space technology and space industry.