• Korean Journal of Remote Sensing
• /
• v.37 no.4
• /
• pp.687-698
• /
• 2021

We present quantitative estimations of changes in the areal extent of coral reef habitats at Weno Island, Micronesia, using high-spatial-resolution remote sensing images and field observations. Coral reef habitat maps were generated from Kompsat-2 satellite images for September 2008 and September 2010, yielding classifications with 78.6% and 72.4% accuracy, respectively, which is a relatively high level of agreement. The difference between the number of pixels occupied by each seabed type was calculated, revealing that the areal extent of living corals decreased by 8.2 percentage points between 2008 and 2010. This result is consistent with a comparison of the seabed types determined by field observations. This study can be used as a basis for remediation planning to diminish the impact of changes in coral reefs.

• Journal of KIISE
• /
• v.43 no.7
• /
• pp.763-772
• /
• 2016

With the spread of smartphones containing multiple on-board sensors, the market for context aware applications have grown. However, due to the limited power capacity of a smartphone, users feel discontented QoS. Additionally, context aware applications require the utilization of many forms of context and sensing information. If context transition has occurred, types of needed sensors must be changed and each sensor modules need to turn on/off. In addition, excessive sensing has been found when the context decision is ambiguous. In this paper, we focus on power consumption associated with the context transition that occurs during indoor/outdoor detection, modeling the activities of the sensor associated with these contexts. And we suggest a freezing algorithm that reduces power consumption in context transition. We experiment with a commercial application that service is indoor/outdoor location tracking, measure power consumption in context transition with and without the utilization of the proposed method. We find that proposed method reduces power consumption about 20% during context transition.

• Korean Journal of Remote Sensing
• /
• v.15 no.4
• /
• pp.349-356
• /
• 1999

Korea Multi-Purpose Satellite-l (KOMPSAT-l) has been developed by the Korea Aerospace Research Institute (KARI) with the aid of TRW and will be launched on the December 21, 1999 at the Vandenberg Air Base in CA, U.S. Now, the satellite application group in KARI is preparing for the service with the KOMPSAT-l satellite data. For the purpose of supplying good service to the users, data application planning has to be established before launching satellite. To use satellite data effectively, KARI makes a plan for data policy, data price, mission planning, and commercializing strategy. This study was carried out with the purpose of effective use of satellite data. For this purpose, KARI, first, made 60 user groups to use KOMPSAT-l data for public welfare and research sectors. These user groups include government, public corporations, institutes, and universities. KARI will offer the service to users through online using Internet. Secondly, KARI made a policy for the priority of KOMPSAT-l missions. These are classified by the mission priority, payloads, and operational states etc. Thirdly, KARI will make data policy and data price of KOMPSAT-l based on the basic master plan. Especially, data price will be determined at the KOMPSAT-l committee including Ministry of Science and Technology (MOST). KARI is also trying to commercialize the data with the domestic and foreign companies to expand the use of KOMPSAT-l data in the industries sector. Afterward in this study, KARI will continue the improvement for the effective distribution of KOMPSAT-l data for all users.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1421-1423
• /
• 2003

Ultra Wideband is a new technology from commercial or civilian application viewpoint. It uses already allocated radio spectrum without causing significant interference to other users. It uses very low power, which is below the thermal noise of the receiver and is inherently difficult to detect by un-intentional users. Since, FCC approved the regulation for the commercial use of UWB in February 2002, the development of UWB technology is drastically gaining momentum. However, the technology itself is not new. It has already been used in military applications. UWB has three basic areas of applications, which are communication, positioning and imaging (UWB Microwave). The main commercial application will be for communication since it has very high data transfer rate for short distance. It can also be used for both indoor and outdoor 3-D positioning. Another important application is imaging like microwave remote sensing. An UWB sensor can pass through doors and walls and hence detect the objects inside the room. In this paper, we will introduce about UWB technology along with it’s various possible applications. We will also present some models to generate UWB signal and it’s analysis using signal-processing tools.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.6
• /
• pp.810-817
• /
• 2014

An on-chip current sensor with fast response time for the peak-current-mode buck regulator is proposed. The initial operating points of the peak current sensor are determined in advance by the valley current level, which is sensed by a valley current sensor. As a result, the proposed current sensor achieves a fast response time of less than 20 ns, and a sensing accuracy of over 90%. Applying the proposed current sensor, the peak-current-mode buck regulator for the mobile application is realized with an operating frequency of 2 MHz, an output voltage of 0.8 V, a maximum load current of 500 mA, and a peak efficiency of over 83%.

• Journal of electromagnetic engineering and science
• /
• v.17 no.1
• /
• pp.34-38
• /
• 2017

In this paper, we propose an active tunable bandpass filter (BPF) for efficient spectrum sensing in the TV White Space (TVWS) band. By designing a narrow bandwidth, it is possible to improve the sensing probability. The basic circuit configuration involves switching the PIN diode compromising capacitor bank to change the capacitance of the LC resonant circuit. To cover the whole TVWS band effectively, we add a varactor diode, and the bandwidth is set to 25-MHz. We improve the insertion loss by using the active capacitance circuit. The tunable BPF in the TVWS band with a 20-MHz interval is designed to have 11 channels with a bandwidth of 25 MHz and a low insertion loss of 1.7-2.0 dB.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.350-351
• /
• 2006

Thick film mechanical sensors can be categorized into four main areas piezoresistive, piezoelectric, capacitive and mechanic tube. In this areas, the thick film strain gage is the earliest example of a primary sensing element based on the substrates. The latest thick film sensor is used various pastes that have been specifically developed for pressure sensor application. Some elastic materials exhibit a change in bulk resistivity when they are subjected to displacement by an applied pressure. This property is referred to as piezoresistivity and is a major factor influencing the sensitivity of a piezoresistive strain gage. The effect of thick film resistors was first noticed in the early 1970, as described by Holmes in his paper in 1973.

• Journal of the Korean Magnetics Society
• /
• v.26 no.2
• /
• pp.62-66
• /
• 2016

We designed a model composed a ring type magnet, a yoke, and a sensing coil buried in a projectile for calculating the muzzle velocity based on the voltage induced from sensing coil by simulation. The muzzle velocity was calculated from the master curve obtained through the voltage induced from sensing coil by simulation. The induced voltage increased with increasing the diameter of sensing coil. The projectile's velocity was proportional to the induced voltage when the sensing coil was buried in projectile. The projectile will be surely exploded at the target region by inputting the information of muzzle velocity variation corrected the diameter effect of induced voltage of sensing coil.

• Korean Journal of Remote Sensing
• /
• v.15 no.3
• /
• pp.277-288
• /
• 1999

The aim of this review is to provide perspectives on the application of remote sensing techniques for observation of marine environmental changes on various spatio-temporal scales. Currently available remote sensing technologies are reviewed and future direction is suggested. For better utilization of remote sensing, a comprehensive plan should be developed by a demand-side and problem-solving approach. Marine environmental changes should be observed on proper spatio-temporal scales where the processes occur. For appropriate observation and monitoring of various environmental changes in coastal regions, more sensors must be utilized. Platforms other than satellites should also be utilized to expand the spatio-temporal scales of observation. Calibration/validation activities, required for accurate interpretation of remotely sensed data, could utilize buoys and ship-of-opportunity sensors. It is desirable that such systems by developed as a part of an integrated monitoring network.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_3
• /
• pp.2001-2010
• /
• 2021

The purpose of this study is to efficiently improve orthorectification of KOMPSAT images. As the development of domestic and abroad earth observation satellites accelerates, the number and amounts of satellite images acquired are rapidly increasing. Accordingly, various studies are being conducted to improve orthorectification for the acquired image more quickly and efficiently. This study focused on enhancing processing efficiency through algorithm improvement, except for improving hardware computing capabilities such as GPU. Accordingly, the algorithm was improved with the LUT-based RFM method, and compared and analyzed in terms of accuracy and time-efficiency that vary depending on offset settings.