• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.441-447
• /
• 2022

This study describes a novel method for detecting and measuring partial discharge (PD) on an electrical facility such as an insulated power cable or switchgear using fiber optic sensing technology, and a distributed acoustic sensing (DAS) system. This method has distinct advantages over traditional PD sensing techniques based on an electrical method, including immunity to electromagnetic interference (EMI), long range detection, simultaneous detection for multiple points, and exact location. In this study, we present a DAS system for PD detection with performance evaluation and experimental results in a simulated environment. The results show that the system can be applied to PD detection.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.3
• /
• pp.75-83
• /
• 2011

Cognitive radio (CR) technology is to maximize the spectrum utilization by allocating the unused spectrums to the unlicensed users. This technology enables the sharing of channels among secondary (unlicensed) and primary (licensed) users on a non-interference basis after sensing the vacant channel and as a result, it is possible to harness wireless frequency more efficiently. To enhance the accuracy of sensing, RDSS was suggested. It is a fusion mechanism based on the reputation of sensing nodes and WSPRT (weighted sequential probability ratio test). However, in RDSS, the execution number of WSPRT could increase according to the order of inputted sensing values, and the fast defense against the forged values is difficult. In this paper, we propose a transaction signing-based authentication scheme for secure distributed spectrum sensing to response the forged values. The validity of proposed scheme is provided by BAN logic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7B
• /
• pp.538-549
• /
• 2008

Recently IEEE 802.22 WG has considered Cognitive Radio (CR) technology to overcome shortage of communication channels. For using CR technology, accurate and rapid sensing method selection is extremely important. According to the channel sensing method, it is of the utmost importance because it can affect the incumbent system protection. So, optimum selection of channel sensing method is very important. IEEE 802.22 gives the solution, name of fine sensing, but the solution can not adapt to various networks. So in this paper we propose Policy-based Channel Sensing Architecture and Algorithms for Cognitive Radio Networks. The proposed channel sensing architecture and algorithms can reduce both primary system detection time and quiet time in our simulation. Among the proposed sensing algorithm, channel division round robin sensing reduce average detection time up to 70% compare to fine sensing method in IEEE 802.22.

• Proceedings of the KSRS Conference
• /
• 2008.10a
• /
• pp.65-65
• /
• 2008

See Full Text

• Journal of Industrial Technology
• /
• v.27 no.B
• /
• pp.103-107
• /
• 2007

In this paper, the light screen sensing system is introduced and testified to detect small grains such as seeds or electronic chips of uneven sized. Two modules composed of transmitter-receiver sensor array and microprocessor-based sensor signal processing system are developed to realize the proposed system. Experimental results showed that the sensing signal was relatively clear and its counting performance was very stable.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.395-407
• /
• 2021

The effect of the specifications of a silicon-on-insulator vertical slot optical waveguide on the sensitivity of homogeneous and surface sensing configurations for TE and TM polarization, respectively, was systematically analyzed using numerical software. The specifications were optimized based on the confinement factor and transmission power of the TE-guided mode distributed in the slot. The waveguide sensitivities of homogeneous and surface sensing were calculated according to the specifications of the optimized slot optical waveguide.

• Smart Structures and Systems
• /
• v.18 no.6
• /
• pp.1217-1231
• /
• 2016

In this research, a slotted patch antenna sensor is designed for wireless strain and crack sensing. An off-the-shelf RFID (radiofrequency identification) chip is adopted in the antenna sensor design for signal modulation. The operation power of the RFID chip is captured from wireless reader interrogation signal, so the sensor operation is completely battery-free (passive) and wireless. For strain and crack sensing of a structure, the antenna sensor is bonded on the structure surface like a regular strain gage. Since the antenna resonance frequency is directly related with antenna dimension, which deforms when strain occurs on the structural surface, the deformation/strain can be correlated with antenna resonance frequency shift measured by an RFID reader. The slotted patch antenna sensor performance is first evaluated through mechanics-electromagnetics coupled simulation. Extensive experiments are then conducted to validate the antenna sensor performance, including tensile and compressive strain sensing, wireless interrogation range, and fatigue crack sensing.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.52-57
• /
• 2006

In this paper, a new 'impedance sensing' method is described. This method overcomes the shortcomings of the impedance sensing method. According to the new method, sensing voltage pulse is applied to the idle phase in the minimum inductance region and the beginning of the increasing inductance region to detect rotor position. The negative torque produced by the sensing voltage pulse can be neglected in the minimum inductance region and the efficiency of SRM is improved. In the minimum inductance region the back electromotive force (EMF) can be neglected. And in the increasing inductance region the EMF opposes the rise of current in the phase, so the position estimation scheme is reliable. Therefore the new 'impedance sensing' method is sufficiently precise even under the high back EMF effect. The adjustment of turn-on angle and turn-off angle is also easy to be realized. The technique is very useful in applications where cost or size is primary concerns, such as electric bicycle drives. Experimental results are presented to verify the proposed method.

• The Journal of the Korea Contents Association
• /
• v.9 no.3
• /
• pp.39-48
• /
• 2009

The Spectrum Sensing technology is the core technology of the Cognitive Radio (CR) system that is one of the future wireless communication technologies. This is the technology that temporarily allocates the frequency bandwidth by scanning surrounding wireless environments to keep licensed terminals and search the unused frequency bandwidth. In this paper, we implement the efficient Spectrum Sensing methods based on CR technology in an embedded board. The DVB-H signal with the 6MHz bandwidth is used as the RF input signal. And we confirm the Spectrum Sensing result using Modified Periodogram Method, Welch's Method, SCF Method. And also, We examine the execution speed of each of detailed functions and the performance of Spectrum Sensing methods on TI320C6416 DSP board inserted in an embedded board.

• Journal of Sensor Science and Technology
• /
• v.32 no.2
• /
• pp.75-81
• /
• 2023

The significance of gas sensors has been emphasized in various industries and applications, owing to the growing significance of environmental, social, and governance (ESG) management in corporate operations. In particular, the monitoring of hazardous gas leakages and detection of fugitive emissions have recently garnered significant attention across several industrial sectors. As industrial workplaces evolve to ensure the safety of their working environments and reduce greenhouse gas emissions, the demand for high-performance gas sensors in industrial sectors dealing with toxic substances is on the rise. However, conventional gas-sensing systems have limitations in monitoring fugitive gas leakages at both critical and subcritical concentrations in complex environments. To overcome these difficulties, recent studies in the field of gas sensors have employed techniques such as mobile robotic olfaction, remote optical sensing, chemical grid sensing, and remote acoustic sensing. This review highlights the significant progress made in various technologies that have enabled accurate and real-time mapping of gas distribution and localization of hazardous gas sources. These recent advancements in gas-sensing technology have shed light on the future role of gas-detection systems in industrial safety.