• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.319-327
• /
• 2010

We examine the ionospheric F2-layer electron density variation by solar activity in middle latitude by using foF2 observed at the Kokubunji ionosonde station in Japan for the period from 1997 to 2008. The semi-annual variation of foF2 shows obviously in high solar activity (2000-2002) than low solar activity (2006-2008). It seems that variation of geomagnetic activity by solar activity influences on the semi-annual variation of the ionospheric F2-layer electron density. According to the Lomb-Scargle periodogram analysis of foF2 and Ap index, interplanetary magnetic field (IMF) Bs (IMF Bz <0) component, solar wind speed, solar wind number density and flow pressure which influence the geomagnetic activity, we examine how the geomagnetic activity affects the ionospheric F2-layer electron density variation. We find that the semi-annual variation of daily foF2, Ap index and IMF Bs appear clearly during the high solar activity. It suggests that the semi-annual variation of geomagnetic activity, caused by Russell-McPherron effect, contributes greatly to the ionospheric F2-layer semi-annual electron density variation, except dynamical effects in the thermosphere.

• Journal of Ecology and Environment
• /
• 제31권3호
• /
• pp.207-211
• /
• 2008

We investigated the leaf demography of a temperate woody liana, Akebia trifoliata, in a temperate forest in Japan, Akebia is semi-evergreen: some leaves are shed before winter, while others remain through the winter. Previous studies of semi-evergreen species found that variation in leaf life span was caused by variation in the timing of leaf emergence, Leaves that appeared just before winter over-wintered, while leaves appearing earlier were shed, However, it is unclear whether leaves of the same cohort (i.e., leaves that appear at the same time within a single site) show variation in life span under the effect of strong seasonality. To separate variation in life span among the leaves in each cohort from variation among cohorts, we propose a new method - the single leaf diagram, which shows the emergence and death of each leaf. Using single leaf diagrams, our study revealed that Akebia leaves within a cohort showed substantial variation in life span, with some over-wintering and some not. In addition, leaves on small ramets in the understory showed great variation in life span, while leaves on large ramets, which typically reach higher positions in the forest canopy, have shorter lives, As a result, small ramets were semi-evergreen, whereas large ramets were deciduous, The longer lives of leaves on small ramets can be interpreted as a shade-adaptive strategy in understory plants.

• 대한수학회논문집
• /
• 제10권3호
• /
• pp.643-652
• /
• 1995

We use a semi-variational method to obtain necessary condition for a linear functional L to attain its extrema at certain elementary products. This is applied to obtain an answer to the long-standing question of determining explicit extreme points of the normalised Spirallike functions of order $\alpha$.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1996년도 추계학술대회논문집; 한국과학기술회관, 8 Nov. 1996
• /
• pp.338-344
• /
• 1996

In this paper, a semi-active suspension adapting to road variation which also considers the frequency snesitivity of human is proposed. First, a road adapting controller composed of system identification and LQG control is designed. Using the extended least squares method, the road property is estimated by system identification as it varies, and the LQG controller considering the estimated road property and the frequency sensitivity of human is designed. Next, the semi-active suspension is made, which tracks the performance of the active suspension with the road adapting controller. Through numerical simulation, the performance of the proposed semi-active suspension is compared with that of a non-adaptive semi-active suspension with frequency-shaped performance index. As a result, we see that the road adapting semi-active suspension has better performance.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.667-670
• /
• 2002

Uniform metal-droplet deposition using laser is analyzed. Using the variation principle and modeling the semi-solid phase as a non-Netwonian slurry, this model can greatly save the computational expenses that conventional numerical procedures have suffered from. The simulation results revealed that the developed model could reasonably describe the collision behavior of molten metal with solid surface. Simulations were made with variation of the falling distance and time.

• 동력기계공학회지
• /
• 제6권2호
• /
• pp.82-87
• /
• 2002

For the dynamic behavior evaluation of a semi-active vibration control system, it is very important to use an accurate mathematical model for the hydraulic damper applied to the control system. In this study, a mathematical model for a symmetric type hydraulic damper was suggested. In this model, the effects of gas volume and oil temperature variation on the bulk modulus of oil were considered. The dynamic behavior of the damper was investigated by experiments and simulations. It was confirmed that the pressure variation, damping force, and mean pressure variation could be estimated with comparatively good precision by the suggested mathematical model. Moreover, it was shown that excessive pressure rise can be generated by the oil expansion due to the heat energy transformed from the exciting energy of the damper for a short period of the damper operation.

• 소성∙가공
• /
• 제6권4호
• /
• pp.338-345
• /
• 1997

The behaviour of alloys in the semi-solid state strongly depends on the imposed stress stage and on the morphology of the phase which can vary from dendritic to globular. To optimal net shape forging of semi-solid materials, it is important to investigate for material behaviour for variation of strain rate. Therefore, to investigate the effect of compression speed on deformation of aluminum alloy with globular microstructure, the compression test for semi-solid aluminum alloy with controlled solid fraction is perform by material test system which is attracted with furance. The behavior of semi-solid aluminum alloy were discussed for the various solid fraction and die speed. The material constants in stress-strain were are also proposed.

• 소성∙가공
• /
• 제14권2호
• /
• pp.147-152
• /
• 2005

The objective of this study is to develop an optimal drawing die for the clad wire drawing process. Cu-clad wire, which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used in the field of the telecommunications, electric-electronic and military technology industries. It is important to obtain uniformly coated rate when producing clad wires. Drawing process of clad wire will be influenced on damage and coated rate of core and sleeve for process variables such as semi-die angle and reduction in area. Therefore, in this study, the finite-element result obtained in this study was analyzed to the effect of the various forming parameters, which included the semi-die angle and reduction in area. The coated rate will be predicted with observation of copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.27-30
• /
• 2004

Clad wire , which has the advantages of the high strength of a steel core and the electro-conductivity, corrosion resistance of a copper layer, is widely being used the telecommunications, electric-electronic and military technology industries, among others. It is important to obtain uniform coated rate when producing clad wires. Clad wire drawing process can be influenced on damage and coated rate of core and sleeve by process variables as semi-die angle and reduction in area. Therefore, in this study, the finite-element results established in previous study is used to analyze the effect of the various forming parameters, which included the semi-die angle, reduction in area etc. The coated rate will be predicted with observation copper coated rate variation according to total reduction in area and the optimal pass schedule will be set up through proper reduction in area and semi-die angle variation.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2000년도 춘계학술발표대회 논문집
• /
• pp.211-214
• /
• 2000

Filament wound pressure vessels have been studied for the efficient design tool to consider the variation of fiber angles through-the thickness direction. Filament winding patterns were simulated from semi-geodesic fiber path equation to calculate fiber path on arbitrary surface. Finite element analyses were performed considering fiber angle variation in longitudinal and thickness directions by ABAQUS. For the finite element modeling of the pressure tank, the 3-dimensional layered solid element was utilized. From the stress results of pressure tanks, maximum stress criterion in transverse direction was applied to modify material properties for failed region. In the end of each load increment, resultant layer stresses were compared with a failure criterion and properties were reduced to 1/10 for a failed layer. Results of progressive failure analysis were compared with two experimental data.