• 한국작물학회지
• /
• 제30권4호
• /
• pp.460-470
• /
• 1985

수도의 source 및 sink관련형질의 품종간 차이를 평가함에 있어서 semi-dwarf indica 및 japonica 조.중만생 10품종 및 semi-dwarf indica 4개 조.만 near-isogenic계통을 각각 네 작기 및 두 작기로 재배하여 수확된 벼 종자를 비중 1.0에서 1.21까지 각 비중별 입수와 입중을 조사, potential kernel size의 결정기준을 설정하고자 했으며, 이 중 semi-dwarf indica 6개 품종을 대상으로 수개 source 및 sink 관련형질의 개체내 및 개체간변이를 조사, 분석하여 품종간차이평가를 위한 효율적인 표본채취방법에 대해서 검토해 보았고, 그 중 3개 신품종과 그들 F$_{5}$계통들에 대한 연차변이 및 품종$\times$환경간 교호작용을 파악함과 동시에 주연개체와 내부개체간의 sink 특성을 비교하여 자체경쟁력의 계통간차이를 평가하고자 했다. 그 결과를 요약하면 다음과 같다. 1. Potential kernel size는 semi-dwarf indica 및japonica 품종 모두 비중 1.15이상인 벼 알의 평균입중으로 결정하는 것이 바람직하다. 2. 분얼의 분화순차와 세력(이삭크기)에 따라 나누어 본 3개경군(강.중.약)간에는 경당엽면적, 수당영화수 및 수당 sink 용량이 현저한 차이를 보였고, 종실축적율, 등숙충실도, potential kernel size 및 sink/source ratio는 강세경과 중세경간에는 유의한 차이를 보이지 않았으나 약세경과는 현저한 차이를 보였는데 품종에 따라서 형질별로 약간씩 그 경향을 달리했다. 3. Source 및 sink 관련형질에 있어서 경군내변이 계수는 강세경<중세경<약세경의 순으로 컸고 전형질에 대한 평균유전율은 약세경 <중세경 <강세경의 순으로 커서 강세경을 개체의 대표치로 품종간변이를 평가하는 것이 바람직할 것으로 생각되었다. 4. 세 신품종의 '82-'83년간 연차변이는 경당엽면적, 주당수수, 엽면적지수 및 정조수량을 제외한 모든 형질에서 유의하게 인정되었으며 년차$\times$품종간 교호작용이 현저히 유의했던 형질은 출수까지 생육일수, 경당엽면적, sink/source ratio, 경당 sink용량 및 수량이었다. 5. 수원 264호/IR1317-70-1 및 내경/IR 1317-70-1 조합에서 선발된 F$_{5}$계통 및 신품종들의 10개 source 및 sink관련형질을 중심으로 주성분 분석을 실시하여 년차간 총합적인 특성의 변이양상을 살펴 본 결과 대체로 '82년에 비해 '83년에 source 및 sink의 양면적인 감소경향을 나타냈는데 제1 및 제 2주성분좌표상에서 년차간 변이정도에 상당한 차이를 보이면서 신품종과 유사한 방향 또는중간형 반응을 보이는 다양한 계통간 차이를 나타냈다. 6. 주연효과가 현저했던 것은 주당영화수, 수당 sink용량 및 종실축적률이었고 potential kernel size는 거의 차이가 없었는데, 특히 수당영화수 및 sink용량에 대한 주연효과정도는 계통에 따라 상당한 차이를 보였다. 계통의 자체경쟁정도는 출수후보다는 출수전 생식생장기간에 더욱 심하고 계통간차이도 큰 것 같았다. 일반적으로 수당sink용량이 클수록 출수전 자체경쟁정도가 심한 경향이었으나 계통에 따라서는 수당 sink용량이 작으면서 자체경쟁도가 심한 것(수원264호 등)이 있는 반면에 수당sink용량이 크면서 자체경쟁도가 심하지 않은 계통도 있었다.

• 한국통계학회:학술대회논문집
• /
• 한국통계학회 2002년도 춘계 학술발표회 논문집
• /
• pp.19-24
• /
• 2002

The two-way balanced one-level rotation design has been discussed (Park, Kim and Choi, 2001), where the two-way balancing is done on interview time in monthly sample and rotation group. We extend it to three-way balanced multi-level design under the most general rotation system. The three-way balancing is accomplished on interview time not only in monthly sample and rotation group but also in recall time. We present the necessary condition and rotation algorithm which guarantee the three-way balancing. We propose multi-level composite estimators (MCE) from this design and derive their variances and mean squared errors (MSE), assuming the correlation from the measurements of the same sample unit and three types of biases in monthly sample.

• Communications for Statistical Applications and Methods
• /
• 제22권6호
• /
• pp.599-604
• /
• 2015

Kendall's tau statistic has been applied to test an association of bivariate random variables. However, incomplete bivariate data with a truncation and a censoring results in incomparable or unorderable pairs. With such a partial information, Tsai (1990) suggested a conditional tau statistic and a test procedure for a quasi independence that was extended to more diverse cases such as double truncation and a semi-competing risk data. In this paper, we also employed a conditional tau statistic to estimate an association of bivariate interval censored data. The suggested method shows a better result in simulation studies than Betensky and Finkelstein's multiple imputation method except a case in cases with strong associations. The association of incubation time and infection time from an AIDS cohort study is estimated as a real data example.

• International Journal of Contents
• /
• 제9권1호
• /
• pp.6-10
• /
• 2013

Foreground estimation in object segmentation has been an important issue for last few decades. In this paper we propose a GrabCut based automatic foreground estimation method using block clustering. GrabCut is one of popular algorithms for image segmentation in 2D image. However GrabCut is semi-automatic algorithm. So it requires the user input a rough boundary for foreground and background. Typically, the user draws a rectangle around the object of interest manually. The goal of proposed method is to generate an initial rectangle automatically. In order to create initial rectangle, we use Gabor filter and Saliency map and then we use 4 features (amount of area, variance, amount of class with boundary area, amount of class with saliency map) to categorize foreground and background. From the experimental results, our proposed algorithm can achieve satisfactory accuracy in object segmentation without any prior information by the user.

• 한국정밀공학회지
• /
• 제26권1호
• /
• pp.43-50
• /
• 2009

Semi dry cutting known as MQL (Minimum Quantity Lubrication) machining is widely spreaded into the machining shops nowadays. The objective of this research is to suggest how to derive optimum cutting conditions for the milling process in MQL machining. To reach these goals, a bunch of finish milling experiments was carried out while varying cutting speed, feed rate, oil quantity, depth of cut and so on with MQL. Then, response surface analysis was introduced for the variance analysis and the regression model with the experimental data. Finally, desirability function based on regression model was used to obtain optimal cutting parameters and verification experiment was done.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.28-33
• /
• 2004

At present, industry and researchers are looking for ways to reduce the use of lubricants because of ecological and economical reasons. Therefore, metal cutting is to move toward dry cutting or semi-dry cutting. This paper presents an investigation into MQL(Minimum Quantity Lubrication) machining with the objective of deriving the optimum cutting conditions for the turning process of SM45C. To reach these goals several finish turning experiments were carried out, varying cutting speed, feed rate and oil quantity, with MQL. The surface roughness results of tests were measured and the effects of cutting conditions were analyzed by the method of Analysis of Variance(ANOVA). From the experimental results and ANOVA, it is found that a better surface roughness can be obtained by decreasing oil quantity and feed rate.

• Communications for Statistical Applications and Methods
• /
• 제15권3호
• /
• pp.333-342
• /
• 2008

회귀모형에서의 변수선택에 관한 정리를 공분산분석 모형으로 확장하였다. 공분산분석 모형에서 몇개의 회귀변수를 제거한 축소모형을 세우는 경우에 추정량의 변화를 알아본 결과, 회귀계수 뿐만아니라 분산분석계수도 추정량의 편차는 증가하지만 분산은 감소하며, 어떤 경우에는 평균제곱오차도 감소한다는 결론을 얻었다.

• 대한토목학회논문집
• /
• 제31권1D호
• /
• pp.141-148
• /
• 2011

인천광역시는 도시 전체의 심각한 교통체증 경감을 위하여 도시철도 1호선(총연장 31.1km)을 1999년 10월 개통하였다. 본 연구는 인천광역시의 도시철도 1호선 개통이 역세권 도시공간에 어떠한 영향을 미치는가에 대한 규명을 통하여 바람직한 역세권 개발방향을 제시하는데 목적이 있으며 이를 위해 국가에서 발간된 통계 자료에 근거하여 분산분석(Analysis of Variance)을 수행하였다. 연구결과 도심형 및 농촌형 역세권은 철도개통에 따라 뚜렷하게 도시공간 변화에 영향을 미쳐 역세권을 형성함에 따라 지역발전을 도모하고 도시기능을 분담하였으나 주거형, 준주거형, 교외형 역세권은 철도개통 후 도시공간 변화에 큰 변화가 없어 역세권이 형성되지 못했다. 따라서 향후 도시철도 개통시 주거형 및 준주거지형 역세권에서는 역세권 입지 특성을 고려하여 주민 및 산업인구를 유인하고 다양한 시설 수요를 창출할 수 있는 계획적 역세권 개발이 요구된다. 한편 교외형 역세권에서는 역사개발 후 자연 발생적 역세권 개발이 현실적으로 어렵기 때문에 도시철도 역사 개발시 역세권 개발을 동시에 추진하여 지역 주민의 삶의 질 향상 및 양호한 생활여건 조성에 앞장서야겠다.

• 한국전문물리치료학회지
• /
• 제11권2호
• /
• pp.17-25
• /
• 2004

The purpose of this study was to assess the effect of applied insole types to lower extremities muscle fatigue during treadmill exercise. The control group and each different insole type group consisted of ten healthy male subjects. In the control group and each different insole type (soft type; 10 shore, semi-rigid type; 33 shore, rigid type; 50 shore) treadmill exercise was performed in twenty-five minutes. The electromyography (EMG) signals of four muscle (tibialis anterior, gastrocnemius medialis, rectus femoris, biceps femoris) were recording at sampling rate of 1024 Hz during treadmill exercise. The localized muscle fatigue (LMF) can be investigated using power spectral analysis. When did data analysis that excepted initial five minutes. The raw EMG signals was processed using the fast Fourier Transformation (FFT) and the median power frequency value was determined in initial ten second period and in last ten second period. Fatigue index was calculated and collected data were statistically analyzed by SPSS version 10.0 two-way using analysis of variance (ANOVA) with repeated measures ($4{\times}4$) was used to determine the main effect and interaction. Post hoc was performed with least significant difference. A level of significance was .05. Muscles fatigue index were significantly decreased in insole types (p<.05) and not significantly different in muscle (p>.05). Post hoc analysis shows that fatigue index in soft insole type, semi-rigid insole type and rigid insole type were lower than that control group (p=.028, p=.146, p=.095). There were no interaction between insole type and muscles (p>.05). The finding of this study can be used as a fundamental data when insole is applied and insole can be used to decreased of a fatigue during the dynamic exercise.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권4호
• /
• pp.1603-1623
• /
• 2020

Multiple Mobile Robots System (MMRS) has shown many attractive features in lots of real-world applications that motivate their rapid and wide diffusion. In MMRS, the Cooperative Localization (CL) is the basis and premise of its high-performance task. However, the statistical characteristics of the system noise should be already known in traditional CL algorithms, which is difficult to satisfy in actual MMRS because of the numerous of disturbances form the complex external environment. So the CL accuracy will be reduced. To solve this problem, an improved Adaptive Active Cooperative Localization (A²CL) algorithm based on information optimization strategy for MMRS is proposed in this manuscript. In this manuscript, an adaptive information fusion algorithm based on the variance component estimation under Extended Kalman filter (VCEKF) method for MMRS is introduced firstly to enhance the robustness and accuracy of information fusion by estimating the covariance matrix of the system noise or observation noise in real time. Besides, to decrease the effect of observation uncertainty on CL accuracy further, an observation optimization strategy based on information theory, the Model Predictive Control (MPC) strategy, is used here to maximize the information amount from observations. And semi-physical simulation experiments were carried out to verity the A²CL algorithm's performance finally. Results proved that the presented A²CL algorithm based on information optimization strategy for MMRS cannot only enhance the CL accuracy effectively but also have good robustness.