• New & Renewable Energy
• /
• v.17 no.1
• /
• pp.40-49
• /
• 2021

In this study, the optical properties, heat transfer capabilities and chemical reaction performance of a methane thermal decomposition reactor using solar heat as a heat source were numerically analyzed on the basis of the cavity shape. The optical properties were analyzed using TracePro, a Monte Carlo ray tracing-based program, and the heat transfer analysis was performed using Fluent, a CFD program. An indirect heating tubular reactor was rotated at a constant speed to prevent damage by the heat source in the solar furnace. The inside of the reactor was filled with a porous catalyst for methane decomposition, and the outside was insulated to reduce heat loss. The performance of the reactor, based on cavity shape, was calculated when solar heat was concentrated on the reactor surface and methane was supplied into the reactor in an environment with a solar irradiance of 700 W/㎡, a wind speed of 1 m/s, and an outdoor temperature of 25℃. Thus, it was confirmed that the heat loss of the full-cavity model decreased to 13% and the methane conversion rate increased by 33.5% when compared to the semi-cavity model.

• Nuclear Engineering and Technology
• /
• v.56 no.3
• /
• pp.959-965
• /
• 2024

The High Temperature Test Unit (HTTU) was an experimental set-up to conduct separate and integral effects tests of the Pebble Bed Modular Reactor (PBMR) core. The annular core consisted of a randomly packed bed of uniform spheres. Natural convection tests using both nitrogen and helium, and forced convection tests using nitrogen, were conducted. The maximum material temperature achieved during forced convection testing was 1200 ℃. This paper presents the numerical analysis of the flow and temperature distribution for a forced convection test using 3D CFD as well as a 1D systems-CFD computer code. Several modelling approaches are possible, ranging from a fully explicit to a semi-implicit method that relies on correlations of their associated phenomena. For the comparison between codes, the analysis was performed using a porous media approach, where the conduction and radiative heat transfer were lumped together as an effective thermal conductivity and the convective heat transfer was correlated between the solid and gas phases. The results from both codes were validated against the experimental measurements. Favourable results were obtained, in particular by the systems-CFD code with minimal computational and time requirements.

• Analytical Science and Technology
• /
• v.29 no.6
• /
• pp.283-292
• /
• 2016

Conventional fingerprint powders used during crime scene investigations pose potential health hazards. Thus, multiple natural replacement powders, including squid ink powder, indigo and rice powder were used to develop (visualize) latent fingerprints on non-porous surfaces (e.g., glass, plastic and tile). Fingerprints developed using the natural powders were compared using the Automatic Fingerprint Identification System (AFIS) with those developed with traditional black powder. The peak areas of ridges were also compared using densitometric image analyses. Collectively, objective and quantitative evaluation methods were developed. The effectiveness of natural powders varied depending on the surface but, in general, squid ink powder performed well on most surfaces. Indigo powder performed well on tile surfaces, while rice powder performed well on glass surfaces. Plastic was the most difficult surface from which to develop fingerprints. Image analysis using Field Emission Scanning Electron Microscopy (SEM) demonstrated the importance of the size and shape of natural powder particles to properly adhere to the ridges. Although densitometric image analyses did not correlate the number of minutiae and ridge peak areas, an unbiased, objective evaluation method would be possible using image analyses with a reference image. Additional experimentation will yield safe and cost-effective natural powders with which adequate fingerprint development can be performed.

• Journal of Conservation Science
• /
• v.34 no.6
• /
• pp.517-524
• /
• 2018

This study using a method different from those employed previously, the anatomical characteristics of paper-mulberry wood were confirmed by observing three different sections. In addition, the factors affecting the pulp and papermaking processes were analyzed in terms of morphological properties such as the fiber length and width, lumen width, and chemical composition of the paper-mulberry bast fiber. The anatomical characteristics of the paper-mulberry wood were a ring porous or semi-ring porous structure with the vessels showing solitary pore and radial array. The medullary ray of the tangential section showed 1-3 rows and common helical thickening. Consequently, the paper-mulberry wood has the same anatomical characteristics throughout. The morphological characteristics of the paper-mulberry bast fiber are a fiber length of 6.58 to 9.01 mm, fiber width of 15.85 to $27.80{\mu}m$, lumen width of 4.50 to $12.54{\mu}m$. The D sample of Gangwon was the most suitable for the pulp and papermaking processes, in terms of its derived morphological ratios. Comparing the chemical compositions, the C sample of Gyeongsang had a high holocellulose content (90%). Thus, the findings herein will aid in determining the quality of Korean paper post production.

• Korean Journal of Food Science and Technology
• /
• v.35 no.1
• /
• pp.103-110
• /
• 2003

Stable production of fermented kanjang containing 1.8% (v/v) ethanol was obtained within four days using traditional kanjang containing 4% added glucose in packed-bed bioreactor systems filled with immobilized Zygosaccharomyces rouxii and Candida versatilis on porous alumina ceramic bead carrier at $28{\pm}0.5^{\circ}C$ and aeration rate of 0.05 vvm. Specific rates of alcohol production for Z. rouxii and C. versatilis were 0.0033 and 0.0031/day, respectively, and those of glucose consumption were both -0.0087/day in the batch type of alcoholic fermentation. In semi-continuous alcoholic fermentation at a dilution rate of 0.25/day, specific rates of alcohol production for Z. rouxii and C. versatilis were 0.0045 and 0.0029/day, and those of glucose consumption were -0.01 and -0.008/day, respectively, using identical bioreactor system. Similar specific rates of alcohol production were observed both in the batch or semi-continuous process and in the continuous one at the dilution rate of 0.25/day. Sensory characteristics of all alcoholic-fermented kanjang by Z. rouxii, C. versatilis, and a mixture of both yeasts (2:1, w/w) were shown to be significantly superior to those of home-made kanjang as revealed through organoleptic evaluation tests (p<0.05).

• Steel and Composite Structures
• /
• v.43 no.1
• /
• pp.91-106
• /
• 2022

This paper has focused on presenting a three dimensional theory of elasticity for free vibration of 3D-graphene foam reinforced polymer matrix composites (GrF-PMC) cylindrical panels resting on two-parameter elastic foundations. The elastic foundation is considered as a Pasternak model with adding a Shear layer to the Winkler model. The porous graphene foams possessing 3D scaffold structures have been introduced into polymers for enhancing the overall stiffness of the composite structure. Also, 3D graphene foams can distribute uniformly or non-uniformly in the shell thickness direction. The effective Young's modulus, mass density and Poisson's ratio are predicted by the rule of mixture. Three complicated equations of motion for the panel under consideration are semi-analytically solved by using 2-D differential quadrature method. The fast rate of convergence and accuracy of the method are investigated through the different solved examples. Because of using two-dimensional generalized differential quadrature method, the present approach makes possible vibration analysis of cylindrical panels with two opposite axial edges simply supported and arbitrary boundary at the curved edges. It is explicated that 3D-GrF skeleton type and weight fraction can significantly affect the vibrational characteristics of GrF-PMC panel resting on two-parameter elastic foundations.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.356-361
• /
• 2018

It is common to analyze volatile organic compound (VOC) or semi-VOC (SVOC) in a sample composed of a complex matrix consisting of multiple components such as bloods through a separation process. Adsorption is a physical phenomenon in which certain components accumulate on the surface of other phases. In order to overcome difficulties in the pretreatment process, an adsorption is frequently used. Solid phase microextraction (SPME) equipment with porous carbon carboxen (CAR) is an example of adsorption application. In this study, the adsorption of 4-octylphenol to carboxen was examined. To do so, the extraction efficiency for such solvents as dichloromethane ($CH_2Cl_2$, DCM), ethylacetate ($CH_3COOC_2H_5$, EA) and diethylether ($C_2H_5OC_2H_5$, $Et_2O$) was studied and also the derivatization reaction for 4-octylphenol with reagents of bistrimethylsilyltrifluoroacetamide (BSTFA), methylchloroformate (MCF) and pentafluorobenzylbromide (PFBBr) was compared. The combination of DCM and BSTFA showed good performance thus they were adopted for this study. Thermodynamic adsorption experiments showed that the adsorption process was endothermic and Freundlich isotherm equation was more suitable than Langmuir isotherm. It was also found that the adsorption followed a pseudo-$2^{nd}$ order kinetic model.