• 전기화학회지
• /
• 제15권3호
• /
• pp.165-171
• /
• 2012

본 연구에서는 전기화학계에서 중요한 다중전자의 이동이 수반되는 전극 반응에 대하여 순환전위법의 특성곡선을 모델링하여, MATLAB 프로그램으로 구현하였다. 전극주변의 전기화학 물질전달계에 대하여 반무한 확산모델의 경계조건을 설정하였고, Fick의 농도방정식은 유한차분법으로 전개하여 수치해를 구하였고, Butler-Volmer 식으로부터 계산된 농도값을 전류의 값으로 전환하였다. 본 연구에서 구현된 수치해는 기존의 실험치들과 합리적으로 설명하고 있었으며, 이를 근거로 다중전자 전기화학 반응계에서 반응메카니즘에 대한 전극반응속도 상수와 CV 주사속도 영향을 효과적으로 해석할 수 있었다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.209-215
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the Pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 한국전자파학회논문지
• /
• 제15권5호
• /
• pp.499-508
• /
• 2004

마이크로스트립 구조체를 해석하는데 있어, 행렬 요소를 해석적으로 계산할 수 있는 효율적인 모멘트법이 제안된다. 본 논문의 모멘트법에서는 공간영역 그린함수로 Bessel 함수의 반 무한구간 정적분에 관한 공식에 근거하여 유도된 새로운 형태의 closed-form 그린함수를 사용한다. 본 논문의 모멘트법을 사용할 경우 기존의 모멘트법의 사용에 비해, 계산량 및 계산 속도와 같은 수치계산 효율 측면에서 약 4배 정도로 개선됨을 알 수 있었다. 본 논문이 제안하는 방법의 타당성을 확인하기 위하여 몇 가지 수치해석 결과를 제시한다.

• 대한토목학회논문집
• /
• 제6권1호
• /
• pp.35-41
• /
• 1986

본 논문에서는 점탄성지반의 지반-구조물 시스템을 해석하는 복합모형기법이 연구되었다. 복합모형은 지반-구조물 시스템을 구조물과 구조물주위의 반구형태의 지반으로 구성된 내부영역과 반구바깥부분의 외부영역으로 나누어 해석하는 방법으로서, 내부영역은 유한요소로 모형화하고 외부영역은 주파수 종속 임피던스로 나타낸다. 점탄성지반에 대한 외부영역 임피던스는 탄성지반에 대하여 구한 임피던스함수에 Hysteretic damping항을 더해주는 방법을 사용하였으며, 이에 대한 검증은 점탄성지반의 강체원형판에 대한 임피던스를 이론적인 값과 비교함으로써 수행되었다. 예제해석은 대형굴뚝에 대하여 수행되었으며, 해석결과를 자주 사용되는 다른 방법에 의한 결과와 비교 검토하였다.

• 대한기계학회논문집
• /
• 제16권4호
• /
• pp.775-786
• /
• 1992

본 연구에서는 DVM의 이론적 배경과 수치계산에 대해 자세히 다루었다. 음향 교란이 가졌을 때의 재부착에 대한 수치해석결과는 Kiya등의 실험결과와 비교하 였으며 만족할만한 일치를 보여주었다. 결과 및 고찰에서는 주로 음향교란이 있는 경우의 재부착길이를 최소화하는 주파수와 교란이 없는 유동의 난류구조해석을 평균속 도 및 압력과 그의 섭동치, 그리고 파워 스펙트럼과 상관계수등을 통해 자세히 비교검 토하였다.

• 대한기계학회논문집A
• /
• 제20권11호
• /
• pp.3454-3462
• /
• 1996

Compared to a full three dimensional FEM, the Slab-FEM hybrid method reduces the required computation time distinctly and it can be applied to the analysis of a shape rolling process. However, the method is somewhat approximate and predictions by the method contain certain inaccuracies. In the present investigation a parameter called T-factor was introduced to compensate the inaccuracies of the method and proper values of the parameter were estimated for different widths of bars and reduction ratios. Then, the method was applied to analyze cold and hot rollings of rectangular bars and predicted results were compared to those of experiments. Nonuniform distributions of temperature in the bars were predicted by utilizing the temperature equation obtained for a semi-infinite solid under radiation and convection boundary conditions. It was found out that accuracies of spread and roll separating force predictions could be enhanced by using proper values of the T-factor.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.563-569
• /
• 2001

The head-capacity curves for pumps developed by the pump manufacturer are based on tests of a single pump operating in a semi-infinite pool with no nearby walls or floors and no stray currents, Hence, flow into the pump suction is symmetrical with no vortices or swirling. Pump station designers rely on these curves to define the operating conditions for the pump selected. But various constraints such as size, cost, and limitations on storage time require walls, floors, and pump intakes to be close proximity to each other. From this background, the authors are carrying out a systematic study on the flow characteristics of intakes within a sump found in pump stations. Model pump intake basin is designed and PIV is adopted as a measuring tool to capture the instantaneous flow patterns. Special attention is paid to investigate the flow patterns near the free surface, side-wall and back-wall due to different clearances from back-wall to vertical in take pipe. Moreover, the locations and vorticities of the various types of vortices that were found in the examinations are discussed.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3686-3694
• /
• 1996

A numerical investigation of natural convection flow along irregular vertical surfaces is reported. A transformation method is applied to the problem of natural convection under the assumption of a large Grashof number. A vertical wavy surface is used as an example to demonstrate the advantages of the transformation method, and to show the heat transfer mechanism near such surfaces. Surface non-uniformities on the boundary layer flow induced by a constant was temperature, semi-infinite surface are investigated. Also the effects of Prandtl number, flow index, and surface amplitude in Non-Newtonian fluids are discussed. When possible, the comparison of the numerical results shows a good agreement. The amplitude is proportional to the amplitude of a wavy surface. The results demonstrate that the local heat flux along a wavy surface is smaller than that of a flat surface. The frequency of the wavy surface is half that of the local heat transfer rate. The amplitude of the local Nusselt number gradually decreases downstream where the natural convection boundary layer grows thick.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3655-3665
• /
• 1996

An analytical solution is presented for the conduction-dominated solidification of a binary mixture in a semi-infinite medium. The present approach differs from that of other solution by these four characteristics. (1) Solid fraction is determined from the phase diagram, (2) thermophysical properties in mushy zone are weighted according to the local solid fraction, (3) non-equilibrium solidification can be simulated and (4) the cooling condition of under-eutectic temperature can be simulated. Up to now, almost all analyses are based on the assumption of constant properties in mushy zone and solid fraction linearly with temperature or length. The validation for these assumptions, however, shows that serious error is found except some special cases. The influence of microscopic model on the macroscopic temperature profile is very small and can be ignored. But the solid fraction and average solid concentration which directly influence the quality of materials are drastically changed by the microscopic models. An approximate solution using the method of weighted residuals is also introduced and shows good agreement with the analytical solution. All calculations are performed for NH$_{4}$Cl-H$_{2}$O and Al-Cu system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.690-695
• /
• 2000

This article deals with the analytic results on the development and application of the Spherical CVT. The Spherical CVT is marked by its simple configuration, the infinite torque multiplication characteristic, and the smooth transitions between forward/neutral/reverse states of output speed. In this study, we describe the conceptual principles behind the Spherical CVT and some applications of it, which we developed recently. And, we propose the shifting algorithm based on the analytic consideration of CVT powertrain system. Contrary to conventional shifting algorithms using the OOL(optimal operating line) of the power source, the proposed shifting algorithm is represented as a $2^{nd}$ order equation in an explicit form, and it reveals the possibility of theoretic design of all optimal controller. As an example, we present numerical results that demonstrate the energy saving possible and the proposed shifting algorithm from the use of the Spherical CVT over standard reduction gear unit, using an ideal dc motor model.