• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.6
• /
• pp.784-790
• /
• 2007

This paper is mainly concerned with the development of the semi-autonomous underwater vehicle (SAUV). Underwater vehicles are affected by external disturbances due to the sea conditions such as currents and waves when it is performing various missions In this paper we present a design scheme of the SAUV system with mathematical models. Also. we present a control system including motion control of motors and main controller and a communication based on CAN method for interrelated control between the controllers and actuators.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.57-62
• /
• 2003

This paper describes the design and simulation of a multivariable optimal control system for the combined speed, heading and depth control of a Semi-Autonomous Underwater Vehicle (SAUV) developed in Korea Ocean Research and Development Institute (KRODI). The SAUV is a test-bed for the evaluation of the navigation and manipulator technologies developed for a mine disposal vehicle (MDV) in military use and for a light working underwater vehicle in scientific use. The vehicle was designed to control its cruising speed, heading and depth with 4 horizontal thrusters installed at the rear of the hull. Therefore, the decoupled control methods are limited to apply to the SAUV because the thrust forces are highly coupled with the surging, yawing, and pitching motion of the vehicle. The multivariable Linear Quadratic (LQ) control method is chosen to control steering and diving in variable speed motion automatically. A series of simulation is carried out with fully nonlinear six degree of freedom dynamic model to validate the controller.

• Journal of Ocean Engineering and Technology
• /
• v.17 no.4
• /
• pp.73-80
• /
• 2003

This paper presents considerations on the results of the rotating arm test, which was carried out for assessment of an hybrid navigation system for a semi-autonomous underwater vehicle. The navigation system consists of an inertial measurement unit(IMU), an ultra-short baseline(USBL) acoustic navigation sensor and a doppler velocity log(DVL) accompanying a magnetic compass. A navigational systemmodel is derived to include the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters are 25 in the order. The extended Kalman filter was used to propagate the error covariance, The rotating arm tests were carried out in the Ocean Engineering Basin of KRISO, to generate circular motion. The hybrid underwater navigation system shows good tracking performance against the circular planar motion. Additionally this paper checked the effects of the sampling ratio of the navigation system and the possibility of the dead reckoning with the DVL and the magnetic compass to estimate the position of the vehicle.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.7 no.2
• /
• pp.409-425
• /
• 2015

In this paper, we employ a dynamics modeling method for investigating a multi-body dynamics system of semi-submersible autonomous underwater vehicles consisting of a towing vehicle operated near the water surface, a tow cable, and a towfish. The towfish, which is towed by a marine cable for the purposes of exploration or mine hunting, is modeled with a Six-Degree-of-Freedom (6-DOF) equation of motion that reflects its hydrodynamics characteristics. The towing cable, which can experience large displacements and deformations, is modeled using an absolute nodal coordinate formulation. To reflect the hydrodynamic characteristics of the cable during motion, the hydrodynamic force due to added mass and the drag force are imposed. To verify the completeness of the modeling, a few simple numerical simulations were conducted, and the results confirm the physical plausibility of the model.

• Design Convergence Study
• /
• v.17 no.4
• /
• pp.17-29
• /
• 2018

In the semi-autonomous vehicle, before reaching a fully autonomous driving stage, it is imperative for the system to issue a take-over request(TOR) that asks a driver to operate manually in a specific situation. The purpose of this study is to compare whether head-up display(HUD) is a better human-vehicle interaction than head-down display(HUD) in the event of TOR. Upon recognition of TOR in the experiment with a driving simulator, participants were prompted to switch over to manual driving after performing a secondart task, that is, playing a game, while in auto-driving mode. The results show that HUD is superior to HDD in 'ease of use' and 'satisfaction' although there is no significant difference in reaction time and subjective workload. Therefore, designing secondary tasks through HUD during autonomous driving situation improves the user experience of the TOR function. The implication of this study lies in the establishing an empirical case for setting up UX design guidelines for autonomous driving context.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.198-203
• /
• 2004

This paper describes a real-time control architecture for DUSAUV (Dual Use Semi-Autonomous Underwater Vehicle), which has been developed at Korea Research Institute of Ships & Ocean Engineering (KRISO), KORDI, for being a test-bed oj development of technologies for underwater navigation and manipulator operation. DUSAUV has three built-in computers, seven thrusters for 6 degree of freedom motion control, one 4-function electric manipulator, one pan/tilt unit for camera, one ballasting motor, built-in power source, and various sensors such as IMU, DVL, sonar, and so on. A supervisor control system for GUI and manipulator operation is mounted on the surface vessel and communicates with vehicle through a fiber optic link. Furthermore, QNX, one of real-time operating system, is ported on the built-in control and navigation computers of vehicle for real-time control purpose, while MicroSoft OS product is ported on the supervisor system for GUI programming convenience. A hierarchical control architecture which consist of three layers (application layer, real-time layer, and physical layer) has been developed for efficient control system of above complex underwater robotic system. The experimental results with implementation of the layered control architecture for various motion control of DUSAUV in a basin of KRISO is also provided.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.141-148
• /
• 2003

This paper presents a rotating ann test for assessment of an underwater hybrid navigation system for a semi-autonomous underwater vehicle. The navigation system consists of an inertial measurement unit (IMU), an ultra-short baseline (USBL) acoustic navigation sensor and a doppler velocity log (DVL) accompanying a magnetic compass. The errors of inertial measurement units increase with time due to the bias errors of gyros and accelerometers. A navigational system model is derived to include the error model of the USBL acoustic navigation sensor and the scale effect and bias errors of the DVL, of which the state equation composed of the navigation states and sensor parameters is 25 in the order. The conventional extended Kalman filter was used to propagate the error covariance, update the measurement errors and correct the state equation when the measurements are available. The rotating ann tests are conducted in the Ocean Engineering Basin of KRISO, KORDI to generate circular motion in laboratory, where the USBL system was absent in the basin. The hybrid underwater navigation system shows good tracking performance against the circular planar motion. Additionally this paper checked the effects of the sampling ratio of the navigation system and the possibility of the dead reckoning with the DVL and the magnetic compass to estimate the position of the vehicle.

• The Magazine of the IEIE
• /
• v.38 no.7
• /
• pp.20-29
• /
• 2011

무인잠수정(Unmanned Underwater Vehicle, UUV)은 하드웨어 구성과 관련하여 ROV (Remotely Operated Vehicle), SAUV (Semi-Autonomous Underwater Vehicle), AUV (Autonomous Underwater Vehicle) 등으로 구분할 수 있으며, 그 중에서 자율무인잠수정(AUV)은 주어진 임무의 난이도, 작업 환경의 정보, 그리고 운용자의 간섭 정도에 따라 다양한 수준으로 자율 정도를 분류한다. 무인잠수정은 미국을 중심으로 1952년부터 개발되기 시작하였으며 최초는 전적으로 운용자에 의해서 직접 운용되는 ROV가 주를 이루었다. 자율무인잠수정은 1980년대부터 다양한 수중관련 기술 및 컴퓨터 발전과, 민군의 사용분야가 증가되면서 급속한 발전을 이루어 왔으며 이에 따라 AUV 자율수준 정의와 기술개발도 급속한 진전이 이루어져 왔다. 본 기고에서는 무인잠수정의 개발현황, 자율개념 및 자율수준(Autonomy Levels for Underwater Vehicle, ALFUV)의 정의, 자율을 정립함에 필요한 방법 또는 기술 등을 알아보고 마지막으로 자율 알고리즘으로 개발된 구조의 표준화를 중심으로 현황을 파악하였으며 또한 미래의 자율수준 개발 동향을 살펴보았다.

• The Journal of the Korea Contents Association
• /
• v.22 no.4
• /
• pp.70-82
• /
• 2022

At the current stage of a semi-autonomous vehicle, there are situations in which the vehicle has to request take-over control to the driver quickly. However, current self-driving cars use only simple messages and warning sounds to notify drivers when handing over control, so they do not adequately convey considerations of individual characteristics or explanations of various emergent situations. This study investigated how visual and auditory information and the efficacy of drivers in self-driving cars can improve efficient take-over requests between the car and the driver. We found that there were significant differences in driver's cognitive load, reliability, safety, usability, and usefulness according to the combination of three visual and auditory information provided in the experiment of the take-over request situation. The results of this study are expected to help design self-driving vehicles that can communicate more safely and efficiently with drivers in urgent control transition situations.

• The Journal of the Korea Contents Association
• /
• v.18 no.8
• /
• pp.92-101
• /
• 2018

As the interactive AI speaker becomes popular, voice recognition is regarded as an important vehicle-driver interaction method in case of autonomous driving situation. The purpose of this study is to confirm whether multimodal interaction in which feedback is transmitted by auditory and visual mode of AI characters on screen is more effective in user experience optimization than auditory mode only. We performed the interaction tasks for the music selection and adjustment through the AI speaker while driving to the experiment participant and measured the information and system quality, presence, the perceived usefulness and ease of use, and the continuance intention. As a result of analysis, the multimodal effect of visual characters was not shown in most user experience factors, and the effect was not shown in the intention of continuous use. Rather, it was found that auditory single mode was more effective than multimodal in information quality factor. In the semi-autonomous driving stage, which requires driver 's cognitive effort, multimodal interaction is not effective in optimizing user experience as compared to single mode interaction.