• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.2
• /
• pp.151-155
• /
• 2020

This study was conducted to determine the effects of the selection of an appropriate sowing method in on ginseng growth, and the results are as follows. SAS (semi-automatic sower), commonly used by direct seeding farms, provides fast operation speed but results in high labor cost, while (Hooper Seeder Sowing) offers fast operation speed and high germination rate, but leads to increased laborer's fatigue. Daily working area per sower was 6,611 ㎡ for a motor type, and the operation time to sow 3,305 ㎡ was 15 hours for broadcast planting, and 8 hours for SAS. The germination rate of 1-year-old ginseng according to direct seeding was 69.1% for the treatment plot under broadcast planting, followed by 66.4% and 67.3% for manual sower and hoop sower, respectively, and the germination rate of SAS was the lowest at 64.2%. In addition, there were no differences in shoot and root growth of 1-year-old ginseng among the sowing methods. Therefore, the sowing method can be chosen depending on the economic size of ginseng farmers. That broadcast sowing (BS) is appropriate for small scale farmers, while motor-driven seeder sowing (MDS) for direct seeding is more suitable for large scale farmers.

• Journal of Bio-Environment Control
• /
• v.6 no.4
• /
• pp.258-263
• /
• 1997

The result was summarized of basic test and field test to find what quantity of irrigation, what state of compaction and what size of transplanting hopper could induce the optimum taking root in the transplantation of plug seedling by transplanters, and thus acquired the basic data for the development of the related transplanters and the optimum growth and development control. Livability of vegetables after transplanting had no significant difference with respect to for the size of hopper, but was greatly affected by the length of seedlings. The longest possible length of seedling for transplanting and optimal length were found to be 30cm and 28cm, respectively. For irrigation when transplanting red pepper or Chinese cabbage it was thought that large-sized hopper was appropriate. The livability of plug seedling 10 days after transplantation was mainly affected by soil moisture content. Consequently it was thought no irrigation would be needed when transplanting at the soil moisture content of more than 18% ; irrigation of more than 50cc would be needed at the soil moisture content of 13% : initial irrigation of more than 100cc and subsequent irrigation would be needed at the soil moisture content of less than 3.8%. The improvement of soil compaction method (left and right side compaction) with conventional semi-automatic transplanter was not necessary, since there was no difference in livability depending on the compaction methods, left-right side compaction or back-forth-left-right side compaction.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.5
• /
• pp.213-222
• /
• 2008

This paper is related to color image segmentation and textile texture mapping for the 2D virtual wearing system. The proposed system is characterized as virtually wearing a new textile pattern selected by user to the clothing shape section, based on its intensity difference map, segmented from a 2D clothes model image using color image segmentation technique. Regardless of color or intensity of model clothes, the proposed system is possible to virtually change the textile pattern or color with holding the illumination and shading properties of the selected clothing shape section, and also to quickly and easily simulate, compare, and select multiple textile pattern combinations for individual styles or entire outfits. The proposed system can provide higher practicality and easy-to-use interface, as it makes real-time processing possible in various digital environment, and creates comparatively natural and realistic virtual wearing styles, and also makes semi-automatic processing possible to reduce the manual works to a minimum. According to the proposed system, it can motivate the creative activity of the designers with simulation results on the effect of textile pattern design on the appearance of clothes without manufacturing physical clothes and, as it can help the purchasers for decision-making with them, promote B2B or B2C e-commerce.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1289-1298
• /
• 2014

Pavement crack sealing method, which is one of the methods to maintain and repair the road, prevents the extending of cracks by repairing cracks in its early occurrence and has already been applied to many roadworks in advanced foreign country for a long time. But in the conventional crack sealing method, traffic accidents occur frequently during the repair because it's commonly performed on the heavy traffic road or highway. It also has some difficulties in securing the safety of workers from the risk of burns caused by heated sealant. In an effort to solve these problems, automated pavement crack sealing machines such as ARMM, OCCSM, TTLS have been developed in advanced foreign country since early 1990s. Also APCS in 2004 and ACSTM in 2013 were already developed domestically. However, since these automated crack sealers developed from a number of research institutions have different test-bed conditions and productivity measurement models, it's difficult to compare and evaluate them objectively. In this study, the image processing time of the respective machines and the movement time of each motion on the work process were estimated by using fully autonomous mapping and semi-automatic mapping in order to measure the productivity in the same environmental conditions. In addition, the productivity measurement test-bed reflected domestic road characteristics was designed to estimate and compare the productivity of the automated crack sealing machines.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.4
• /
• pp.23-30
• /
• 2004

Ontologies play an important role in the Semantic Web by providing well-defined meaning to ontology consumers. But as the ontologies are authored in a bottom-up distributed mimer, a large number of overlapping ontologies are created and used for the similar domains. Ontology sharing and reuse have become a distinguished topic, and ontology merging and alignment are the solutions for the problem. Ontology merging and alignment algorithms previously proposed detect conflicts between concepts by making use of only local syntactic information of concept names. And they depend only on a semi-automatic approach, which makes ontology engineers tedious. Consequently, the quality of merging and alignment tends to be unsatisfying. To remedy the defects of the previous algorithms, we propose a new algorithm for ontology merging and alignment which uses local and global semantic set of a concept. We evaluated our algorithm with several pairs of ontologies written in OWL, and achieved around 91% of precision in merging and alignment. We expect that, with the widespread use of web ontology, the need for ontology sharing and reuse ill become higher, and our proposed algorithm can significantly reduce the time required for ontology development. And also, our algorithm can easily be applied to various fields such as ontology mapping where semantic information exchange is a requirement.

• Current Research on Agriculture and Life Sciences
• /
• v.19
• /
• pp.23-29
• /
• 2001

This study was carried out to develop a seedling raising method without nursery soils in automatic raising facility of rice seedlings for machine transplanting. Pre-germinated seeds were sowed on the seed trays with three different seats such as paper seat, corrugated board, and polyethylene film instead of nursery soils. The growth characteristics of the seedlings for 20 days after sowing were compared with that of a conventional standard raising method with nursery soils. There was no difference in plant height of 10-day old seedlings among the different nursery methods, but the plant height of seedlings grown for 15 days after sowing in the trays with fivefold newspaper and nursery soils was significantly taller than those on other nursery conditions. Dry weight of seedlings grown in the tray with fivefold newspaper bottom was heavier than those in nursery trays with a corrugated board and a piece of polyethylene film. The seedlings grown in a nursery tray with fivefold newspaper showed better seedling quality and root-mat formation compared with the other nursery trays. This result suggests that the healthy seedlings for machine transplanting can be raised in the paper-sheet tray without nursery soils. The labour hours and cost required for the soil-free method using paper was reduced by about 49.3% and 26.6%, respectively, compared with the semi-adult seedling on nursery soils.

• Journal of Broadcast Engineering
• /
• v.15 no.2
• /
• pp.163-172
• /
• 2010

The free viewpoint video delivers an active contents where users can see the images rendered from the viewpoints chosen by them. Its applications are found in broad areas, especially museum tour, entertainment and so forth. As a new free-viewpoint application, this paper presents a stereoscopic free-viewpoint TIP (Tour Into Picture) where users can navigate the inside of a single image controlling a virtual camera and utilizing depth data. Unlike conventional TIP methods providing 2D image or video, our proposed method can provide users with 3D stereoscopic and free-viewpoint contents. Navigating a picture with stereoscopic viewing can deliver more realistic and immersive perception. The method uses semi-automatic processing to make foreground mask, background image, and depth map. The second step is to navigate the single picture and to obtain rendered images by perspective projection. For the free-viewpoint viewing, a virtual camera whose operations include translation, rotation, look-around, and zooming is operated. In experiments, the proposed method was tested eth 'Danopungjun' that is one of famous paintings made in Chosun Dynasty. The free-viewpoint software is developed based on MFC Visual C++ and OpenGL libraries.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.15 no.1
• /
• pp.87-98
• /
• 2012

A river boundary is defined as the intersection between a main stream of a river and the land. Mapping of the river boundary is important for the protection of the properties in river areas, the prevention of flooding and the monitoring of the topographic changes in river areas. However, the utilization of the ground surveying technologies is not efficient for the mapping of the river boundary due to the irregular surfaces of river zones and the dynamic changes of water level of a river stream. Recently, the spatial information data sets such as the airborne LiDAR and aerial images are widely used for coastal mapping due to the acquisition of the topographic information without human accessibility. Due to these advantages, this research proposes a semi-automatic method for mapping of the river boundary using the spatial information data set such as the airborne LiDAR and the aerial photographs. Multiple image processing technologies such as the image segmentation algorithm and the edge detection algorithm are applied for the generation of the 3D river boundary using the aerial photographs and airborne topographic LiDAR data. Check points determined by the experienced expert are used for the measurement of the horizontal and vertical accuracy of the generated 3D river boundary. Statistical results show that the generated river boundary has a high accuracy in horizontal and vertical direction.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.4
• /
• pp.979-991
• /
• 2016

Measuring nation images was a challenging task when employing offline surveys was the only option. It was not only prohibitively expensive, but too much time-consuming and therefore unfitted to this rapidly changing world. Although demands for monitoring real-time nation images were ever-increasing, an affordable and reliable solution to measure nation images has not been available up to this date. The researcher in this study developed a semi-automatic ontology construction algorithm, named "double-crossing double keyword collection (or DCDKC)" to measure nation images from Wikipedia in real-time. The ontology, WikiOnto, can be used to reflect dynamic image changes. In this study, an instance of WikiOnto was constructed by applying the algorithm to the big-three exporting countries in East Asia, Korea, Japan, and China. Then, the numbers of page views for words in the instance of WikiOnto were counted. A collection of the counting for each country was compared to each other to inspect the possibility to use for dynamic nation images. As for the conclusion, the result shows how the images of the three countries have changed for the period the study was performed. It confirms that DCDKC can very well be used for a real-time nation-image monitoring system.

• Journal of the HCI Society of Korea
• /
• v.7 no.2
• /
• pp.35-42
• /
• 2012

The purpose of this study was to evaluate the usability of the tablet PC-based Korean high-tech AAC(Augmentative Alternative Communication System) software. In order to develop an AAC software which is appropriate to Korean cultural/linguistic contexts and communication needs of the users, we examined the necessity and ease of use for the communication functions that are required in native Korean communication, such as polite expressions, tense expressions, negative expressions, subject-verb auto-matching, and automatic sentence generation functions, using a scenario-based user testing. We also investigated the users' needs, preferences, and satisfaction for the tablet PC-based Korean high tech AAC using a semi-structured and open questionnaires. The participants of this study were 9 special education teachers, 6 speech therapists, and 6 parents whose children had communication disabilities. The results of the usability testing of the tablet PC-based Korean high-tech AAC software presented positive responses in general, by indicating overall scores of above 4 out of 5 except in tense and negative expressions. The necessity and ease of use in the tense and negative expressions were evaluated relatively low, and it might be related to the inconsistent interface with the polite expressions. In terms of the user interface(UI), there were users' needs for clear visual feedback in the symbol selection and display, consistent interface for all functions, more natural subject-verb auto-matching, and spacing in the text within symbols. The results of the usability testing and users' feedback might serve as a guideline to compensate and improve the function and UI of the existing AAC software.