• Journal of Biomedical Engineering Research
• /
• 제29권3호
• /
• pp.179-186
• /
• 2008

This paper presents a portable tele-assessment system designed for remote evaluation of the hypertonic elbow joint of neurologically impaired patients. A patient's upper limb was securely strapped to a portable limb-stretching device which is connected through Internet to a portable haptic device by which a clinician remotely moved the patient's elbow joint and felt the resistance from the patient. Elbow flexion angle and joint torques were measured from both master and slave devices and bilaterally fed back to their counterparts. In order to overcome problems associated with the network latency, two different tele-operation schemes were proposed depending on relative speed of tasks compared to the amount of time delay. For slow movement tasks, the bilateral tele-operation was achieved in real-time by designing control architectures after causality analysis. For fast movement tasks, we used a semi-real-time tele-operation scheme which provided the clinicians with stable and transparent feeling. The tele-assessment system was verified experimentally on patients with stroke. The devices were made portable and low cost, which makes it potentially more accessible to patients in remote areas.

• Journal of the Korean Vacuum Society
• /
• 제12권4호
• /
• pp.257-262
• /
• 2003

The structure and optical properties of n-type and p-type porous silicon (PS) prepared by the chemical etching in the light and the dark, respectively, are reported in this paper. Microstructural features of the samples are mainly investigated by SEM, AFM XRDGI techniques. Also, their optical properties are investigated by photoluminescence (PL) and Fourier transform infrared absorption measurements. In the n-type PS, the room temperature photoluminescence is observed in a visible range from 500 nm to 650 nm in contrast to that in the blue region (400∼650 nm) in p-type PS. Further, semi-transparent Cu films in thickness range of ∼40 nm are deposited by rf-magnetron sputtering on PS to investigate the I-V characteristics of the samples.

• Journal of the Korean Solar Energy Society
• /
• 제39권4호
• /
• pp.25-39
• /
• 2019

Luminescent solar concentrator (LSC), consisting of luminophore included glass or substrate with edge-mounted photovoltaic cell, is semi-transparent, energy harvesting devices. The luminophore absorbs incident solar light and re-emit photons, while the waveguide plate allows re-emitted photons to reach edge or bottom mounted photovoltaic cells with reduced losses. If the area of LSC is much larger than that of photovoltaic cell, this system can effectively concentrate solar light. In order to improve the performance of LSC, new materials and optical structures have been suggested by many research groups. For decreasing re-abosprion losses, it is essential to minimize the overlap between absorption and photoluminescence solar spectrum of luminophoroe. Moreover, the combination of selective top reflector and reflective optical cavity structure significantly boosts the waveguide efficiency in the LSC. As a result of many efforts, commercially available LSCs have been demonstrated and verified in the outdoor. Also, it is expected to generate electricity in buildings by replacing conventional glass to LSCs.

• Journal of the Korean Society for Marine Environment & Energy
• /
• 제4권4호
• /
• pp.3-11
• /
• 2001

To know the seawater infiltration into tidal flat sediment in coastal area is very important, because it is significantly correlated with the infiltration and transportation of pollutants in soil, the supply of dissolved oxygen, nutrients and organic matter to benthic organisms for survival of benthic organisms and the seawater purification. So, we set up purpose to clarify the infiltration behavior of seawater by wave action in tidal flat, to clear the effects of slope of tidal flat and breaking wave height on seawater infiltration and to quantify the infiltration volume of seawater. For purpose, the seawater infiltration was studied with visualization method by using coloring tracer and transparent glass beads replaced as natural sediment in model tidal flat. Specific conclusions derived from this study are as follows. The semi-circular type infiltration of seawater by wave action into saturated sediment was a new infiltration behavior that was not considered in previous studies. The infiltration rate of seawater was increased with increasing of breaking wave height and slope of tidal flat. However, the effects of the slope was bigger than that of breaking wave height on seawater infiltration into tidal flat sediments. It was possible to calculate the infiltration volume of seawater by wave action in natural tidal flat sediment and in fields. Therefore, we can point out that wave action play an important role in the supply of dissolved oxygen, nutrients and organic matter to benthic organisms, transportation or diffusion of pollutants and seawater purification. So, we hope to be studied the supply of food to benthic organism, pollutant transport and seawater purification on the base of these results.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제37권2호
• /
• pp.159-169
• /
• 2004

Sedimentation and depositional pattern of the fine-grained sediments in the southeastern inner shelf of Korea were studied using a very high-resolution seismic profiles and sediment data. The recent mud deposits up to 45 m thick are distributed in the inner shelf forming a nearshore belt from the eastern part of Geoje Island to off the Pohang along the coast. The sediment in this area consists of homogeneous mud with mean grain size between $8.6\;to\;5.3\phi$ and does not show any distinct variability It gradually becomes finer and well sorted northeastward along the coast. Sediments normally appear as structureless massive mud but X-radiographs show that some bioturbation and faint lamination are present. The sediments accumulate at a rate of 0.18-0.44 cm/yr and the rate coincides well with the long-term (a 1000-year scale) accumulation based on very high-resolution seismic data. Distribution of wet bulk density and velocity shows a gradual increase from the southeastern part of Ulsan to off Pohang, whereas porosity shows a reverse pattern. Correlations between velocity and porosity/mean grain size are different from other regions compared, due to the difference of sediment texture and sedimentary environment. The recent shelf deposits are seismically characterized by three distinct facies: 1) well-stratified (near the river mouth), 2) semi-transparent (eastern part of Geoje Island), and 3) transparent (off Ulsan). The results suggest that fine-grained sediment derived from rivers, forming a nearshore mud belt, have been transported northeastward by the northeastward-flowing coastal current.

• The Journal of the Korea Contents Association
• /
• 제8권10호
• /
• pp.54-63
• /
• 2008

With the improvement of computer performance in Mobile Environments, the users demand for the multimedia player is getting higher, which will be the major force behind the wide distribution of the media player that allows several moving pictures to run simultaneously using multiple windows on the screen. Products that adopted the same method used for a single moving picture and yet support the several moving pictures simultaneously emerged; however, they are not immune from problems. In this paper, we propose method to solve the problems of blinking, play prioritization processor and semi-transparent processor that occur when appling several moving pictures to the method used for a single moving picture and suggested the possible solutions. Taking it one step further, it focused on design and implementation of the media player that allows several moving pictures using overlapping and overlay technique by recognizing the biggest problem, which is that the above media play is not supported when playing several moving pictures simultaneously.

• The Korean Journal of Mycology
• /
• 제25권2호통권81호
• /
• pp.121-129
• /
• 1997

Tricholoma matsutake (TM=T. caligatum var. nauseoum) is, for an agricultural income earned by Forestry by-products, a very important mushroom in Korea. The mycelia isolated from the basidiocarps were compared with basidiocarps of TM by the random amplified polymorphisms of RAPD-DNA bands. The mycelia were confirmed to be originated from the basidiocarps of TM by cluster analyses of the DNA-bands made from RAPDs and Southern blotting with the band (0.75 kb) identified. The mycelia defined were observed to grow very slowly at the rate of 10 cm per month at $25^{\circ}C$ and also to be semi-transparent and submerged in on PDA. The method developed in this work was considered to be very useful for confirming the mycelia originated from the ectomycorrhizal mushrooms and also to be applied for the fungal mycelia isolated from the commercial useful mushrooms.

• Polymer(Korea)
• /
• 제36권6호
• /
• pp.727-732
• /
• 2012

Baroplastic poly(butyl acrylate) (PBA)/polystyrene (PS) blends were prepared by mixing PBA and PS emulsions synthesized by cationic and anionic surfactant, respectively. Interestingly, the heterocoagulation of nanoparticles have found to be affected strongly by emulsion concentration but the blends have been prepared with almost same compositions regardless of the amount of reactants. Utilizing this method, PBA/PS/Si hybrid nano-blends were prepared successfully via electrostatic attraction forces between PBA, PS and silica nanoparticles. The hybrid nano-blend having 2 or 5 wt% of silica was then processed to a semi-transparent film at $25^{\circ}C$ under 13.8 MPa for 10 min, which showed 3.0 MPa of tensile strength and 25 MPa of elastic modulus. Therefore, the heterocoagulation technique can be used for preparing baroplastics with uniform compositions of polymer and silica nanoparticles.

• Proceedings of the Korean Vacuum Society Conference
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.293.1-293.1
• /
• 2016

Various materials including conductive, dielectric, and semi-conductive materials, constitute suitable candidates for printed electronics. Metal nanoparticles (e.g. Ag, Cu, Ni, Au) are typically used in conductive ink. However, easily oxidized metals, such as Cu, must be processed at low temperatures and as such, photonic sintering has gained significant attention as a new low-temperature processing method. This method is based on the principle of selective heating of a strongly absorbent film, without light-source-induced damage to the transparent substrate. However, Cu nanoparticles used in inks are susceptible to the growth of a native copper-oxide layer on their surface. Copper-oxide-nanoparticle ink subjected to a reduction mechanism has therefore been introduced in an attempt to achieve long-term stability and reliability. In this work, a flash-light sintering process was used for the reduction of an inkjet-printed Cu(II)O thin film to a Cu film. Using a photographic lighting instrument, the intensity of the light (or intense pulse light) was controlled by the charged power (Ws). The resulting changes in the structure, as well as the optical and electrical properties of the light-irradiated Cu(II)O films, were investigated. A Cu thin film was obtained from Cu(II)O via photo-thermal reduction at 2500 Ws. More importantly, at one shot of 3000 Ws, a low sheet resistance value ($0.2527{\Omega}/sq.$) and a high resistivity (${\sim}5.05-6.32{\times}10^{-8}{\Omega}m$), which was ~3.0-3.8 times that of bulk Cu was achieved for the ~200-250-nm-thick film.

• Korean Journal of Clinical Pharmacy
• /
• 제19권2호
• /
• pp.81-88
• /
• 2009

Objectives: With more and more health economic evaluations being performed in many countries, the question of whether the results from the foreign studies can be transferred to other country is becoming important. The objective of this study was to conduct a case study using three transferability diagnosis tools for economic evaluation on rheumatoid arthritis. Methods: Three diagnosis tools were used to assess transferability: Welte's tool, Boulenger's and Urdahl's. Five researchers who have experience on economic evaluation made consensus on the evaluation through the semi-delphi method. Results: With Welte's tool, absolute and relative prices in healthcare, practice variation, health-status preference, productivity and work-loss time were evaluated as biased. The transferability information score by Boulenger's was 85.9%, which means qood quality reporting. In case of Urdahl's, research questions were well defined and reporting was transparent and explicitly stated. However, both the relevance of data inputs to Korea and robustness of model were relatively low. In conclusion the UK study on rheumatoid arthritis could be partially transferable to Korea, and will need modeling-based adjustments.