• 한국강구조학회 논문집
• /
• 제12권4호통권47호
• /
• pp.339-350
• /
• 2000

본 연구의 목적은 개량 T-stub를 이용한 1층 1스팬 골조의 구조적 거동을 파악하고 중층규모의 건축물에 대하여 개량 T-stub의 적용가능성을 확인하기 위한 것이다. 연구방법으로 개량 T-stub 및 기존 T-stub를 이용한 반강접 골조의 반복가력실험을 하였으며 개량 T-stub의 플랜지 두께와 볼트중심거리를 변수로 하여 유한요소해석을 수행하여 그 결과를 실험결과와 비교하였다. 본 연구의 실험 및 해석결과로부터 개량 T-stub의 거동을 정성적으로 파악하고 반강접합부로서의 적용가능성을 확인하였다.

• Structural Engineering and Mechanics
• /
• 제48권1호
• /
• pp.57-75
• /
• 2013

It is still inadequate for investigating the highly nonlinear and complex mechanical behaviors of single-layer latticed domes by only performing a force-based demand-capacity analysis. The energy-based balance method has been largely accepted for assessing the seismic performance of a structure in recent years. The various factors, such as span-to-rise ratio, joint rigidity and damping model, have a remarkable effect on the load-carrying capacity of a single-layer latticed dome. Therefore, it is necessary to determine the maximum load-carrying capacity of a dome under extreme loading conditions. In this paper, a mechanical model for members of the semi-rigidly jointed single-layer latticed domes, which combines fiber section model with semi-rigid connections, is proposed. The static load-carrying capacity and seismic performance on the single-layer latticed domes are evaluated by means of the mechanical model. In these analyses, different geometric parameters, joint rigidities and roof loads are discussed. The buckling behaviors of members and damage distribution of the structure are presented in detail. The sensitivity of dynamic demand parameters of the structures subjected to strong earthquakes to the damping is analyzed. The results are helpful to have a better understanding of the seismic performance of the single-layer latticed domes.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1999년도 가을 학술발표회 논문집
• /
• pp.403-410
• /
• 1999

General1y, H-section is used for columns and beams in the middle and low steel building, But it has a strong and weak axis. Thus if H-section is used for columns, the structure needs reinforcement on the weak axis. Therefore recently, square holler section(S.H.S) is used for columns because it is able to coiler the vulnerability of H-section. Structural analysis is usually executed under the assumption that connections are either ideally pinned joint or fully rigid joint. Actually all connections are semi-rigid which possess a rotational stiffness. Therefore it can be designed economically as using the property of connections which has a rotational stiffness. This paper presents a prediction model curve which is fitted Kishi-Chen power Model about the behavior of connection between H-beam and S.H.S column. Non-linear analysis program was considered the non-linearity of semi-rigid connection and the geometrical non-linearity under the effect of axial force. It was programed by FORTRAN90 and Visual Basic.

• Structural Engineering and Mechanics
• /
• 제12권4호
• /
• pp.397-408
• /
• 2001

Bolted connections are used commonly in the precast reinforced concrete structures. In such structures, to perform structural analysis, behaviour of connections must be determined. In this study, elastic rotation stiffness of semi-rigid bolted beam connections, applied in industrial precast structures, are determined by finite element methods. The results obtained from numerical solutions are compared with an experimental study carried out for the same connections. Furthermore, stress distributions of the connection zone are determined and a reinforcement scheme is proposed. Thus, a more appropriate reinforcement arrangement for the connection zone is enabled. The connection joint of the prefabricated frame is described as rigid, hinged or elastic, and a static analysis of the frame system is performed for each case. Values of bending moments and displacements obtained from the three solutions are compared and the effects of elastic connection are discussed.

• Journal of the Korean Wood Science and Technology
• /
• 제45권5호
• /
• pp.535-543
• /
• 2017

목구조물 기둥-보 접합물로는 슬릿 가공된 부재에 강판을 삽입한 형상이 통용되고 있다. 본 연구에서는 접합부가 접착된 강절형 문형라멘프레임 및 강판 대용인 목질접합물을 제작하여 절반은 기둥부재에 일체화하고 나머지 절반은 보부재와 핀으로 접합한 반강절형 문형라멘프레임을 제작하였다. 목질 문형라멘프레임들은 강판삽입형 접합부 문형라멘프레임과 수평내력성능을 비교 분석하였다. 수평내력성능은 완전탄소성모델 분석과 구간별 강성변화율 및 단기허용전단내력으로 평가하였다. 실험결과, 강절형 문형라멘프레임의 최대내력이 강판삽입형 접합부 문형라멘프레임 보다 낮게 측정되어 항복 내력은 0.58, 종국내력은 0.48로 산출되었으나, 초기강성과 소성률은 각각 1.35, 1.1 향상된 값이 측정되었다. 반강절형 문형라멘프레임의 완전탄소성모델 분석 결과 최대내력은 강절형 문형라멘프레임보다 낮았으나 파괴 후 인성이 우수하여 종국내력은 1.05~1.07 높은 값이 산출되었다. 강판삽입형 문형라멘프레임은 반복 시험이 진행됨에 따라 강성이 급격히 감소한 반면 접합부가 목질로된 문형라멘프레임들의 강성은 서서히 감소되었다.

• 한국가구학회지
• /
• 제23권3호
• /
• pp.290-297
• /
• 2012

Recently, interest in wooden construction have been growing by increasing needs and demands for eco-friendly and traditional wooden building(Hanok). Especially, Hanok has the technical development in manufacturing the mortise-tenon joint without fasteners(precut), so it could be called to modernization, industrialization and popularization. But the structural design and analysis of the structure were not regulated and had the difficulty to consider the variation of wooden member and to conduct the difficulty in the structural analysis and the design of the joint. In this study, the stiffness ratio of wooden mortise and tenon joint was evaluated according to the vertical loading, lintel and loading speed. The joint was distinguished in semi-rigid joint regardless of their factors. The stiffness ratio was 0.40 in vertical loading, 0.50 without vertical loading and 0.44 in horizontal loading with high speed. This study would be utilized to the structural analysis and design with structural analysis and design program.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.301-304
• /
• 2008

선시공 조립식 거푸집 공법을 사용한 계단의 접합부는 힌지로 처리하여 구조설계를 하는 것이 일반적인 방법이다. 계단참과 경사계단이 만나는 접합부를 힌지로 간주하게 되면 접합부의 모멘트 성능이 전혀 없으므로 계단부분의 휨모멘트가 증가하게 되어 철근 배근량이 늘어난다. 또한 진동 및 피로하중에 의한 접합부 손실이 증가하여 사용성이 저하된다. 그럼에도 불구하고 계단 접합부를 핀접합하는 이유는 현장에서의 시공성이 용이하기 때문이다. 최근들어 시공성을 고려하면서 접합부의 휨성능을 향상시킬 수 있는 반강접에 대한 상세가 제시되고 있으나, 이러한 상세를 구조설계에 전혀 반영하지는 못하고 있다. 따라서 본 연구에서는 계단의 반강접 접합부를 설계에 반영할 수 있는 방법을 제시하고자 하였다. 강접합, 반강접합, 핀접합으로 설계된 계단 접합부에 대해 모멘트 성능을 비교하고, 부정정 구조물인 계단 코아부분의 비선형 해석을 통해 항복 이후의 변화를 비교하였다. 연구결과 반강접합 성능을 반영하기 위한 휨강성계수를 도입하였고, 이를 적용한 비선형 해석결과 핀접합보다는 안정적인 결과를 보였고, 강접합에 비해 연성이 뛰어나 내진 및 진동에 대해 유리한 시스템으로 판단된다.

• Steel and Composite Structures
• /
• 제1권2호
• /
• pp.213-230
• /
• 2001

This paper presents a simplified approach for the design of semi-continuous composite beams in braced frames, where specific attention is given to the effect of joint rotational stiffness. A simple composite beam model is proposed incorporating the effects of semi-rigid end connections and the nonprismatic properties of a 'cracked' steel-concrete beam. This beam model is extended to a sub-frame in which the restraining effects from the adjoining members are considered. Parametric studies are performed on several sub-frame models and the results are used to show that it is possible to correlate the amount of moment redistribution of semi-continuous beam within the sub-frame using an equivalent stiffness of the connection. Deflection equations are derived for semi-continuous composite beams subjected to various loading and parametric studies on beam vibrations are conducted. The proposed method may be applied using a simple computer or spreadsheet program.

• Structural Engineering and Mechanics
• /
• 제10권1호
• /
• pp.27-36
• /
• 2000

The Oktalok nodal connection system is an aesthetic and efficient system. It has been widely used throughout Australia. The paper will briefly introduce the concept and application of the Oktalok nodal system. The existing design method is based on the assumption that the joints are pin-ended, i.e., the rotational stiffness of the joints is zero. However the ultimate capacity of the frame may increase significantly depending on the rotational stiffness of the joints. Stiffness tests and finite element simulations were carried out to determine the rotational stiffness of the Oktalok joints. Column buckling tests and non-linear finite element analyses were performed to determine the member capacity of columns with semi-rigid end conditions. A simple formulae for the effective length factor of column buckling is derived based on the above experimental and theoretical investigations.

• 한국강구조학회 논문집
• /
• 제11권2호통권39호
• /
• pp.241-241
• /
• 1999

강구조 건축물의 해석과 설계는 기둥-보 접합부가 완전강접이나 핀접합이라는 가정하에 일반적으로 이루어진다. 그러나 실제로는 많은 경우의 접합부형태들이 반강접합의 거동을 보이고 있다. 필자 등은 개량 T-stub로서 SM490강재를 이용하여 반강접합부의 거동을 조사한 바 있다. 본 연구의 목적은 SS400강재로 된 개량 T-stub를 이용한 기둥-보 반강접합부의 구조적 거동을 조사하기 위한 것이다. 연구방법으로서 개량 T-stub요소의 인장, 압축실험과 해석 및 개량 T-stub를 이용한 기둥-보 접합부의 단조가력 및 반복가력실험을 실시하였다. 본 연구의 실험결과로부터 개량 T-stub를 이용한 반강접합부의 적용가능성이 확인되었다.