• 한국소음진동공학회논문집
• /
• 제19권11호
• /
• pp.1126-1132
• /
• 2009

Bridge structures are designed to support ordinary loadings such as vehicles, wind, temperature and current as well as unexpected loadings like earthquakes and storm. Especially, the displacement of Flexible bridges like an suspension bridge under ordinary loading conditions is necessary to be monitored. In case of long span bridges, there are some difficulties in monitoring the displacement of center of the main span using traditional laser displacement sensors. In this study, the static and dynamic displacement responses due to vehicle loadings were measured by DGPS(differential global positioning system) technique. The displacement response data were compared with data obtained from traditional laser displacement sensors so that the static and dynamic behavior of the bridge under vehicle loadings was examined and the applicability of the displacement response measurement using DGPS technique was verified. The static and dynamic loading test for an self-anchored suspension bridge, So-rok Bridge, was performed using vehicles. The displacement response from DGPS technique and that from laser displacement sensors of the bridge monitoring system were compared. The amplitude of white noise from DGPS based measurement was about 7 mm and that of laser displacement sensor based measurement was about 3 mm. On the other hand, dynamic behavior of the center of main span from DGPS based measurement showed better agreement with influence line of the bridge than that from laser displacement sensors. In addition, there were some irregular and discontinuous variation of data due to the instability of GPS receivers or frequent appearance of GPS satellites. Post-processing via the reference station close to an observation post provided by NGII(National Geographic Information Institute) will be a counter-plan for these defects.

• Korean Journal of Geomatics
• /
• 제5권1호
• /
• pp.7-19
• /
• 2005

Photogrammetric mapping procedures have gone through major developments due to significant improvements in its underlying technologies. The availability of GPS/INS systems greatly assist in direct geo-referencing of the acquired imagery. Still, photogrammetric datasets taken without the aid of positioning and navigation systems need control information for the purpose of surface reconstruction. Point features were, and still are, the primary source of control for the photogrammetric triangulation although other higher-order features are available and can be used. LIDAR systems supply dense geometric surface information in the form of three dimensional coordinates with respect to certain reference system. Considering the accuracy improvement of LIDAR systems in the recent years, LIDAR data is considered a viable supply of photogrammetric control. To exploit LIDAR data, new challenges are poised concerning the representation and reference system by which both the photogrammetric and LIDAR datasets are described. In this paper, registration methodologies will be devised for the purpose of integrating the LIDAR data into the photogrammetric triangulation. Such registration methodologies have to deal with three issues: registration primitives, transformation parameters, and similarity measures. Two methodologies will be introduced that utilize straight-line and areal features derived from both datasets as the registration primitives. The first methodology directly incorporates the LIDAR lines as control information in the photogrammetric triangulation, while in the second methodology, LIDAR patches are used to produce and align the photogrammetric model. Also, camera self-calibration experiments were conducted on simulated and real data to test the feasibility of using LIDAR patches for this purpose.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2009년도 공동학술대회
• /
• pp.19-20
• /
• 2009

국제해사기구(International Maritime Organization, IMO)에서는 선박의 해상 충돌을 방지하기 위하여 SOLAS Chapter 5의 요구조건에 따라 모든 선박에 대하여 선박자동식별장치(Automatic Identification System, AIS)를 의무적으로 장착하도록 권고하고 있다. AIS를 사용하면 타선에 대한 제원 및 항행정보의 획득이 가능하여 충돌방지뿐만 아니라 광역관제, 조난 선박의 탐색구조 등 안전관리에도 활용이 가능하다. 본 논문에서는 AIS 장비를 사용하여 ADS-B(Automatic Dependent Surveillance-Broadcast) 개념 기반의 항공감시용 송수신기를 구현한 결과에 대하여 살펴보도록 한다. 기본적으로 AIS는 해상에서 사용되기 때문에 고도 정보를 사용하지 않지만, AIS 장비 내부에 사용하는 GIS 칩셋에서 제공하는 고도 정보의 추출이 가능하다. 고도 정보를 포함한 감시 메시지 형식을 정의하고, SOTDMA(Self-Organizing Time Division Multiple Access) 방식을 개선하여 ADS-B 송수신기를 구현하였다. 적용 결과를 확인하기 위하여 지상시험 및 비행시험을 수행하였다.

• 수산해양기술연구
• /
• 제54권2호
• /
• pp.107-115
• /
• 2018

In this study, we tested Japanese trolling lines in the Jeju fishery. This fishery simulates the natural marine environment with many seabed rocks, and has been redesigned and manufactured it to be suitable for the Jeju fishery. In order to ensure that the trolling lines were deployed at the inhabitation depth of hairtails, the conditions required for the fishing gear to reach the target depth were determined for use during the experiment. The experimental test fishing was conducted at the depth of 120 m water in front of Jeju Seongsanpo and in the offshore area of Jeju Hanlim. The fishing gear used in the test fishing is currently used in a variety of field operations in Japan. However, several problems were identified, such as twisting of the line during its deployment and excessive sinking of the main line. The fishing gear was, therefore, redesigned and manufactured to be more suitable for the Jeju fishery environment. For the fishing gear to accurately reach the target depth, depth loggers were installed at the starting point of the main line and at the 250 m and 340 m points of the line. Depth and time were recorded every 10 seconds. According to the daytime positioning of hairtails in the lower water column, the target depth of the fishing gear was set at 100-110 m, which was 10-20 m above the sea floor. At a speed of 1.9 knots and with a 9 kg sinker attached, the main fishing line was deployed and catch yields at depths of 100 m, 150 m and 180 m were recorded and analyzed. When the 180 m main line was fully deployed, the time for the hairtail trolling lines to arrive at the appropriate configuration had to be 5 minutes. At this time, the depth of the fishing gear was 16-23 m above the sea floor, in accordance with the depths at which the hairtails were during the day. In addition, in order to accurately place the fishing gear at the inhabitation water depth of hairtails, the experimental test fishing utilized the results of the depth testing that identified the conditions required for the fishing gear to reach the target depth, and the result was a catch of up to 97 kg a day.

• 복식
• /
• 제55권7호
• /
• pp.101-113
• /
• 2005

The purpose of this research was to identify the perception maps of Imported make-up brands and advertising images by analyzing their ads in periodicals from 2004 S/S. A self-administered questionnaire included seven adjectives to describe the brand and advertising images of the imported make-up products. Data was analyzed by using the KYST, CORAN, and SPSS programs, the positioning through Multi-Dimensional Scaling. The results of the research were as follows: 1. The perception of the brand images of Chanel, Chiristian Dior, and Lancome was the highest. The advertising images of Clinique and Bourjois were the highest and that of Shiseido was the lowest. 2. The respondents perceived Christian Dior and Chanel to be similar in the brand image factors of good quality, sophistication and uniqueness. Christian Dior, Chanel, and Lancome were all perceived similarly in their degree of familiarity and level of stimulation.

• 한국전기전자재료학회논문지
• /
• 제20권1호
• /
• pp.14-18
• /
• 2007

The electric property in the $GaAs-Al_{x}Ga_{1-x}$ quantum well with the Si ${\delta}-doping$ layer in a non-central position is studied through the effect of the electric field intensity on the electron distribution. The finite difference method is used for the calculation of the subband energy level and its wavefunction. In order to account for the change of the potential energy due to the charged particles, the self consistent method is employed. As the Si ${\delta}-doping$ layer becomes closer to the heterojunction interface, the electrons less affected by Coulomb scattering are greatly increased under the external electric field. Therefore, the high speed device is suggested due to the fact that the high mobility electrons can be increased by positioning the ${\delta}-doping$ layer in the quantum well and by applying the electric field intensity.

• 복식문화연구
• /
• 제17권1호
• /
• pp.120-131
• /
• 2009

The purpose of this study was to suggest the repositioning strategy for Korean character/career women's wear brands by comparing them with masstige brands. The subjects were 240 Women in their twenties and early forties in Seoul and the metropolitan area. The data had been collected by self-administered questionnaire and analyzed by frequency and biplot. The results of the study were as follows: (1) The brand preference was 'Time'(33.3%), 'Michaa'(12.5%), and then 'Mine'(8.8%) in sequence; (2) For brand differentiation, the attributes of 'store image', 'comfortableness', 'brand reputation', and 'promotion' were found out to be important in sequence; (3) The national character/career brands were favored by theirs 'store image', 'quality', and 'design', while imported masstige brands were favored by theirs 'comfortableness', 'brand reputation', 'promotion', and 'perceived price'; (4) Among brands, 'Time' had been highly evaluated, but comparatively showed weakness on 'perceived price', 'comfortableness', and 'promotion'.

• 여성건강간호학회지
• /
• 제17권4호
• /
• pp.317-327
• /
• 2011

Purpose: This study was conducted to analyze and clarify the concept of the effective breastfeeding. Methods: This study used Walker and Avant's process of concept analysis. Results: Effective breastfeeding is how to give infant adequate milk, which fulfills needs of mother and infant, from her breast so that they can be satisfied with the process and results. It included the effective breastfeeding properties as follows: feeding behaviors (positioning, latch on, and suckling), transferring a breast milk to an infant, mother-infant interaction, and satisfying their desires (satisfaction, comfort, mother's self-confidence, infant's adequate weight gain and defecation, adequate breastfeeding interval). The antecedent of effective breastfeeding were anatomical and functional normal breast, breastfeeding knowledge and steady-state of mother, and feeding desire, rooting reflex and normal oral cavity of infant. The consequences of effective breastfeeding were exclusive breastfeeding, infant and maternal health and wellbeing, and achievement of mother and infant attachment. Conclusion: The meaning of effective breastfeeding defined in this study will contribute to develop the effectiveness breastfeeding assessment tool and the nursing intervention for ineffective breastfeeding.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권5호
• /
• pp.566-572
• /
• 2014

Recently, indoor navigation has been applied in large convention centers by using wireless sensor networks (WSNs), which provide not only a user's path to be traveled but also orientation and shopping information to increase user's convenience. This paper presents the localization system for estimating relative coordinates without pre-deployment of the reference node based on ultra wide band (UWB) ranging system, which is relatively suitable for indoor localization compared to other wireless communications, and azimuth sensor. The proposed localization system which consists of an azimuth sensor and a mobile node composed of three nodes estimates relative coordinates of the reference node without applying any recursive and time consumption algorithms. Also, in the process of estimating relative coordinates of the reference node, ranging errors are minimized through the proposed technique and the number of nodes can be reduced. Experimental results show the feasibility and validity of the proposed system.

• 한국정밀공학회지
• /
• 제23권5호
• /
• pp.177-183
• /
• 2006

A tape feeder is an important feeding device to supply micro-chips such as 1005 and 0603 components to PCB in SMT process. Traditionally, tape feeding methods using sprocket wheel mechanism has been used for the pickup system of chip-mounters. However, there is growing needs for new feeding mechanism with high accuracy and confidence as electric components are getting much smaller. Thus, recently, a tape feeder using cam-slider mechanism is developed to meet such requirements. The major advantages of developed system are; significantly reduced indexing and backlash errors, slim and compact design, and improved repetitive capacity compared to existing system. In this paper, the performance evaluation criteria for the developed tape feeder are suggested. Stability against induced vibration, positioning accuracy, cycle time, durability and supply error rate are estimated using developed self testers. As a result, the excellence of developed tape feeding mechanism is validated using the effective rating methods.