• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.7
• /
• pp.502-509
• /
• 2002

A two-degree of freedom model Is suggested to understand the basic dynamical behaviors of the interaction between two masses of the friction induced vibration system. The two masses may be considered as the pad and the dusk of the brake. The phase space analysis is performed to understand complicated dynamics of the non-linear model. Attractors in the phase space are examined for various conditions of the parameters of the model especially by emphasizing on the damping parameters. In certain conditions, the attractor becomes a limit cycle showing the stick-slip phenomena. In this Paper, not only titre existence of the limit cycle but also the sloe of the limit cycle is examined to demonstrate the non-linear dynamics that leads the unstable state. For the two different cases of the system frequency[(1) Two masses with same natural frequencies, (2) with different natural frequencies] . the propensity of limit cycle Is discussed In detail. The results show an important fact that it may make the system worse when too much damping Is present in the only one part of the masses.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.56-61
• /
• 1996

In this paper, new buck converter of a TV power system is presented. First, we devised a revised driving circuit for an emitter-coupled type buck converter, by which it is possible to reduce the material cost of transformers and voltage stress of power device. Secondly, we adopted a hybrid oscillation technique. When TV system is in off-stage, initial standby power which is necessary for remote controllable TV system is supplied by self-oscillating mode. Main power which is necessry in TV system bing on state is provided by an externally triggered oscillating mode. The switching frequency is synchronized to the oscillating frequency of horizontal deflection in TV, by which we can reduce picture noises and the size of power transformer. Thirdly, a simple error amplifier is inserted to the feed-back loop to keep the output voltage constant which means pulse width modulatio mode is added in driving part of power device. Finally, we showed by experiments that our proposed converter performs well enough to be close to the theoretically predicted values.

• The Journal of the Korean dental association
• /
• v.55 no.2
• /
• pp.172-179
• /
• 2017

Since early model of powered toothbrush (Broxadent) was introduced in the 1960s, the design of powered toothbrush has changed significantly. Today powered toothbrushes can be categorized as mechanical and sonic. The main patterns of movements in the modern powered toothbrushes are oscillation, reciprocation, and rotational. Powered brushes especially helpful for people who have disabilities or dexterity issue. These brushes are also highly recommended for patients who require a larger handle because these are easier to grasp. By systematic review of Cochrane group in 2014, powered toothbrushes reduced dental plaque and gingivitis more than manual toothbrushing in the short and long term. Now we can recommend powered toothbrushes to people who need to enhance self-control dental plaque removal efficacy.

• Journal of KSNVE
• /
• v.4 no.3
• /
• pp.365-375
• /
• 1994

Periodic longitudinal vibrations of a video and audio tape and the like used for transducing pictures and sounds may be induced by self-excited vibrations which are caused by frictions against the heads and guides, and their eccentricity, noncircularity or irregularity. It is important to analyze the longitudinal vibration of a tape because it causes distortions of a reproduced signal. It is difficult to measure directly the longitudinal vibration. In this paper a method estimating longitudinal vibration using impulse responses in the transverse direction is presented. And, the parameters boundary domain where the transverse and longitudinal vibration can be decoupled is introduced. In the domain where the both vibrations are decoupled, analytic methods using frequency characteristics and transient responses of the transverse vibration, respectively, are presented. The time domain method predicted more exactly the instantaneous phase of the longitudinal vibration than frequency domain method did.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.1
• /
• pp.129-137
• /
• 1995

AlGaAs/GaAs HBTs have been fabricated using SABM (Self-Aligned Base Metal) process technique. The mesa type HBTs were fabricated through following steps: isolation implant, wet etching, metal lift-off, and airbridge interconnection process. The fabricated HBTs with 2umx10um size emitter showed a common emitter current gain of 10 at a collector current density of Jk=100kA/cm$^{2}$, a breakdown volgate BVCEO of 8V, and the ideality factors of base and collector junctions of 1.6 and 1.1, respectively. On-wafer S-Parameter measurement at 0.5~18GHz has been made for the characterization of the common emitter HBTx with a 2umx10um size emitter. The extrapolated current gain cut-off frequency of ft=30GHz and maximum oscillation frequency of fmax=23 GHz were obtained at a collector current density of Jc=70kA/cm$^{2}$. Small signal HBT equivalent circuit was extracted from the S-Parameter data.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.177-181
• /
• 2002

In this paper, the cancellation or suppression of the feedback interference from Tx antenna using the same frequency is studied. The major problems on the wireless communication system using the same frequency or on-frequency repeater (OFR) are the coupling and isolation between Rx and Tx antenna. In order to increase the isolation between Rx and Tx antenna and to Prevent the self-oscillation of the receiver system, this paper is verified the possibility of the application of interference cancellation system and proposed the design method of the OFR using interference cancellation system.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.51 no.10
• /
• pp.483-494
• /
• 2002

In this thesis an optimal design technique of fuzzy logic controller using the real variable elitist genetic algorithm(RVEGA) as a supplementary control to Static Var Compensator(SVC) in order to damp oscillation in an AC-DC Dower system was proposed. Fuzzy logic controller is designed self-tuning shape of fuzzy rule and fuzzy variable using genetic algorithm based on natural selection and natural genetics. To verify the robustness of the proposed method, considered dynamic response of system by applying a load fluctuation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.355-357
• /
• 2014

The usefulness of unsteady combustion was experimentally investigated using confined premixed flames stabilized by a rearward-facing step. For this purpose, apparatus of forced pulsating mixture supply, which could be modulated its amplitude and frequency, was designed. The unsteady combustion used in this experiment plays an important role in controlling self-excited combustion oscillations and furthermore it exhibits desirable performance, from a practical point of view, such as high load combustion and reduction of pollutant emission like nitric oxide.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.395-396
• /
• 2013

고주파 유도가열 시스템은 고효율 및 생산의 편의성으로 산업 전반에 걸쳐 다양하게 적용되고 있다. 이러한 고주파 유도 가열 시스템은 크게 정류부, 전압조절부, 공진형 인버터로 구분된다. 공진형 인버터는 공진 주파수로 스위칭 시, 순수 실수 어드미턴스만 남게 되어 최대 효율을 얻는다. 공진 주파수는 공진회로의 입력 어드미턴스에 의해 결정되는데, 용융과정에서 피가열체의 저항 값은 시간에 따라 변화한다. 이는 전체 입력 어드미턴스의 변화와 공진 주파수의 변화로 나타나고, 효율이 저하되는 단점이 있다. 본 논문에서는 공진 인버터의 공진 주파수를 스스로 추종하는 자기공진 추종 토폴로지를 제안한다. 제안된 토폴로지는 고주파 유도가열 시스템의 용융과정에서 피가열체의 저항 값이 시변하여 공진 주파수가 이동하더라도 반주기 내에 정확하게 추종 동작을 한다. 본 논문에서는 제안된 자동 공진 추종회로를 기존의 병렬 공진 유도가열 시스템에 적용하여 타당성을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1206-1208
• /
• 2000

The Static var compensators(SVC) are intensively studied to realize high performance power equipment for electric power systems. Rapid and continuous reactive compensation by the SVC contributes to voltage stabilization, power oscillation damping, overvoltage suppression, minimization of transmission losses and so on. In this paper, instantaneous power vector theory which can expresses the instantaneous apparent power vector is proposed to control reactive power. The validity of the proposed method is confirmed by simulation studies.