• Journal of Preventive Medicine and Public Health
• /
• v.38 no.1
• /
• pp.107-116
• /
• 2005

Objectives : We analyzed the changes from 1996 to 2002 in distributive equity of the contribution burden in the Korean National Health Insurance. Methods : The study subjects were a total of 8,923 employee households and a total of 7,296 self-employed households over the period from 1996 to 2002. Those were the households meeting the two criteria as completing each annual survey and having no change in the job of head of the household during that period from the raw data of the Household Income and Expenditure Survey annually conducted by the Korean National Statistical Office. The unit of analysis was a household, and this was the standard for assessing the contribution that is now applied on a monthly basis. Deciles Distribution Ratio, Contribution Concentration Curve and Contribution Concentration Index were estimated as the index of inequality. Multiple regression analysis was conducted to compare the annual ability-to-pay elasticity of the contribution to the reference year of 1996 for three groups (all households, the employee households, and the self-employed households). Results : For the index of inequality, the distributive equity of contribution was improved in all three groups. In particular, the employee group experienced a substantial improvement. Using multiple regression analysis, the ability-to-pay elasticity of the contribution in the employee group significantly increased ($\beta$=0.232, p<0.0001) in the year 2002 as compared to the reference year of 1996. The elasticity in the self-employed group also significantly increased ($\beta$=0.186, p<0.05), although its change was smaller than that in the employee group. Conclusions : The employee group had a greater improvement for the distributive equity of the contribution burden than the self-employed group. Within the observation period, there were two important integration reforms: one was the integration of 227 self-employed societies in 1998 and the other was the integration of 139 employee societies in 2000. We expected that the equity of the contribution burden would be improved for the self-employed group since the integration reform of 1998. However, it was not improved for the self-employed group until the year 2000. This result suggests that capturing exactly the beneficiaries' ability-to-pay such as income is the precedent for distributive equity of the contribution burden, although a more sophisticated imposition standard of contribution is needed.

• Advances in nano research
• /
• v.15 no.6
• /
• pp.495-511
• /
• 2023

In this research, the impact of micro-silica, nano-silica, and polypropylene fibers on the fracture energy of self-compacting concrete was thoroughly examined. Enhancing the fracture energy is very important to increase the crack propagation resistance. The study focused on evaluating the self-compacting properties of the concrete through various tests, including J-ring, V-funnel, slump flow, and T50 tests. Additionally, the mechanical properties of the concrete, such as compressive and tensile strengths, modulus of elasticity, and fracture parameters were investigated on hardened specimens after 28 days. The results demonstrated that the incorporation of micro-silica and nano-silica not only decreased the rheological aspects of self-compacting concrete but also significantly enhanced its mechanical properties, particularly the compressive strength. On the other hand, the inclusion of polypropylene fibers had a positive impact on fracture parameters, tensile strength, and flexural strength of the specimens. Utilizing the response surface method, the relationship between micro-silica, nano-silica, and fibers was established. The optimal combination for achieving the highest compressive strength was found to be 5% micro-silica, 0.75% nano-silica, and 0.1% fibers. Furthermore, for obtaining the best mixture with superior tensile strength, flexural strength, modulus of elasticity, and fracture energy, the ideal proportion was determined as 5% micro-silica, 0.75% nano-silica, and 0.15% fibers. Compared to the control mixture, the aforementioned parameters showed significant improvements of 26.3%, 30.3%, 34.3%, and 34.3%, respectively. In order to accurately model the tensile cracking of concrete, the authors used softening curves derived from an inverse algorithm proposed by them. This method allowed for a precise and detailed analysis of the concrete under tensile stress. This study explores the effects of micro-silica, nano-silica, and polypropylene fibers on self-compacting concrete and shows their influences on the fracture energy and various mechanical properties of the concrete. The results offer valuable insights for optimizing the concrete mix to achieve desired strength and performance characteristics.

• Computers and Concrete
• /
• v.19 no.1
• /
• pp.33-39
• /
• 2017

In this study, two types of aggregate were used for making self-compacting concrete. Standard cubic specimens were exposed to different temperatures. Seventy-two standard cylindrical specimens ($150{\times}300mm$) and Seventy-two cubic specimens (150 mm) were tested. Compressive strengths of the manufactured specimens at $23^{\circ}C$ were about 33 MPa to 40 MPa. The variable parameters among the self-compacting concrete specimens were of sand stone type. The specimens were exposed to 23, 100, 200, 400, 600, and $800^{\circ}C$ and their mechanical specifications were controlled. The heated specimens were subjected to the unconfined compression test with a quasi-static loading rate. The corresponding stress-strain curves and modulus of elasticity were compared. The results showed that, at higher temperatures, Scoria aggregate showed less sensitivity than ordinary aggregate. The concrete made with Scoria aggregate exhibited less strain. The heated self-compacting concrete had similar slopes before and after the peak. In fact, increasing heat produced gradual symmetrical stress-strain diagram span.

• Journal of Oral Medicine and Pain
• /
• v.32 no.3
• /
• pp.319-328
• /
• 2007

The purpose of this study was to quantitatively assess treatment effect of physical therapy on experimentally-induced masseter muscle fatigue by two parameters of muscle stiffness and elasticity. Three physical therapeutic modalities inducing electroacupunture stimulation therapy(EAST), Microwave diathermy and low-level laser therapy(LLLT) were compared. 10 healthy volunteers with normal occlusion (mean age of $26.3{\pm}1.16$ years, M:F=1:1) were participated in this study. All subjects were asked to chew gum on the right side until they felt pain(more and VAS 5 (0 to 10)) and their masseter muscles were examined with a tactile sensor in order to evaluate changes of stiffness and elasticity according to gum chewing and three physical therapeutic modalities. Subjective discomfort or pain was self-estimated by VAS as well. Unilateral gum chewing increased stiffness and decreased elasticity only on the chewing side but VAS increased on the both sides(p<0.05). EAST or Microwave diathermy greatly decreased stiffness and VAS and increased elasticity(p<0.05) but LLLT did not exhibit significant difference. From the results of this study, it is concluded that both EAST and Microwave diathermy have favorable effect on stiffness and elasticity of muscles and pain relief while effect of LLLT is not reliable. In addition, experimental unilateral gum chewing compromises stiffness and elasticity of masseter muscles only the chewing side while subjective discomfort or pain can be felt on the both sides.

• Advances in concrete construction
• /
• v.16 no.5
• /
• pp.269-276
• /
• 2023

In order to study the effect of rubber particle size and admixture on the frost resistance of self-compacting concrete, three self-compacting concrete specimens with equal volume replacement of fine aggregate by rubber particles of different particle sizes were prepared, while conventional self-compacting concrete was made as a comparison specimen. The degradation law of rubber aggregate self-compacted concrete under freeze-thaw cycles was investigated by fast-freezing method test. The results show that the rubber aggregate has some influence on the mechanical properties and freeze-thaw durability of the self-compacting concrete. With the increase of rubber aggregate, the compressive strength of self-compacting concrete gradually decreases, and the smaller the rubber aggregate particle size is, the smaller the effect on the compressive strength of the matrix; rubber aggregate can improve the frost resistance of self-compacting concrete, and the smaller the rubber particle size is, the more obvious the effect on the improvement of the frost resistance of the matrix under the same dosage. Through the research of this paper, it is recommended to use 60~80 purpose rubber aggregate and the substitution rate of 10% is chosen as the best effect.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.1
• /
• pp.105-114
• /
• 1999

By using the conceptual impedance and the elasticity of a serial chain of spring-damper system, a real-time collision-free trajectory generation algorithm is proposed. The reference points on a trajectory connected by the spring-damper system have a mechanism for self-Position adjustment to avoid a collision by the impedance, and the local adjustment of each reference point is propagated through the elasticity to a real robot at the end of the spring-damper system. As a result, the overall trajectory consisting of the reference points becomes free of collision with environmental obstacles and efficient having the shortest distance as possible. In this process, the reference points connected by the spring-damper system take role of virtual robot as global guidance for a real robot, and a cooperative optimization is carried out by the system of virtual robots. A control algorithm is proposed to implement the impedance for a car-like mobile robot.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.92-93
• /
• 2015

The main purpose of this paper is to present the dynamic test method developed for measuring the elastic modulus of sound insulating coat. The test setup was devised based on the theoretical natural frequency of a simply-supported beam subject to free transverse vibration. A stainless steel beam was tested and the result showed a good compliance with the standard value listed in literatures. The result indicates that the test set up can serve as a quick, economical and suitable scheme to test non self-supporting materials.

• Journal of Korea Trade
• /
• v.23 no.6
• /
• pp.131-144
• /
• 2019

Purpose - The purpose of this study was to investigate market power of soybeans exported by the United States to Korea. Particularly, this paper considered dichotomous characteristics of genetically modified (GM) soybeans and non-GM soybeans and conducted empirical analysis of these two segregated soybean markets to understand key tenets of market power in international soybean trade. Design/methodology - The difference in market power between GM and non-GM soybeans was analyzed using Residual Demand Elasticity (RDE) and Residual Supply Elasticity (RSE) models over the period of 2008~2018. RDE and RSE models under an imperfect competition condition were used to estimate market margins and determine whether GM and non-GM exporters or importers exercised market power in the destination market. Findings - Empirical results suggested that the U.S. had a market power on both GM and non-GM soybean exports. GM exports had greater market power than non-GM exports (14% vs. 9%). By contrast, Korea showed an inability to grab market margin or exert market power in soybean imports. Both export supply by the U.S. and import demand by Korea were found to be more responsive to price changes of GM soybeans than to prices changes of non-GM soybeans. This might be due to a self-interested, profit-seeking strategy by the exporter and many concerned consumers regarding potential adverse effects of GMOs in the importing country. Originality/value - This paper fills the literature gap by exploiting market power in both GM and non-GM markets with explicit consideration of price correlations between GM and non-GM soybeans in Korea. A number of existing studies have provided evidence for market power broadly embedded in international commodity trade. However, studies focusing on Korean markets are limited. No study has explored the country's soybean trade. Furthermore, the majority of prior studies have almost exclusively focused on the market power from a standpoint of exporting countries without discussing importers' market structure. This paper also sought to understand potentially distinguished patterns of market power between GM and non-GM markets.

• Korean Journal of Social Welfare Studies
• /
• v.41 no.1
• /
• pp.65-84
• /
• 2010

The purpose of Inequality Index Decomposition is to know the cause of overall inequality through decomposing aggregate inequality index into relevant components. Previous studies have mostly focused on the absolute contribution meaning that how much each component possesses out of overall inequality. However it could be more important to know the marginal contribution and inequality effect of each component in order to implement policies reducing overall inequality effectively. For this, we decomposed Gini Coefficient as representative inequality index into income sources or social welfare programs and calculated each Gini Income Elasticity(GIE). Analysis result says that regular employee income and employer(or the self-employed) income, of which GIE are 1.205 and 1.867, are classified as inequality-increasing income source. GIE can be one of good methods to analyse the inequality effect of various income sources and social welfare programs.

• Journal of Creative Information Culture
• /
• v.6 no.1
• /
• pp.1-13
• /
• 2020

The purpose of this study is to develop and implement education programs for the science high school students who entered by affirmative action. The program was developed with the goal of bridging the educational gap through effective school adaptation of these students. The program was applied, and then pre-post academic self-efficacy and self-elasticity tests and interviews were conducted. 70 students participated in the before entrance program, 56 of them participated in the summer vacation program, and 36 of them participated in one-on-one interviews related to the effectiveness of the program. In the test results, there was a significant difference only in self-elasticity, and in the interview results, it was found that the program was very helpful in terms of academic and school life. Suggestions for further support and studies were provided.