• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.284-287
• /
• 2001

This paper presents the robust control simulation of a composite beam using self-sensing actuators(SSA). The self-sensing actuator is a new concept for intelligent material, where a single piezoelectric element simultaneously functions as both a sensor and an actuator. In a practical implementation of the self-sensing actuator an electrical bridge circuit is used to measure strain. The circuit could provide significant information about strain in the element if it were well-balanced. Our aim is design a robust controller which guarantees that the performance of a self-sensing actuator is robust against perturbation of the bridge balance and to confirm the advantages of this technique. Simulation results show that the self-sensing actuator driven by the designed controller exhibits excellent performance in suppressing the vibration of a composite beam.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.366-372
• /
• 2007

Self-sensing measurement of piezo inkjet and its application are discussed. The pressure wave inside the inkjet dispenser was measured by current measurement due to self-sensing capability of PZT. The pressure wave measured from current was verified by commercially available laser vibrometer. Here, two applications using self-sensing signal were discussed: waveform design for high speed jetting and condition monitoring. For waveform design, two pulse waveform was designed based on self-sensing signal such that the pressure wave after droplet formation can be minimized. For condition monitoring, self-sensing signal was shown to be effective in detecting air bubble trapped in inkjet printhead.

• Smart Structures and Systems
• /
• v.15 no.4
• /
• pp.1103-1120
• /
• 2015

A self-sensing magnetorheological (MR) damper with embedded piezoelectric force sensor has recently been devised to facilitate real-time close-looped control of structural vibration in a simple and reliable manner. The development and characterization of the self-sensing MR damper are presented based on experimental work, which demonstrates its reliable force sensing and controllable damping capabilities. With the use of experimental data acquired under harmonic loading, a nonparametric dynamic model is formulated to portray the nonlinear behaviors of the self-sensing MR damper based on NARX modeling and neural network techniques. The Bayesian regularization is adopted in the network training procedure to eschew overfitting problem and enhance generalization. Verification results indicate that the developed NARX network model accurately describes the forward dynamics of the self-sensing MR damper and has superior prediction performance and generalization capability over a Bouc-Wen parametric model.

• International Journal of Aeronautical and Space Sciences
• /
• v.11 no.3
• /
• pp.155-166
• /
• 2010

I review research on self-sensing and structural optimizations of laminated carbon/epoxy composites in Japan. Self-sensing is one of the multiple functions of composites; i.e., carbon fiber is used as a sensor as well as reinforcement. I present a controversial issue in self-sensing and detail research results. Structural optimization of laminated CFRP composites is indispensable in reducing the weights of modern aerospace structural components. I present a modified efficient global search method using the multi-objective genetic algorithm and fractal branch and bound method. My group has focused its research on these subjects and our research results are presented here.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.5
• /
• pp.139-146
• /
• 2023

In this study, compressive strength and adhesion strength were measured as repair materials to evaluate the mechanical and electrical properties of compression and shear specimens with self-sensing repair materials. As a result of the experiment, the strength improvement rate of the compression test specimen was higher than the section enlargement area ratio, but the shear test specimen did not show an improvement in strength as much as the section enlargement area ratio. Compression experiments under load showed high correlation between FCR-Strain and FCR-Stress, confirming self-sensing performance. However, the shear test did not show as much correlation as the compression test. Accordingly, it is judged that the self-sensing repair material is suitable for the compression member on which the compression load acts in the building.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.67-75
• /
• 2007

This paper deals with a problem of vibration suppression of a piezoelectric beam using a self-sensing algorithm. Two methods, which are PPF(positive position feedback) and SRF(strain rate feedback), are considered to suppress a residual vibration of a piezoelectric beam developed during the step positioning of a beam end point. A self-sensing algorithm treated here is basically a strain rate estimator of a beam movement and is to be used for the closed loop control. The efficacy of the proposed idea is evaluated through experiments.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.5
• /
• pp.765-771
• /
• 2017

This paper presents concurrent design methods of surface permanent magnet synchronous machines for saliency-tracking self-sensing position estimation. Magnetic saliency for the self-sensing is created by stator pole saturation due to the rotor zigzag leakage flux. The power conversion properties such as saliency ratio, torque ripple, and efficiency vary according to motor design. The property change due to design modification is analysed by using finite element analysis, and with the appropriate design modification, proper saliency is created while preserving their power conversion capabilities.

• Journal of Mechanical Science and Technology
• /
• v.16 no.3
• /
• pp.310-319
• /
• 2002

This paper deals with the analytical modeling, and the experimental verification of the strain rate self-sensing method using a hybrid adaptive filter for a cantilevered piezoelectric beam. The piezoelectric beam consists of two laminated lead zirconium titanates (PZT) on a metal shim. A mathematical model of the beam dynamics is derived by Hamilton's principle and the accuracy of the modeling is verified through the comparison with experimental results. For the strain rate estimation of the cantilevered piezoelectric beam, a self-sensing mechanism using a hybrid adaptive filter is considered. The discrete parts of this mechanism are realized by the DS1103 DSP board manufactured by dSPACE$\^$TM/. The efficacy of this method is investigated through the comparison of experimental results with the predictions from the derived analytical model.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.7
• /
• pp.787-793
• /
• 1999

A self-sensing magnetic suspension system utilizing a LC resonant circuit is proposed by using the characteristic that the inductance of the magnetic system is varied with respect to the air gap displacement. An external capacitor is added into the electric system to make the levitation system be statically stable system, which much relieves the control effort required to stabilize the magnetic suspension system of haying an intrinsic unstable nature. For the realization of the self- sensing magnetically levitated system, an amplitude modulation / demodulation method is used with a positive position feedback controller Experimental results are presented to validate the proposed method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.11
• /
• pp.2561-2576
• /
• 2013

The ship ad-hoc network (SANET) extends the coverage of the high data-rate terrestrial communications to the ships with the reduced cost in maritime communications. Cognitive radio (CR) has the ability of sensing the radio environment and dynamically reconfiguring the operating parameters, which can make SANET utilize the spectrum efficiently. However, due to the dynamic topology nature and no central entity for data fusion in SANET, the interference brought into the primary network caused by the hidden primary user requires to be carefully managed by a sort of decentralized cooperative spectrum sensing schemes. In this paper, we propose a self-weighted decentralized cooperative spectrum sensing (SWDCSS) scheme to solve such a problem. The analytical and simulation results show that the proposed SWDCSS scheme is reliable to detect the primary user in SANET. As a result, secondary network can efficiently utilize the spectrum band of primary network with little interference to primary network. Referring the complementary receiver operating characteristic (ROC) curves, we observe that with a given false alarm probability, our proposed algorithm reduces the missing probability by 27% than the traditional embedded spectrally agile radio protocol for evacuation (ESCAPE) algorithm in the best condition.