• 전자공학회논문지B
• /
• 제33B권9호
• /
• pp.24-36
• /
• 1996

In this paper, we discuss the errors in selectivity estimation using the multilevel grid file (MLGF). We first demonstrate that the estimatio errors stem from the uniformity assumption that records are uniformly distributed in their belonging region represented by an entry in a level of an MLGF directory. Bsed on this demonstration, we then investigate five factors affecting the accuracy of estimation: (1) the data distribution in a region (2) the number of records stored in an MLFG (3) the page size, (4) the query region size, and (5) the level of an MLFG directory. Next we present the tendancy of estimation errors according to the change of values for each factor through experiments. The results show that the errors decrease when (1) the distribution of records in a region becomes closer to the uniform one, (2) the number of records in an MLFG increases, (3) the page size decreases, (4) the query region size increases, and (5) the level of an MLFG directory employed as data distribution information becomes lower. After the definition of the granule ratio, the core formula representing the basic relationship between the estimation errors and the above five factors, we finally examine the change of estimation errors according to the change of the values for the granule ratio through experiments. The results indicate that errors tend to be similar depending on the values for the granule ratio regardless of the various changes of the values for the five factors. factors affecting the accuracy of estimation:

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.43-47
• /
• 1999

Pd-ceramic composite membranes and catalytic membrane reactors(CMR) have been studied for hydrogen purification and recovery in th fusion reactor fuel cycle. The development of techniques for coating microporous ceramic tubes with Pd and Pd/Ag layers is described: composite membranes have been produced by electroless deposition (Pd/Ag film of 10-20${\mu}{\textrm}{m}$) and rolling of thin metal sheet (Pd and Pd/ Ag membranes of 50-70 ${\mu}{\textrm}{m}$). Experimental results on electroless membranes showed that the metallic film presented some defects and the membranes had not complete hydrogen selectivity . Then the catalytic membrane reactors with electroless membranes can be applied for some industrial processes that do not require a complete separation of the hydrogen (i.e. in the dehydrogenation of hydrocarbons). The rolled thin Pd/Ag membranes separated the hydrogen from the other gas with a complete selectivity and exhibited a slightly larger (about a factor 1.7) mass transfer resistance with respect to the electroless membranes. Experimental tests confirmed the good performances in terms of durability.

• 대한화학회지
• /
• 제36권4호
• /
• pp.558-564
• /
• 1992

여러 가지 치환기를 가지는 망간 포피린착물을 촉매로 사용하여 CH$_2$Cl$_2$ 용매하에서 styrene과 NaOCl간의 반응에 대한 수율을 구하였다. ortho 위치에 치환기를 가지는 망간 포피린 착물과 전자받게성의 치환기를 가지는 망간 포피린착물일 때 반응속도와 에폭사이드에 대한 선택성이 증가했다. 또한 망간 포피린착물에 축상 리간드로서 이미다졸을 도입할 때 반응속도와 에폭사이드에 대한 선택성이 증가했다. Michealis-Menten식을 이용한 반응속도론적 연구에 의하면 착물의 촉매능에 더 큰 영향을 주는 요소는 $K_m$ 임을 알았다. $K_m$ 값이 작을수록 더 큰 결합친화도를 가진다. 이론적인 연구로 EHMO계산에 의해 나온 결과와 실험에 의해 나온 결과는 좋은 일치를 보여주었다.

• Korean Membrane Journal
• /
• 제1권1호
• /
• pp.1-7
• /
• 1999

Pd-ceramic composite membranes and catalytic membrane reactors(CMR) have been studied for hydrogen and its isotopes (deuterium and tritium) purification and recovery in the fusion reactor fuel cycle. Particularly a closed-loop process has been studied for recovering tritium from tritiated water by means of a CMR in which the water gas shift reaction takes place. The development of the techniques for coating micro-porous ceramic tubes with Pd and Pd/Ag thin layers is described : P composite membranes have been produced by electroless deposition (Pd/Ag film of 10-20 $\mu$m) and rolling of thin metal sheets (Pd and Pd/Ag membranes of 50-70 $\mu$m). Experimental results of the electroless membranes have shown a not complete hydrogen selectivity because of the presence of some defects(micro-holes) in the metallic thin layer. Conversely the rolled thin Pd and Pd/ag membranes have separated hydrogen from the other gases with a complete selectivity giving rise to a slightly larger (about a factor 1.7) mass transfer resistance with respect to the electroless membranes. Experimental tests have confirmed the good performances of the rolled membranes in terms of chemical stability over several weeks of operation. Therefore these rolled membranes and CMR are adequate for applications in the fusion reactor fuel cycle as well as in the industrial processes where high pure hydrogen is required (i.e. hydrocarbon reforming for fuel cell)

• Molecules and Cells
• /
• 제20권1호
• /
• pp.1-16
• /
• 2005

The peptidyl transferase center (PTC) is located in a protein free environment, thus confirming that the ribosome is a ribozyme. This arched void has dimensions suitable for accommodating the 3'ends of the A-and the P-site tRNAs, and is situated within a universal sizable symmetry-related region that connects all ribosomal functional centers involved in amino-acid polymerization. The linkage between the elaborate PTC architecture and the A-site tRNA position revealed that the A-to P-site passage of the tRNA 3'end is performed by a rotatory motion, which leads to stereochemistry suitable for peptide bond formation and for substrate mediated catalysis, thus suggesting that the PTC evolved by genefusion. Adjacent to the PTC is the entrance of the protein exit tunnel, shown to play active roles in sequence-specific gating of nascent chains and in responding to cellular signals. This tunnel also provides a site that may be exploited for local co-translational folding and seems to assist in nascent chain trafficking into the hydrophobic space formed by the first bacterial chaperone, the trigger factor. Many antibiotics target ribosomes. Although the ribosome is highly conserved, subtle sequence and/or conformational variations enable drug selectivity, thus facilitating clinical usage. Comparisons of high-resolution structures of complexes of antibiotics bound to ribosomes from eubacteria resembling pathogens, to an archaeon that shares properties with eukaryotes and to its mutant that allows antibiotics binding, demonstrated the unambiguous difference between mere binding and therapeutical effectiveness. The observed variability in antibiotics inhibitory modes, accompanied by the elucidation of the structural basis to antibiotics mechanism justifies expectations for structural based improved properties of existing compounds as well as for the development of novel drugs.

• International Journal of Control, Automation, and Systems
• /
• 제6권5호
• /
• pp.767-775
• /
• 2008

Methods used for exploring marine resources and spaces include positioning a probe under water and then recalling it after a specified time. Hydro-acoustic Releasers are commonly used for positioning and retrieving of such exploration equipment. The most important factor in this kind of system is the reliability for recalling the instruments. The frequently used ultrasonic signal detection method can detect ultrasonic signals using a fixed comparator, but because of increased rates of errors due to outside interferences, information is repetitively acquired. This study presents an effective ultrasonic signal detection algorithm using the characteristics of a resonance and adaptive comparator Combined with the FSK+ASK modulator. As a result, approximately 8.8% of ultrasonic wave communication errors caused by background noise and transmission losses were reduced for effectively detecting ultrasonic waves. Furthermore, the resonance circuit's quality factor was enhanced (Q = 120 to 160). As such, the bias voltage of the transistor (Vb= 3.3 to 6.8V) was increased thereby enhancing the frequency's selectivity.

• Korean Chemical Engineering Research
• /
• 제40권6호
• /
• pp.687-693
• /
• 2002

폴리이써설폰 막(polyethersulfone membrane, PES)을 Ar, $NH_3$ 플라즈마로 표면 처리하고, 처리 전후의 변화를 관찰하였다. Ar 플라즈마로 처리하였을 때 O/C의 비율이 증가하며 친수성기의 도입이 확인되었고 $NH_3$ 플라즈마로 처리하였을 때 아민, 아미노기가 도입되었다. 또한 폴리이써설폰 막의 흡습성이 유지될 경우, 플라즈마 처리에 의해 표면에 형성된 극성 작용기들과 $CO_2$와의 내부반응이 증가하였다. 이로 인해 $N_2$에 비하여 $CO_2$의 용해 선택성이 증가하였고 투과도와 선택도가 동시에 향상되는 효과를 나타내었다. 플라즈마 처리된 폴리이써설폰 막에서 $CO_2$의 투과도와 ${\gamma}$(actual separation factor)에 대한 최적조건은 Ar 플라즈마 처리의 경우 10 W-2 min에서 각각 $13.19{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$와 20.12이며, $NH_3$ 플라즈마 처리의 경우 50 W-2 min에서 $15.40{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$와 20.06를 얻었다.

• 한국진공학회지
• /
• 제15권6호
• /
• pp.630-636
• /
• 2006

플래시 메모리 반도체의 고집적화와 고밀도화가 진행함에 따라 플래시 메모리의 트랜지스터 안 선폭을 중심으로 게이트 패턴의 미세화가 진행 중이다. 최근 100 nm 이하의 선폭을 구현하기 위해서 ONO(oxide-nitride-oxide)를 사용하기 위한 연구가 개발 중이고, 이러한 100 nm이하의 미세 선폭으로 갈수록 식각 속도와 식각의 프로파일은 중요한 요인으로 작용하고 있다. ICP 식각 장비를 이용하여, power를 50 W 증가 하였을 때, 각각 식각 속도와 포토레지스트와의 선택비를 확인 한 결과 platen power를 100 W로 올렸을 경우 가장 좋은 결과를 나타내었다. 100 W에서 HBr가스의 유량에 변화를 주었을 경우 가스의 양을 증가 할수록 식각 속도는 감소하였지만, 포토레지스트와의 선택비는 증가함을 보였다. 유도결합 플라즈마 식각 장비를 가지고 platen power를 100 W, HBr gas를 35 sccm 공급하여 하부 층에 노치가 형성이 안되고, 식각 속도 320 nm/min, 감광액과의 선택비 3.5:1, 측면식각 프로파일이 수직인 공정 조건을 찾았다.

• 수산해양기술연구
• /
• 제40권1호
• /
• pp.86-94
• /
• 2004

새우조망 끝자루의 망목선택성을 조사하기 위한 시험조업은 여수 거문도 주변해역에서 2002년 10월 중에 끝자루의 망목을 28, 38, 51 그리고 61mm로 구성하여 덮그물 방식으로 각각 5 회씩, 총 20회 거문도 주변해역에서 실시하였다. 주 어획대상 어종인 수염대롱새우의 끝자루 망목별 어획률과 망목선택성 곡선 S=1/(1+exp$^{-{\alpha}CL+{\beta}})$)의 기울기 (a)와 절편 (b) 및 선택계수 그리고 표본망목선택성곡선 S=1/(1+exp$(^{-{\alpha}(CL/M)+{\beta}}))$)의 기울기(a)와 절편 (b) 및 적정망목을 추정한 결과는 다음과 같다. 1. 시험조업 결과 어획미수는 끝자루 11,504마리, 덮그물 12,879마리로 총 24,374마리, 313.1kg이 어획되었고 종별구성은 새우류, 어류, 게류, 연체동물 순이었으며, 부수 어획물은 어류의 자치어가 대부분을 차지하였다. 2. 끝자루 망목 28.0, 38.0, 51.0, 61.0 mm에 어획되는 대롱수염새우의 어획률은 각각 0.72, 0.63, 0.46, 0.29로 나타났다. 3. 끝자루 망목 28.0, 38.0, 51.0, 61.0 mm에 대한 선택성곡선의 a와 b 값은 0.53 -12.65, 0.35 -9.40, 0.28 -8.97과 0.24 -8.27이었고, 선택계수는 0.85, 0.71, 0.62, 0.55이었다. 4. 표본망목선택성곡선의 기울기(${\alpha}$)와 절편(${\beta}$) 값 은 8.44, -5.49이었고, 대롱수염새우의 최소성숙갑각장 20.6 mm에 대한 적정망목은 30.7 mm, 상품(上品) 최소갑각장 25 mm에 대한 적장망목은 38.5 mm로 나타났다.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.172-181
• /
• 1994

The mesh selectivity of diamond and suare mesh cod-ends at the Southern Korean Sea and the East China Sea were compared for Pampus argenteus, Trachurus japonicus, Trichiurus lepturus. Selection trials were carried out using diamond and square mesh cod-end by trouser type cod-end with cover net. of which the mesh cod-end has four types : A(51.2mm), B(70.2mm), C(77.6mm), D(88.0mm). Selection curves and selection parameters were calculated using a logistic model. The results obained are summarized as follows : 1. Harvest fish : In B. C and D type selection range and fifty percent selection length of the square mesh were about 21mm, 11mm : 12mm, 18mm and 34mm, 5mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 1.54 and for the square mesh was 1.68. The optimum mesh size for the diamond mesh was 97.4mm and for the square mesh was 89.3mm, the difference was 8.1mm. 2. Horse mackerel : In A type, selection range was nearly the same for the diamond and the square mesh, but fifty percent selection length of the square mesh was 43mm higher than the diamond mesh. In B. C and D type, selection range and fifty percent selection length of the square mesh were about 6mm, 3mm : 24mm, 21mm and 11mm, 42mm higher than those of the diamond mesh, respectively. Selection factor of master curve for the diamond mesh was 2.37, for the square mesh was 2.77. The optimum mesh size for the diamond mesh was 78.1mm and for the square mesh was 66.8mm, the difference was 11.3mm. 3. Hair tail : In A, B and C type, selection range of the square mesh was about 34mm, 8mm, 60mm higher than those of the diamond mesh. Fifty percent selection length for the diamond mesh was about 5mm, 7mm, 8mm higher than that of the square mesh. Selection factor of master curve for the diamond mesh was 3.11, for the square mesh was 3.48. The optimum mesh size for the diamond mesh was 64.3mm and for the square mesh was 57.5mm, the difference was 6.8mm.