• Title/Summary/Keyword: Selective reduction

Search Result 768, Processing Time 0.026 seconds

Performance Prediction of SCR-DeNOx System for Reduction of Diesel Engine NOx Emission (디젤엔진의 NOx 저감을 위한 SCR-DeNOx 후처리 시스템 성능 예측)

  • 김만영
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.11 no.3
    • /
    • pp.71-76
    • /
    • 2003
  • A numerical simulation of selective catalytic reduction (SCR) for NO with $NH_3$ is conducted over the $V_2O_5/TiO_2$ and $WO_3-V_2O_5/TiO_2$ catalysts. The governing $NH_3$ and NO transport equations are considered by using the time-dependent FCT (Flux-Corrected Transport) algorithm. After a validating simulation for $NH_3$ step feed and shut-off experiments is analyzed, transient behavior of $NH_3$ and NO concentration in a SCR catalyst is investigated by changing such parameters as inflow $NH_3$ concentration, temperature of the catalyst, and $NH_3$/NOx ratios.

Control of SCR System for NOx Reduction in a Refuse Incineration Plant Using Repetitive Control Method (반복제어법을 이용한 소각장 NOx 저감용 SCR 시스템의 제어)

  • 김인규;여태경;김환성;김상봉
    • Transactions of the Korean Society of Mechanical Engineers A
    • /
    • v.24 no.11
    • /
    • pp.2762-2770
    • /
    • 2000
  • The refuse incineration plant has an important role in saving the combustion energy for local heating system. But harmful combustion gas(NOx etc.) leads to some serious environmental problem. To reduce the gas, a SCR(Selective Catalytic Reduction)system is installed and it is controlled by adjusting the flow of ammonia gas(NH3) . In this paper, we apply a repetitive control method to reduce NOx by adjusting the flow of ammonia gas for SCR system in a refuse incineration plant which is located in Haeundae, Pusan, Firstly, we analyze the inlet NOx period by FFt method, and verify its periodic variations. Secondly, we design a repetitive control system by using state space model method. Lastly, the effectiveness of repetitive control system is shown by comparing to a conventional PID control in simulation and experimental results.

Selective Reduction of Carbonyl Compounds with Al-Alkoxydiisobutylalanes

  • 차진순;권오운;김종미;전중현;이영수;이형수;조성동
    • Bulletin of the Korean Chemical Society
    • /
    • v.19 no.2
    • /
    • pp.236-242
    • /
    • 1998
  • Reaction of carbonyl compounds with Al-alkoxydiisobutylalane (DIBAOR, R=H, Et, i-Pr, t-Bu) has been investigated in detail so as to establish their usefulness as selective reducing agents in organic synthesis. The reagents appear to be extremely mild and can reduce only aldehydes and ketones effectively under mild conditions. All the other common organic functional groups are not affected by these reagents. The reagents can also reduce α,β-unsaturated aldehydes and ketones to the corresponding allylic alcohols without any detectable 1,4-reduction. Furthermore, the reagents show a highly chemoselective discrimination between aldehyde and ketone, between aldehydes, and between ketones. Even more remarkable is the stereoselective reduction of cyclic ketones to the thermodynamically more stable alcohol epimers.

Selective Reduction of Carbonyl Group with Borohydride Exchang Resin (BER)-LiCl System

  • Gyoung, Young-Soo;Yoon, Nung-Min;Jeon, Dae-Hoon
    • Bulletin of the Korean Chemical Society
    • /
    • v.8 no.3
    • /
    • pp.162-165
    • /
    • 1987
  • The reduction rate of borohydride exchange resin (BER) was greatly enhanced in the presence of lithium salts. Thus 2-heptanone was reduced completely with BER-LiCl in 1 h at room temperature. However, no reduction was observed with BER alone under the same conditions. With this system, organic compounds containing various fuctional groups were examined in ethanol at room temperature. This study revealed that BER-LiCl system exhibits an excellent chemoselectivity for carbonyl group in the presence of other functional groups. Keto esters and epoxy ketones were reduced with BER-LiCl to give the corresponding hydroxy esters and epoxy alcohols with excellent yields. Selective reductions of carbonyl groups were also possible in the presence of other organic compounds containing functional groups such as 1-idooctane, 1-bromooctane, caproamide, hexanenitrile, nitrobenzene, n-butyl disulfide, dimethyl sulfoxide and 1-dodecene.

Computational Fluid Dynamics(CFD) Simulation and in situ Experimental Validation for the Urea-Based Selective Non-Catalytic Reduction(SNCR) Process in a Municipal Incinerator (생활폐기물 소각장 2차 연소로에서 요소용액을 이용한 선택적무촉매환원 공정에 대한 전산유체역학 모사 및 현장 검증)

  • Kang, Tae-Ho;Nguyen, Thanh D.B.;Lim, Young-Il;Kim, Seong-Joon;Eom, Won-Hyeon;Yoo, Kyung-Seun
    • Korean Chemical Engineering Research
    • /
    • v.47 no.5
    • /
    • pp.630-638
    • /
    • 2009
  • A computational fluid dynamics(CFD) model is developed and validated with on-site experiments for a urea-based SNCR(selective non-catalytic reduction) process to reduce the nitrogen oxides($NO_x$) in a municipal incinerator. The three-dimensional turbulent reacting flow CFD model having a seven global reaction mechanism under the condition of low CO concentration and 12% excess air and droplet evaporation is used for fluid dynamics simulation of the SNCR process installed in the incinerator. In this SNCR process, urea solution and atomizing air were injected into the secondary combustor, using one front nozzle and two side nozzles. The exit temperature($980^{\circ}C$) of simulation has the same value as in situ experiment one. The $NO_x$ reduction efficiencies of 57% and 59% are obtained from the experiment and CFD simulation, respectively at NSR=1.8(normalized stoichiometric ratio) for the equal flow rate ratio from the three nozzles. It is observed in the CFD simulations with varying the flowrate ratio of the three nozzles that the injection of a two times larger front nozzle flowrate than the side nozzle flowrate produces 8% higher $NO_x$ reduction efficiency than the injection of the equal ratio flowrate in each nozzle.

Selective Reduction on Halides with Lithium Borohydride in the Multifunctional Compounds (수소화 붕소리튬을 이용한 다중작용기를 가진 화합물에서 할라이드의 선택환원)

  • Byung Tae Cho;Nung Min Yoon
    • Journal of the Korean Chemical Society
    • /
    • v.27 no.1
    • /
    • pp.46-52
    • /
    • 1983
  • Selective reduction of halide (Br, I) with lithium borohydride in halogen compounds containing chloro, nitro, ester and nitrile groups was achieved satisfactorily. 1-Bromo-4-chlorobutane was reduced to 1-chlorobutane in 96% yield and the reduction of p-nitrobenzyl bromide gave p-nitrotoluene in 98% yield. However, the selectivity on the reduction of ethyl 3-iodopropionate and 4-bromobutyronitrile required the presence of equimolar pyridine to give good yield of ethyl propionate (93%) and n-butyronitrile (88%), respectively. In competitive reduction of 1-bromoheptane and 2-bromoheptane, lithium borohydride reduced 1-bromoheptane preferentially in the molar ratio of 93:7.

  • PDF

Reaction of Potassium 2-Thexyl-1,3,2-dioxaborinane Hydride with Selected Organic Compounds Containing Representative Functional Groups

  • Jin Soon Cha;Sung Eun Lee
    • Bulletin of the Korean Chemical Society
    • /
    • v.13 no.5
    • /
    • pp.531-537
    • /
    • 1992
  • The approximate rates and stoichiometry of the reaction of excess potassium 2-thexyl-1,3,2-dioxaborinane hydride(KTDBNH) with 55 selected compounds containing representative functional groups under standardized conditions (tetrahydrofuran, TEX>$0^{\circ}C$, reagent : compound=4 : 1) was examined in order to define the characteristics of the reagent for selective reductions. Benzyl alcohol and phenol evolve hydrogen immediately. However, primary, secondary and tertiary alcohols evolve hydrogen slowly, and the rate of hydrogen evolution is in order of $1^{\circ}$> $2^{\circ}$> $3^{\circ}$. n-Hexylamine is inert toward the reagent, whereas the thiols examined evolve hydrogen rapidly. Aldehydes and ketones are reduced rapidly and quantitatively to give the corresponding alcohols. Cinnamaldehyde is rapidly reduced to cinnamyl alcohol, and further reduction is slow under these conditions. The reaction with p-benzoquinone dose not show a clean reduction, but anthraquinone is cleanly reduced to 9,10-dihydro-9,10-anthracenediol. Carboxylic acids liberate hydrogen immediately, further reduction is very slow. Cyclic anhydrides slowly consume 2 equiv of hydride, corresponding to reduction to the caboxylic acid and alcohol stages. Acid chlorides, esters, and lactones are rapidly and quantitatively reduced to the corresponding carbinols. Epoxides consume 1 equiv hydride slowly. Primary amides evolve 1 equiv of hydrogen readily, but further reduction is slow. Tertiary amides are also reduced slowly. Both aliphatic and aromatic nitriles consume 1 equiv of hydride rapidly, but further hydride uptake is slow. Analysis of the reaction mixture with 2,4-dinitrophenylhydrazine yields 64% of caproaldehyde and 87% of benzaldehyde, respectively. 1-Nitropropane utilizes 2 equiv of hydride, one for hydrogen evolution and the other for reduction. Other nitrogen compounds examined are also reduced slowly. Cyclohexanone oxime undergoes slow reduction to N-cyclohexylhydroxyamine. Pyridine ring is slowly attacked. Disulfides examined are reduced readily to the correponding thiols with rapid evolution of 1 equiv hydrogen. Dimethyl sulfoxide is reduced slowly to dimethyl sulfide, whereas the reduction of diphenyl sulfone is very slow. Sulfonic acids only liberate hydrogen quantitatively without any reduction. Finally, cyclohexyl tosylate is inert to this reagent. Consequently, potassium 2-thexyl-1,3,2-dioxaborinane hydride, a monoalkyldialkoxyborohydride, shows a unique reducing characteristics. The reducing power of this reagent exists somewhere between trialkylborohydrides and trialkoxyborohydride. Therefore, the reagent should find a useful application in organic synthesis, especially in the field of selective reduction.