• Journal of Mechanical Science and Technology
• /
• 제20권1호
• /
• pp.1-12
• /
• 2006

This work reviews the effects of catalyst formulation and exhaust gas composition on soot oxidation in CDPF (Catalytic Diesel Particulate Filter). DOC's (Diesel Oxidation Catalysts) have been loaded with Pt catalyst (Pt/$Al_{2}O_3$) for reduction of HC and CO. Recent CDPF's are coated with the Pt catalyst as well as additives like Mo, V, Ce, Co, Fe, La, Au, or Zr for the promotion of soot oxidation. Alkali (K, Na, Cs, Li) doping of metal catalyst tends to increase the activity of the catalysts in soot combustion. Effects of coexistence components are very important in the catalytic reaction of the soot. The soot oxidation rate of a few catalysts are improved by water vapor and NOx in the ambient. There are only a few reports available on the mechanism of the PM (particulate matter) oxidation on the catalysts. The mechanism of PM oxidation in the catalytic systems that meet new emission regulations of diesel engines has yet to be investigated. Future research will focus on catalysts that can not only oxidize PM at low temperature, but also reduce NOx, continuously self-cleaning diesel particulate filters, and selective catalysts for NOx reduction.

• 공업화학
• /
• 제32권6호
• /
• pp.695-699
• /
• 2021

본 연구에서는, 노후된 엔진을 사용하는 트럭 및 특수차량에서 배출되는 NO_x 및 PM을 동시에 제거하기 위해 SDPF 후처리 시스템 연구를 수행하였다. 우선, SDPF의 SCR 촉매를 선정하기 위해서, V/TiO₂와 Cu-zeolite 촉매의 de-NO_x 성능을 비교하였으며, SCR 촉매특성분석은 BET, XRD 및 NH₃-TPD를 통해 분석하였다. 촉매 활성시험 결과, Cu-zeolite 촉매가 가장 우수한 내열성을 보여주었다. 최적의 SDPF 코팅을 위해서, 목표로 설정된 입자 크기에 맞추어 슬러리를 제조하였다. SCR 코팅량에 따른 SDPF의 코팅안정성과 배압 결과, SDPF 촉매를 로딩량별로 A, B, C 샘플을 제작하여 코팅안정성과 배압 및 de-NOx 성능을 비교한 결과 B 샘플에서에서 가장 우수한 결과를 보였다. 최적 SDPF 후처리시스템에 대해 엔진동력계 시험을 실시하였으며, 시험결과 Eu-5 규제를 만족하였다.

• 한국연소학회지
• /
• 제12권3호
• /
• pp.16-23
• /
• 2007

Employing an after-treatment system has almost become a mandatory requirement for Diesel vehicles, which results from a reinforced exhaust regulations as the number of vehicles powered by a Diesel engine increases. The Diesel Particulate Filter (DPF) system is considered as one of the most efficient method to reduce particulate matter (PM); however, the improvement of a regeneration performance at any engine operation point presents a considerable challenge by itself. Temperature, gas composition and flow rate of exhaust gas are important parameters in DPF evaluation processes, especially during a regeneration process. Engine dynamometer and segment tester are generally used in DPF evaluation so far. These test methods, however, could not completely evaluate the effect of various parameters on real DPF, such as oxygen concentration, amount of soot and exhaust gas temperatures. The evaluation of DPF systems using a dump combustor has been verified experimentally and this dump combustor system is likely to be appropriate for the DOC (Diesel Oxidation Catalyst) and SCR (Selective Catalytic Reduction) assessments test, too.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2007년도 제34회 KOSCO SYMPOSIUM 논문집
• /
• pp.98-103
• /
• 2007

The number of vehicles employing diesel engines is rapidly rising. Accompanying this trend, application of an after-treatment system is strictly required as a result of reinforced exhaust regulations. The Diesel Particulate Filter (DPF) system is considered as the most efficient method to reduce particulate matter (PM), but the improvement of a regeneration performance at any engine operation point presents a considerable challenge by itself. Temperature, gas compostion and flow rate of exhaust gas are important parameters in DPF evaluation, especially regeneration process. Engine dynamometer and degment tester are generally used in DPF evaluation so far. But these test method couldn't reveal the effect of various parameters on real DPF, such as O2 concentration, amount of soot and exhaust gas temperature. This research has studied the possibility using dump combustor that used to take an approach lean premixed combustion in gas turbine for a DPF power and optimized. It is possible that utilize the system as DOC (Diesel Oxidation Catalyst) and SCR(Selective Catalytic Reduction) assessments test as well as DPF evaluation

• 해양환경안전학회지
• /
• 제29권5호
• /
• pp.497-504
• /
• 2023

본 연구에서는 소형선박용 중·고속 디젤엔진에 적용하여 연구 중인 SCR+DPF 기술을 저속엔진이 설치된 선박에 탑재하여 해상 실증 시험을 수행하였다. 대상 선박(총 톤수 2,881 톤, 정격출력 1,470kW@240rpm ×1)은 국내 연해를 운항하는 일반화물선으로 배출저감설비의 선박 탑재를 위해 도면 개발, 승인 및 선박 임시검사를 수행하였다. 저감성능 확인을 위해서 가스상물질 측정장비는 NOx technical code 및 ISO-8178의 분석방법을 준용하는 장비를 사용하였으며, 입자상물질 측정장비는 국제해사기구(IMO)에서 논의하고 있는 블랙카본 측정 방법 중 하나인 스모크미터를 사용하였다. 시험은 황 함유량 따라 MGO(0.043%), LSFO(0.42%) 2종의 연료를 사용하였으며 실제 운항하는 엔진회전수(130, 160 및 180 rpm)를 고려하여 시험 조건을 설정하였다. 시험 조건에 따라 배출저감설비의 전·후단에서 가스상 및 입자상(매연) 물질을 측정하여 배출저감설비의 저감효율을 확인하였으며 모든 시험 조건에서 NOx의 경우 90% 이상, 입자상물질(매연)의 경우 95% 이상의 저감효율을 확인하였고 엔진 성능의 영향을 줄 수 있는 배기가스 압력은 허용배압 기준인 50mbar 이하를 만족하였다. 본 연구를 통해 해상실증 연구의 중요성과 중소형 저속엔진 선박의 질소산화물 및 입자상물질의 동시 저감을 위한 대응 기술로 SCR+DPF 설비 적용 가능성을 확인할 수 있었다.

• 한국자동차공학회논문집
• /
• 제24권2호
• /
• pp.152-160
• /
• 2016

The market demand for diesel engine tends to increase in general passenger cars as well as commercial vehicles because of its advantages. However, to meet the vehicle emissions regulation which will be more stringent in the future, it is necessary to plurally apply all after-treatment technologies such as diesel oxidation catalyst (DOC), catalyzed diesel particulate filter (CDPF), lean NOx trap (LNT) and selective catalytic reduction (SCR), and so on. Accordingly, the exhaust after-treatment system for diesel vehicle requires the technology of minimizing the numbers of catalysts by integrating every individual catalysts. The purposes of this study is to develop hybrid exhaust after-treatment device system which simultaneously uses LNT/DPF and SCR/DPF catalyst concurrently reducing NOx and particulate matter (PM). As the results, the hybrid system with $NH_3$ generated at LNT/DPF working as a reducing agent of SCR/DPF catalyst, improving NOx conversion rate, was found to be more excellent in de-NOx performance than that in LNT/DPF alone system.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.27-35
• /
• 2013

SCR (Selective Catalytic Reduction) on DPF (Diesel Particulate Filter) is a multi-functional after-treatment device which integrates soot filtration and DeNOx function into a single can. Because of its advantage in package and cost, the SCR on DPF is considered as a potential candidate for future application. It inherently employes wall flow type monolithic reactor so ash included in exhaust gas may deposit inside the inlet channel of this device. This study is intended to identify the impact of ash deposit on SCR reaction under wall flow type monolithic reactor. Simulation approach is used so relevant species transport equations for wall flow type monolith is derived. These equations can be solved together with momentum conservation equations and give solution for conversion performance. Both ash deposit and clean catalyst case are simulated and comparison of these two cases gives an insight for the impact of ash deposit on conversion performance. Ash deposit can be classified as ash layer and ash plug. and impact of ash deposit is described along with different morphology of ash deposit.

• 해양환경안전학회지
• /
• 제28권6호
• /
• pp.1092-1099
• /
• 2022

대기오염물질과 온실가스 배출량을 저감 시키기 위한 배기 후처리 장치에 대한 연구는 활발히 진행 중이지만 그 중 선박용 입자상물질/질소산화물(PM/NOx) 동시저감 장치에서는 엔진에 미치는 배압 및 필터 담체 교체에 대한 문제가 발생하고 있다. 본 연구에서는 PM/NOx를 동시저감 할 수 있는 일체형 장치의 최적 설계를 위해 장치 내부 유동과 입·출구 압력을 통한 배압의 변화를 연구하여 적절한 기준을 제시하였다. Ansys Fluent를 활용하여 디젤미립자필터(DPF) 및 선택적촉매환원법(SCR)에 다공성 매체 조건을 적용하였고 공극률은 30 %, 40 %, 50 %, 60 % 및 70 %로 설정하였다. 또한, 엔진 부하에 따른 Inlet 속도를 경계 조건으로 7.4 m/s, 10.3 m/s, 13.1 m/s 및 26.2 m/s로 적용하여 배압에 미치는 영향을 분석하였다. CFD 분석 결과, 장치의 입구 온도 보다 입구 속도에 따른 배압의 변화율이 크고 최대 변화율은 27.4 mbar였다. 그리고 모든 경계 조건에서의 배압이 선급 기준인 68 mbar를 초과하지 않았기 때문에 1800 kW 선박에 적합한 장치로 평가되었다.