• Journal of information and communication convergence engineering
• /
• v.2 no.3
• /
• pp.139-144
• /
• 2004

In order to transmit various types of multimedia data (i.e. voice, video, and data) over a wireless channel, the coding and modulation scheme needs to be flexible and capable of providing a variable quality of service, data rates, and latency. In this paper, we study a mobile multimedia COMA network combined with the concatenated Reed-Solomon/Rate Compatible Punctured Convolution code (RS/RCPC). Also, this paper propose the combination of concatenated RS/RCPC coder and COMA RAKE receiver for multimedia COMA traffic which can be sent over wireless channels. From the results, using a frequency selective Rayleigh fading channel model, it is shown that concatenated RS/RCPC coder at the wireless physical layer can be effective in providing reliable wireless multimedia CDMA network. And the proposed scheme that combine concatenated RS/RCPC coder and CDMA RAKE receiver provides a significant gain in the BER performance over multi-user interference and multipath frequency selective fading channels.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.518-523
• /
• 2012

This paper presents new coherent and non-coherent detection methods for the IEEE 802.15.4a low-rate ultra-wideband physical layer with forward error correction (FEC) coding techniques. The coherent detection method involving channel estimation is based on the correlation characteristics of the preamble signal. A coherent receiver uses novel iterated selective-rake (IT-SRAKE) to detect 2-bit data in a non-line-of-sight channel. The non-coherent detection method that does not involve channel estimation employs a 2-bit data detection scheme using modified transmitted reference pulse cluster (M-TRPC) methods. To compare the two schemes, we have designed an IT-SRAKE receiver and a MTRPC receiver using an IEEE 802.15.4a physical layer. Simulation results show the performance of IT-SRAKE is better than that of the M-TRPC by 3-9 dB.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.179-184
• /
• 2010

In this paper, we analyze and simulate the performance of RAKE receiver for ultra wide band (UWB) systems in indoor multipath radio channel. Pulse position modulation-time hopping (PPM-TH) signal is considered. And we also consider three types of RAKE receivers, which are ideal RAKE, selective RAKE, and partial RAKE receivers. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.253-256
• /
• 2008

In this paper, we analyze the performance of RAKE receiver for impulse radio-ultra wide band (IR-UWB) systems in indoor multipath radio channel. Pulse position modulation-time hopping (PPM-TH) signal is considered. And we also consider three types of RAKE receivers, which are ideal RAKE, selective RAKE, and partial RAKE receivers. The indoor channel is modeled as the modified Saleh and Valenzuela (SV) model which has been proposed as a UWB channel model by the IEEE group, IEEE 802.15.SG3a.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.37-46
• /
• 1996

In this paper, we analyzed the performance improvement of the DS-CDMA/dPSK cellular mobile communication system with CCI canceller and RAKE receiver techniques in mobile radio channel which is characterized by AWGN, Multi-user interference (mUI) and frequency-selective rayleigh fading. System capacity i.e., number of user per cell has been derived and the evaluated results are shown in figuraes as a function of PN code sequence length, number of RAKE receiver tap, BER and E$_{b}$/N$_{o}$. The voice activity factor is assumed to be 3/8 the number of sectors in a cell 3 and MUI is modeled as gaussian process. From the results, the capacity of the DS-CDMA/DPSK cellular mobile communication system is improved by adopting CCI canceller. When we adopt the RAKE receiver to mitigate the multipath fading, the error performance is improved and the amount of improvement is proportional ot the number of taps L in the case that each tap contains a signal component and the better of improvement can be obtained, the smaller of the SNR difference in each tap. The system capacity is more increased when the CCI canceller and the RAKE receiver is used in cascade.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.4B
• /
• pp.635-639
• /
• 2000

The average bit error rate (BER) performance of 2D-RAKE receiver, operating in a correlated Nakagami fading channel, is analyzed. The analysis assumes correlated fading between the array elements with identical fading parameters but with unbalanced average signal-to-noise ratio (SNR). And independent but non-identically distributed frequency-selective fading channel with different fading parameters is assumed. The analyses show that fading correlation, delay profile, average SNR distribution, and fading parameters of combined branches affect the overall performance of 2D-RAKE receiver.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.501-509
• /
• 2012

This paper proposes a joint timing synchronization, channel estimation, and data detection for the impulse radio ultra-wideband systems. The proposed timing synchronizer consists of coarse and fine timing estimation. The synchronizer discovers synchronization points in two stages and performs adaptive threshold based on the maximum pulse averaging and maximum (MAX-PA) method for more precise synchronization. Then, iterative channel estimation is performed based on the discovered synchronization points, and data are detected using the selective rake (S-RAKE) detector employing maximal ratio combining. The proposed synchronizer produces two signals-the start signal for channel estimation and the start signal for start frame delimiter (SFD) detection that detects the packet synchronization signal. With the proposed synchronization, channel estimation, and SFD detection, an S-RAKE receiver with binary pulse position modulation binary phase-shift keying modulation was constructed. In addition, an IEEE 802.15.4a channel model was used for performance comparison. The comparison results show that the constructed receiver yields high performance close to perfect synchronization.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.10A
• /
• pp.949-957
• /
• 2005

In this paper, the performances of a single-user DS-UWB system applying two simple proposed channel estimation schemes are introduced, according to the newly updated DS-UWB PHY Layer standard from IEEE P802.15.3a. The performances of error control coding, different combining schemes in selective Rake receiver for DS-UWB system are analyzed. Both of the two channel estimation schemes using data-independent structure work well in DS-UWB system with few pilot bits. For the purpose of channel estimation and reduces the number of pilot bits, we apply a pilot symbol spreaded with $2{^8}-1\;or\;2{^9}-1$ periods of m-sequence for different channel estimation schemes.

• 한국ITS학회:학술대회논문집
• /
• 2003.11a
• /
• pp.153-158
• /
• 2003

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.353-361
• /
• 2000

The performance of a multi-carrier CDMA system is analyzed considering frequency selective multipath fading and Near/Far effects. The number of multicarrier, multiuser, and arms of RAKE receiver, and the decay ratio of frequency selective multipath fading are used as a parameter for the performance analysis. More over, the distribution and the strength of multiuser interference are also considered. To evaluated the Near/Far effects in a multi-carrier CDMA system, three distribution models are assumed. In the first model. interference to carrier Ratio, I/C, ranges form -4 dB to 4dB, and at each 2 dB interval 20 % of multiuser is assumed to be uniformly distributed. In the second one, I/C ranges from -2 dB to 2 dB, and 33.3% of multiuser is assumed to be equally dispersed at each 2dB interval. The third model is 0 dB of I/C, that is, with perfect power control, multiuser are assumed to be evenly located. In this paper, multi-carrier CDMA system adoption RAKE receiver is proposed to mitigate the frequency selective multipath fading. Form the results, the third model(i.e. perfect power control)shows the best performance, and the narrower range of I/C causes the less effects to the desired signal, which reads to the better performance.