• Proceedings of the Korean Society of Developmental Biology Conference
• /
• 2003.10a
• /
• pp.70-70
• /
• 2003

The uterus undergoes dynamic changes during the cycle and displays many features typical of developmental process. In order to be prepared for implantation, endometrium undergoes predictable, sequential phases of proliferation and secretory changes. The uterus during estrus cycle synthesize a complex of signaling molecules with specific spatial and temporal modes of expression and which are critical for cell proliferation and differentiation. The purpose of this investigation was to use cDNA microarrays to evaluate the expression of genes of rat uterus in estrus cycle. Animals were sacrificed on proestrus, estrus, metestrus, diestrus. Differential gene expression profiles were revealed(growth-related c-myc reponsive protein RCL, heat shock 47-kDa protein (HSP47), cytochrome c oxidase polypeptide Vlc2 (COX6C2), calreticulin (CALR)). Reverse transcription polymerase chain reaction (RT-PCR) was used to validate the relative expression pattern. Using this approach, we found several genes whose expression in rat uterus was altered with estrus cycle. Our long-term goal is to determine the role of these differentially expressed genes during estrus cycle. This study was supported by through the Biohealth Products Research Center(BPRC), Inje University.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.294-298
• /
• 2008

The ionic polymer-metal composite actuators with selectively grown multiple electrodes were developed to mimic the swimming locomotion of a fish. The developed method is based on combining electroplating with the electroless chemical reduction using the patterned mask. The advantages of this fabrication method are that the initial compositing between the polymer and platinum particles can be assured by the chemical reduction method, and the thickness of each electrode can be controlled easily and rapidly by electroplating. By using the fabricated actuator with a multiple degree of freedom, the oscillatory wave of the flexible membrane actuator was generated and a twisting motion was also realized to verify the possibility of mimicking the fish-like locomotion. The frequency response function was analyzed to investigate the natural frequency and the damping factor by a mechanical shaker and direct electrical excitation through the swept-sine method. Present results show that this novel method can be a promising technique to easily pattern each of multiple electrodes and to implement the biomimetic motion of the polymer actuators with good mechanical bending performance.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.4
• /
• pp.297-302
• /
• 2004

A chitinase-producing bacterium was isolated from seashore mud around Beobseongpo in Chunmam province through the use of a selective enrichment culture. The best chitinase producing strain was isolated and identified as Serratia marcescens KY from its characteristics. For effective production of chitinase, optimum pH, temperature, and agitation speed were investigated in flask cultures. The optimum pH using Serratia marcescens KY was between pH 6 and 7 and the chitinase produced was 37.9 unit/mL. On the other hand, the optimal pH of the Serratia marcescens ATCC 27117 was 7.5, and the produced amount of chitinase was 35.2 unit/mL. The optimal temperature for chitinase production for Serratia marcescens KY and Serratia marcescens ATCC 27117 was $30^{\circ}$. The cell growth pattern at different temperature was almost identical to the chitinase production. To investigate the optimal shaking speed under optimal culture, speeds were varied in the range of 0∼300 rpm. The maximum production of chitinase was carried at 200 rpm although the cell growth was the highest at 150 rpm. It indicates that oxygen adjustment is required for the maximum chitinase production. Using optimal conditions, batch cultures for comparing Serratia marcescens KY and Serratia marcescens ATCC 27117 were carried out in a 5 L fermentor. The oxygen consumption was increased with the increase of culture. Especially, at 120 h of culture Serratia marcescens KY and Serratia marcescens ATCC 27117 produced 38.3 unit/mL, and 33.5 unit/mL, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.06a
• /
• pp.40-41
• /
• 1996

Nitridation technique has been receiving much attention for the formation of a thin nitrided buffer layer on which high quality nitride films can be formedl. Particularly, gallium nitride (GaN) has been considered as a promising material for blue-and ultraviolet-emitting devices. It can also be used for in situ formed and stable passivation layers for selective growth of $GaAs_2$. In this work, formation of a thin nitrided layer is investigated. Nitrogen electron cyclotron resonance(ECR)-plasma is employed for the formation of thin nitrided layer. The plasma source used in this work is a compact ECR plasma gun3 which is specifically designed to enhance control, and to provide in-situ monitoring of plasma parameters during plasma-assisted processing. Microwave power of 100-200 W was used to excite the plasma which was emitted from an orifice of 25 rnm in diameter. The substrate were positioned 15 em away from the orifice of plasma source. Prior to nitridation is performed, the surface of n-type (001)GaAs was exposed to hydrogen plasma for 20 min at $300{\;}^{\circ}C$ in order to eliminate a native oxide formed on GaAs surface. Change from ring to streak in RHEED pattern can be obtained through the irradiation of hydrogen plasma, indicating a clean surface. Nitridation was carried out for 5-40 min at $RT-600{\;}^{\circ}C$ in a ECR plasma-assisted molecular beam epitaxy system. Typical chamber pressure was $7.5{\times}lO^{-4}$ Torr during the nitridations at $N_2$ flow rate of 10 seem.(omitted)mitted)

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.233-242
• /
• 2010

This study was conducted to know that if ionic liquids can be applicable as control agents of harmful algae in water-ecosystem and to find out problems caused by ionic liquid application. Firstly, the differential selectivity of various fresh-water algal species to several 1-alkyl-3-methylimidazolium chloride ionic liquids was investigated. There was a distinct differential response between alkyl chain lengths from butyl to dodecyl and towards the algal organisms : Generally algicidal activity was increased with increase of chain length and among the algae used in this study, Stephanodiscus hantzschii f. tenuis, Oscillatoria tenuis and Spirulina pratensis were most sensitive to 1-dodecyl-3-methylimidazolium chloride (MAIC12), next was Microcystis aeruginosa, and the others were relatively less sensitive to the chemical. The selectivity degree was about ten to twenty times based on the $EC_{80}$ (Effective concentration required for 80% growth inhibition). Secondly, an activity persistence of ionic liquids was investigated in natural mimic condition (using water bottle containing soil-sediments under the greenhouse condition). At the application of $1.0{\mu}g\;mL^{-1}$ of 1-octyl-3-methylimidazolium chloride (MAIC8), the algal growth did not occur at all until 6 days after treatment(DAT) and observed a only little growth at 9 DAT. But the algae grew rapidly after 9 DAT. So at 20 DAT, total chlorophylls was $264.4{\mu}g\;L^{-1}$ and the growth was inhibited by 58.2% compared to untreatment. On the other hand, MAIC12 also had a similar persistence pattern to MAIC8, showing nearly 5 times more activity than MAIC8. At 20 days after $0.2{\mu}g\;mL^{-1}$ application of MAIC12, that is, total chlorophylls was $251.2{\mu}g\;L^{-1}$ and the growth was inhibited by 55.2% compared to untreatment. In summary, 1-alkyl-3-methylimidazolium chloride ionic liquids is likely to be applicable for selective control of harmful algae as potent compounds having long lasting activity. However, the difficulty of degradation seems to be a limiting factor in an eco-friendly application of the compounds.

• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.271-278
• /
• 2000

We have fabricated and analyzed the lasing characteristics of 1.3$\mu\textrm{m}$ Spot-Size-Converter (SSC) integrated Fabry-Perot (FP) laser diodes, which are very promising light sources for optical subscriber networks. SSC-LDs has been developed by BIB (buttjoint-built-in) coupling and selective MOVPE growth. High-performances were achieved such as the slope efficiency from the SSC facet of 0.23-0.32 mW/mA, the full-width at the half maximum of the far-field pattern (FFP) of 9.5$^{\circ}$~12.3$^{\circ}$, the alignment tolerances of $\pm$2.3$\mu\textrm{m}$ and $\pm$2.5$\mu\textrm{m}$ within the extra-coupling loss of 1 dB for the vertical and parallel directions, respectively. These experimental results were compared to theoretical ones in order to clarify the operational problems and give a good design direction of the fabricated SSC-LDs. It was revealed that an asymmetric output power from the facets, an irrelevancy of FFP and the waveguide structure around SSC facet region, and a poor temperature characteristics were originated from the scattering in the BIB and SSC sections and SHB effect in the active section for the first time.t time.

• Journal of Preventive Medicine and Public Health
• /
• v.27 no.2 s.46
• /
• pp.175-185
• /
• 1994

In order to anticipate disease pattern and health problems of Koreans in the 1st part of 21st century (by the year 2020), transition of population characteristics, mortality and morbidity data during the last 30 years Koreans have experienced were reviewed. On the actual basis of epidemiologic transition process that has undergone during last 30 years since 1960 along with socioeconomic development and successful implementation of selective national health policies (family planning, medical insurance and etc.), following changes can be expected in the 21st century in Korea, under the assumption that the current rate of progress is maintained. The population of South Korea alone will be doubled the population of 1960 by the year 2013 : aged Population older than 65 years will be increased from 3.3% in 1960 to 11.4% in 2020 with increased average age of the population from 23.6 year in 1970 to 39.2 year in 2020; urban population from 28% in 1960 to 83% in 2005. GNP/capita has increased tremendously from U.S. $120 in 1970 to $6,749 in 1992, and the government estimated it would be 519,350 in 2010 and $29,460 in 2020. Growth and developmental indices of children, educational achievement and social status of women also showed a remarkable improvement and anticipated to make futher progress. Leading causes of mortality and morbidity have shown a striking change during the last 30 years, from infectious diseases to chronic degenerative diseases and man-made injuries. Occurrence of communicable diseases may become minimal although viral hepatitis, venereal diseases Including AIDS, and well adapted herpes virus infections will maintain their endemic level. Newly evolving infectious agents, however, should be carefully monitored because of rapidly changing environments and human behaviours. Tuberculosis may increase up to the epidemic level when AIDS prevails. Ischemic heart diseases may increase steadily with increasing occurrence of hypertension and diabetes mellitus whereas cerebrovascular diseases may be decreased slowly. Musculaskeletal diseases which contribute a lot to the disability of aged people may be a major health problems due to increased aged population. Mental diseases, particularly that caused by alcohol and drug abuse, and senile dementia may become a prominent health problem. On the other hand injuries caused by traffic and industrial accidents that have shown most striking increase till now may be decreased considerably by intensive intervention. The health policies in the 21st century will be oriented to the health promotion for good quality life rather than life-savings.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.3
• /
• pp.122-126
• /
• 2003

In this study, $Zn_{0.86}Mn_{0.14}$Te epilayer of 0.7 $\mu\textrm{m}$-thickness was grown on GaAs(100) substrate by using hot wallepitaxy. GaAs(100) substrate was removed from $Zn_{0.86}Mn_{0.14}$Teepilayer by the selective etching solution. The crystal structure and the lattice constant of only Z $n_{0.86}$ M $n_{0.14}$Te epilayer were investigated to be zincblende and 6.140 $\AA$ from X-ray diffraction pattern, respectively. Mn composition x of $Zn_{1-x}Mn_x$Te epilayer was found to be 0.14 using this lattice constant and Vegard's law. The crystal quality of the epilayer was confirmed to be very good due to 256 arcsec-full-width at half-maximum of the double crystal rocking curve. The absorption spectra from the transmission ones were obtained to measure the band gap energy of $Zn_{0.86}Mn_{0.14}$Te epilayer from 300 K to 10 K. With the decreasing temperature,. strong absorption regions in the absorption spectra were shifted to higher energy side and the absorption peak meaning the free exciton formation appeared near the absorption edge. The band gap energy values of $Zn_{0.86}Mn_{0.14}$Te epilayer at 0 K and 300 K were found to be almost 2.4947 eV and 2.330 eV from the temperature dependence of the free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer, respectively. The free exciton peak position energy of $Zn_{0.86}Mn_{0.14}$Te epilayer without GaAs substrate was larger 15.4 meV than photoluminescence peak position energy at 10 K. This energy difference between two peaks was analysed to be Stokes shift.

• Korean Journal of Weed Science
• /
• v.6 no.2
• /
• pp.110-123
• /
• 1986

To know the ecological pattern of bulrush (Scirpus juncoides Roxb.) seeds and overwintreed stumps in germination and sprouting responses as affected by different temperature (7 trt.), light intensity (5 trt.), shading intensity (S trt.), light quality (specturm spectrum; 6 trt.), soil acidity (7 trt.), stump sizea (weight base; 5 trt.), and molding depth (6trt.), respectively, this serial studies were conducted by use of growth chamber, incubator, Wagner pot and petri-dish. Most efficient treatment was obtained from 25-$35^{\circ}C$ temperature, higher light intensity in 2-11 klux range, 95% shading intensity, clear and yellow film for seeds/clear and blue film for stumps, soil pH 5.53, 3-4g stump weight, 0-5% wxygen concentration, 1 ㎝ flooding depth for seeds, and 1-1.5cm molding depth for seeds/0.5-1.0 cm molding depth for stumps, respectively, among others.