• 국제학술발표논문집
• /
• The 4th International Conference on Construction Engineering and Project Management Organized by the University of New South Wales
• /
• pp.209-212
• /
• 2011

Selection of finishing materials in the design stage is an important management factor in terms of use safety and satisfaction, and work cost and process. However, selection of materials in the design stage is usually conducted without related guidelines or a set process, but depends on the experience of the architect or advice of materials company employees. Therefore, the aim of this study was to develop a finishing materials selection process that can be used by a architect. Materials selection related rules collected through interview with experts and five office building cases were used as knowledge. In addition, another aim of the study was to propose a prototype system interface for use in the field.

• 한국실내디자인학회논문집
• /
• 제13권5호
• /
• pp.39-47
• /
• 2004

In modem days when architectural materials have grave impacts on overall design expression, materials for architecture, especially finishing materials have become the most essential elements for the design expression, as architectural space and form have been. This study closely verifies the concept of tensity analyzed in preceding studies by quantifying it through experimentation and questionnaire, and suggests possible alternatives which verified concept of tensity applies into the architectural design. It was examined how architects consider the finishing materials through a questionnaire. With a questionnaire, the possibility of quantificative analysis for tensity is evaluated by SPSS program. Moreover, a questionnaire about the social image that the architectural finishing materials have was also conducted. This questionnaire results In the actual methods to apply quantificated psychological tensity and social images into the architectural design and recommends better plan to select finishing materials for each spacial function and usage, Due to the great influence of social images in design expression, the application mechanism of the tensity should follow the general and individual principles together. With the tensity figure and application of social images we can find more resonable method for material selection.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.953-956
• /
• 2007

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기질에 대한 인식을 새롭게 하고 있다. 또한, 최근의 공동주택의 실내 마감재료에 친환경 소재가 적용되고 있으나 그 가격이 고가이므로 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• 한국건설관리학회논문집
• /
• 제9권4호
• /
• pp.84-91
• /
• 2008

최근 주택성능등급표시제, 친환경건축물인증제도 등 실내공기질에 관련한 제도가 생겨나고 공동주택 거주자 또한 실내공기 질에 대한 인식을 새롭게 하고 있다. 이러한 시대적 흐름에 발맞추어 최근 신축되거나 리모델링 되는 공동주택에는 친환경 실내마감재료가 적용되고 있다. 하지만, 친환경 실내 마감재료는 일반재료에 비해 그 가격이 고가이며, 분양가 상승을 야기한다. 또한 친환경 마감재료 적용으로 인한 분양가 상승은 거주자로 하여금 경제적 부담을 가중시키게 된다. 따라서 실내 마감공법 별로 적용되는 모든 주재료 및 부 재료에 대해서 친환경성과 경제성을 복합적으로 고려할 필요가 있다. 본 논문에서는 노후 공동주택 리모델링 마감공사 시 환경적인 요인, 경제적인 요인을 복합적으로 고려하여 효율적인 실내 마감재료를 선정하는 방안을 제안하고자 한다.

• 한국주거학회논문집
• /
• 제20권1호
• /
• pp.19-26
• /
• 2009

As a response to the recent increase in the Interest in environment friendly interior finishing materials, the purpose of this study is to compare the awareness of environment friendly interior finishing materials between interior designers and housewives, as representatives of two different consumer groups, and to examine how the preferences between them differ. The study participant group for this research consisted of 80 interior designers working in Gwangju, and 166 housewives who were residents of a number of apartments in Gwangju. Self administered questionnaires were provided to the participants and were then collected. Unpaired t-tests and $x^2$ tests were used to compare the prevalence of epidemiological factors and the variables that revealthe awareness and the preference between the two groups. While it was expected that both groups would source information using the internet, the housewives group showed a tendency to also seek advice from others in the selection of environment friendly interior finishing materials. Interior-designers considered the high price and the lack of diverse products as the most serious problems involved in selecting environment friendly interior finishing materials. Interior-designers chose design, color and long-term use, and the method of maintenance as standards by which to choose interior materials in general, while the housewives considered 'environment friendly' as the most important standard. Both groups however favored environment friendly materials. There was no difference between the two groups in terms of their belief in the need to trust a well known brand name and in the importance of a Green-label placed on interior finishing materials such as wallpaper, paint and laminate flooring.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2006년도 하계학술발표대회 논문집
• /
• pp.1174-1179
• /
• 2006

This study aims to reduce the pollutant emission for improving the IAQ by finishing with natural materials. To investigate the concentration of pollutants such as Vocs, HCHO, both the chamber experiment and field measurement were conducted. The results of the study can be summarized as flows. (1) According to the chamber experiment of pollutant-emitting porwer of diatomite materials showed that VOCs and formaldehyde emission rates were lower and satisfied to the most on the HB Grade. (2) The field measurement of pollutant-emitting concentration of clay materials were lower 35% than other materials. (3) The Vocs and formaldehyde were most emitted from furnitures and the emission rate were found to be proportional to indoor air temperature. To control the emitted pollutants efficiently, the reasonable selection of finishing with natural materials are required.

• 한국실내디자인학회논문집
• /
• 제14권2호
• /
• pp.55-62
• /
• 2005

In modern days when architectural materials have grave impacts on overall design expression, materials for architecture, modern architecture into the service facility for business, education, religion, cultural assembly and residence, and evaluates each finishing material mainly used in exterior, lobbies and entrances of the building since the 1970's. When being applied social images into firstly selected materials, the scopes for material selection will be more narrowed down in more practical way. High tensity materials are suitable for public and active space and low tensity are for private and static area. This principle enables us to use architectural materials as one of the important elements which express the whole characteristics of the area.

• 한국건축시공학회지
• /
• 제8권5호
• /
• pp.93-99
• /
• 2008

The environment draws attention in the global community and a growing number of Koreans have interest in improving the quality of life, the importance of house environment has attracted the attention of the public. Against this backdrop, constructors have unveiled environmentally -friendly projects. However, they failed to establish people-oriented environment by being occupied with maximizing profitability through the improvement of brand image and caused sick house syndrome that has recently made controversy. In this regard, the study analyzed the mechanism of discharge of TVOC, one of the sick house syndrome-causing materials, that affects IAQ and its characteristics and examined the effect that granodiorite has on reduction of the discharge of TVOC in order to minimize damage. Experimental sample consisted of interior finishing materials frequently used in ceiling, wall and floor and adhesives used at a time of construction, and the TVOC of building materials was measured through the use of septum bottle unlike In the existing chamber method. Measures to counter the sick house syndrome were suggested by reducing the possible damage from the stage of selection of building material and by figuring out the effect that the granodiorite has on reduction of the discharge of TVOC.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2006년도 춘계학술발표대회 논문집
• /
• pp.264-267
• /
• 2006

The purpose of this study is to examine the advertisements of eco-friendly interior products and finishing materials in 3 interior design magazines which have been published for 4 years since 2002: to identify specific types of the products and materials that consumers can choose and to analyze their special ingredients which have functions and effectiveness related to health. Literature review and content analysis on the advertisements were employed. The results are as follows: The amount of advertisements has been continuously increasing due to the public concerns on well-being and finishing material types absolutely took the greatest proportion (92.8%) among them. Floor coverings, wall papers, and paints are the big 3 materials in the finishing material advertisements. The frequently mentioned health-related ingredients in them were charcoal, natural jade, nanosilver, yellow soil and quartz porphyry, And their main functions were emission of negative ions and ultra infrared. However, it's not easy to find their scientific test results on health. Objective guidelines are needed for the right selection of interior products and materials to maintain healthy interior environment.

• The Journal of Advanced Prosthodontics
• /
• 제11권2호
• /
• pp.81-87
• /
• 2019

PURPOSE. The purpose of this study was to evaluate the effects of various protocols and systems for finishing and polishing monolithic zirconia on surface topography, phase transformation, and bacterial adhesion. MATERIALS AND METHODS. Three hundred monolithic zirconia specimens were fabricated and then treated with three finishing and polishing systems (Jota [JO], Meisinger [ME], and Edenta [ED]) using four surface treatment protocols: coarse finishing alone (C); coarse finishing and medium polishing (CM); coarse finishing and fine polishing (CF); and coarse finishing, medium polishing, and fine polishing (CMF). Surface roughness, crystal phase transformation, and bacterial adhesion were evaluated using atomic force microscopy, X-ray diffraction, and streptococcal biofilm formation assay, respectively. One-way and two-way analysis of variance with Tukey post hoc tests were used to analyze the results (${\alpha}=.05$). RESULTS. In this study, the surface treatment protocols and systems had significant effects on the resulting roughness. The CMF protocol produced the lowest roughness values, followed by CM and CF. Use of the JO system produced the lowest roughness values and the smallest biofilm mass, while the ME system produced the smallest partial transformation ratio. The ED group exhibited the highest roughness values, biofilm mass, and partial transformation ratio. CONCLUSION. Stepwise surface treatment of monolithic zirconia, combined with careful polishing system selection, is essential to obtaining optimal microstructural and biological surface results.