• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.1
• /
• pp.68-76
• /
• 2000

A total of 290 pork loins were selected to include a wide variation of quality to investigate the quality categories into which most pork falls, selection criteria for these categories and methods to objectively assess ultimate pork quality. They were probed at 24 h postmortem (PM) for the following: A) light reflectance by Danish Meat Quality Marbling (MQM), Hennessy Grading Probe (HGP) and Sensoptic Invasive Probe (SIP); B) electrical properties by NWK LT-K21 conductivity (NLT) and Sensoptic Resistance Probe (SRP): and C) pH by NWK pH-K21 (NpH). Also, measurements of % drip loss (PDL) and filter paper wetness (FPW), color brightness (L*), ultimate pH (pHu), lipid content, subjective color (SC), firmness/wetness (SF) and marbling scores (SM) were assessed. Each loin was categorized as either pale, soft and exudative (PSE), reddish-pink, soft and exudative (RSE), reddish-pink, firm and non-exudative (RFN) or dark, firm and dry (DFD). Statistically comparing coefficients of determination (CD), the results indicated that overall, the HGP predicted quality groups slightly better than MQM (CD=71 and 62% respectively), NpH and SRP were less effective (CD= 56 and 44% respectively), and SIP and NLT had the lowest values (CD=36 and 5% respectively). Combining various independent variable did not greatly improve the variation accounted for. When the data was sorted into marbling groups based on lipid content, this was not accurately predicted by any of the probe measurements. The MQM probe remained the best predictor for marbling class and accounted for about 25% of the lipid content variation. This was slightly improved to 33% when pHu was combined with MQM.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.12
• /
• pp.1651-1659
• /
• 2011

This study was conducted to detect quantitative trait loci (QTL) for thirteen growth and meat quality traits in pigs by combing QTL experimental populations. Two F2 reference populations that were sired by Korea native pig (KNP) and dammed by Landrace (LN) or Yorkshire (YK) were generated to construct linkage maps using 123 genetic markers (mostly microsatellites) and to perform QTL analysis on porcine chromosomes (SSCs) 1, 2, 3, 6, 7, 8, 9, 11, 13, 14, and 15. A set of line-cross models was applied to detect QTL, and a series of lack-of-fit tests between the models was used to characterize inheritance mode of QTL. A total of 23, 11 and 19 QTL were detected at 5% chromosome-wise level for the data sets of KNP${\times}$LN, KNP${\times}$YK cross and joint sets of the two cross populations, respectively. With the joint data, two Mendelian expressed QTL for live weight and cooking loss were detected on SSC3 and SSC15 at 1% chromosome-wise level, respectively. Another Mendelian expressed QTL was detected for CIE a on SSC7 at 5% genome-wise level. Our results suggest that QTL analysis by combining data from two QTL populations increase power for QTL detection, which could provide more accurate genetic information in subsequent marker-assisted selection.

• Spatial Information Research
• /
• v.23 no.6
• /
• pp.77-87
• /
• 2015

A design methodology for sustainable on the earth requires a synthetic, and holistic perspective to understand natural processes and urban environments. The apperceptive, holistic landscape design methodology includes one united environment combining analysis, planning and design. In addition, the individual process needs to provide enough spatial information and demands evaluation and understanding on the impact of a design result. The perspective and vision of Ian Mcharg, as asserted in his book, Design with Nature (1969), that the earth is one superorganism is being realized with Geodesign technologies. This paper made the following research efforts which can overcome the limit of the present GIS technologies for the sustainable landscape design: Review of the previous researches, analysis of foreign Geodesign cases and applied theories, suggestion of a Geodesign methodology for landscape design, selection of Geodesign tools and technologies for the implementation of the methodology, and finally the demonstration of effectiveness and potentiality by the application of the methodology.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.139-145
• /
• 2009

Reduction scheme is remarkably useful in the case requiring the repeated calculation procedure. Recently, the efficiency of the reduction scheme has been improved by combining scheme of sub-domain method. But, when the global domain is partitioned into a few sub-domains, sub-domains without constraints can be produced. it is needed to extract the ritz vector from each sub-domain to construct the reduced system of each sub-domain. it is easy to extract the ritz vector from sub-domain with constraint. on the other hand, pseudo inverse method should be employed to extract the ritz vector from sub-domain without constraint. generally, the pseudo inverse takes a large number of computing time to obtain a reduced system of a sub-domain without boundary condition. This trouble can be overcome by the reduced pseudo inverse scheme which proposed in this study. This scheme is based on the static condensation that is not related with selection of the primary degrees of freedom. Numerical examples demonstrate that present method saves computational cost effectively and predicts the accurate eigenvalues.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.2
• /
• pp.505-509
• /
• 2012

Background: Matrix metalloproteinases (MMP) are proteolytic enzymes that are essentially involved in turnover of the extracellular matrix (ECM). The aim was to investigate the diagnostic value of MMP-7 and MMP-10 as tumor markers in pleural effusion (PE) and evaluate the value of combining MMP-7, MMP-10 and carcinoembryonic antigen (CEA) assays as diagnostic aids for malignant cells. Materials and Methods: A total of 179 patients with PE (87 malignant and 92 benign) were included in this study. The levels of MMP-7 and MMP-10 were measured using ELISA. Results: Values for MMP-7 and MMP-10 were significantly higher in malignant PE than those in benign PE (P<0.01). Among all variables evaluated, logistic regression found that MMP-7 and MMP-10 were significantly correlated with the presence of malignant disease (P<0.01). Analysis of receiver operating characteristics (ROC) curves showed that the area under the curve of MMP-10 (0.806) was significantly larger than that of MMP-7 (0.771) and CEA (0.789) (P<0.01). With parallel interpretation, the combination of MMP-10 and CEA achieved the higher sensitivity of 94.6%. The combination of MMP-7 and CEA in serial interpretation was able to boost the specificity to 95.7%. The combination of MMP-7, MMP-10 and CEA produced better sensitivity, specificity, PPV and NPV than MMP-7 and MMP-10 alone. Conclusion: MMP-7 and MMP-10 in PE may represent helpful adjuncts to conventional diagnostic tools in ruling out malignancy as a probable diagnosis, thus guiding the selection of patients who might benefit from further invasive procedures.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.18 no.2
• /
• pp.69-75
• /
• 2009

Daba ecorace of Antheraea mylitta Drury (Lepidoptera: Saturniidae), the semi domesticated Indian tropical tasar silkworm being reared outdoor; the egg and silk yields are dependent of genotype environment interaction. The insufficient maintenance and multiplication of its P4 seed stock need a coherent as well as scientific strategy to safeguard breed potential, being commercially applied ecorace. The sort-out lines of P4 stock studied over five generations highlighting on commercial trait up gradation suits for a tropical crop season, revealed enhanced performance. The line with high pupal parents (T2) shown improved fecundity (12.9%) and the line with high shell parents (T3) recorded higher shell weight (40.0%) and silk ratio (24.1%). While, the line of high pupal female and high shell male (T4) reveal enhancement in fecundity (9.0%), egg hatching (14.1%), shell weight (50.0%), silk ratio (35.2%) and absolute silk yield (52.0%) indicating the need and role of varied basic seed stock lines. The approach could improve economically vital egg fecundity and cocoon shell weights besides balancing them in same line for commercial operation. The progressive show of lines (T1 to T4) along successive generations (G1 to G5), in spite of passing through seed crop (Jul-Aug) and commercial crop (Sep-Nov) seasons emphasize their compatibility. The study infers that the strategic plan of combining preferred parental phenotypes, methodical selection for desired commercial trait(s) through generations with best possible genotype environment interaction has enriched P4 stock with elevation in needy trait(s) besides assuring choice of suitable lines for seasons and regions and timely replenishment of basic seed of Daba ecorace.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.2
• /
• pp.173-179
• /
• 2009

Reduction scheme is remarkably useful in the case requiring the repeated calculation procedure. Recently, the efficiency of the reduction scheme has been improved by combining scheme of sub-domain method. But, when the global domain is partitioned into a few sub-domains, sub-domains without constraints can be produced. it is needed to extract the ritz vector from each sub-domain to construct the reduced system of each sub-domain. it is easy to extract the ritz vector from sub-domain with constraint. on the other hand, pseudo inverse method should be employed to extract the ritz vector from sub-domain without constraint. generally, the pseudo inverse takes a large number of computing time to obtain a reduced system of a sub-domain without boundary condition. This trouble can be overcome by the reduced pseudo inverse scheme which proposed in this study. This scheme is based on the static condensation that is not related with selection of the primary degrees of freedom. Numerical examples demonstrate that present method saves computational cost effectively. In addition, it is shown that the reduced system based on the proposed scheme predicts the accurate eigenvalues of global system.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.7
• /
• pp.515-522
• /
• 2018

An orthogonal frequency division multiplexing with coded direct index modulation(OFDM-CDIM) system that can achieve higher performance and spectral efficiency than previous OFDM systems is proposed. Previous OFDM with index modulation(IM) and OFDM-IM using dual modes systems allocate additional data to indices of respective subcarriers through combining operation with high complexity and then transmit them. However, the proposed system directly allocates the mode selection information to each subcarrier without performing additional operations. Then, the system selects and transmits one symbol in the selected mode. Furthermore, only the data allocated to the index of the subcarrier is encoded, and a good performance improvement effect is obtained with a high code rate. Simulation results show quantitatively that an OFDM-CDIM system using four modes improves bit error rate performance and transmission efficiency in additive white Gaussian noise and Rayleigh fading channel environments compared with a conventional OFDM system using 4-ary quadrature amplitude modulation.

• Journal of Korea Multimedia Society
• /
• v.6 no.1
• /
• pp.136-147
• /
• 2003

To achieve an optimal performance for a given problem, we need an integrative process of the parameter optimization via learning and the structure optimization via model selection. In this paper, we propose an efficient optimization method for improving generalization performance by considering the property of each sub-method and by combining them with common theoretical properties. First, weight parameters are optimized by natural gradient teaming with adaptive regularization, which uses a diverse error function. Second, the network structure is optimized by eliminating unnecessary parameters with natural pruning. Through iterating these processes, candidate models are constructed and evaluated based on the Bayesian Information Criterion so that an optimal one is finally selected. Through computational experiments on benchmark problems, we confirm the weight parameter and structure optimization performance of the proposed method.

• Journal of Labour Economics
• /
• v.40 no.2
• /
• pp.31-68
• /
• 2017

This study examined the moonlighting behavior in Korea, to which relatively less attention has been paid. Based on the wage earners of 25 to 65 year old married, the results show that about 1.4% of the sample have dual jobs, working very long hours, on average 60 hours for a week combining both the primary job and the secondary job. The results of the fixed effects logit model on the moonlighting participation indicate that the wage rate and the hours of work in the primary job have a negative effect on moonlighting participation while the insecurity of the primary job appears to lead to a higher probability of taking a secondary job. The results of the moonlighting hours analysis suggest that hours worked in the primary job have a negative effect on moonlight hours while the wage of the primary job does not appear to have any significant effect on moonlighting hours. Interestingly enough, the wage of the secondary job appears to have a negative impact on moonlighting hours, which might be very plausible considering the long working hours moonlighters are engaged in.