• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.75-80
• /
• 2004

The study analyzes about brand image's effect and change when customers purchase product. Purpose of this study suggests how to influence that brand image come up to product purchase to cosmetic customer . Consumers compare with product and trademark when they select product. Consumers evaluate dissatisfaction and satisfaction about goods that they choose through comparison and analysis. Find the factor that decides consumer's choice. Give weight by the scores of each factor's relative importance. The purpose of this study is find various requirement of consumers and present efficient marketing activity through theoretical verification and actual proof analysis .

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.522-524
• /
• 1994

This paper presents power factor and distortion improvement methods via active boost converter and mode select. This method not only reduces the current and voltage distortion but also the physical size and expected low cost. Optimum parameter values arc derived to minimize the harmonise in the input current. A theoretical analysis, simulation and experimental results arc presented.

• Journal of the Korean Data and Information Science Society
• /
• 제21권3호
• /
• pp.569-574
• /
• 2010

We consider two components system which have Freund's bivariate exponential model. In this case, Bayesian multiple comparisons procedure for failure rates is sug-gested in K Freund's bivariate exponential populations. Here we assume that the com-ponents enter the study at random over time and the analysis is carried out at some prespeci ed time. We derive fractional Bayes factor for all comparisons under non- informative priors for the parameters and calculate the posterior probabilities for all hypotheses. And we select a hypotheses which has the highest posterior probability as best model. Finally, we give a numerical examples to illustrate our procedure.

• 전자공학회논문지A
• /
• 제31A권12호
• /
• pp.1-8
• /
• 1994

In this paper, we hve compare the performance of DAR(Dynamic Adaptive Routing) with that of FSR(Flooding Search Routing) to select an adequate routing protocol in circuit-switched networs. As a performance factor, we have considered call setup time, which is the key factor of performance evaluation in circuit switched networks. We have evaluated the performance of two methods in grid topology circuit-switched networks using a commn channel signaling scheme, as application examples. As results, FSR method shows better performance than DAR method under light traffic load, when the number of links by which call has passed increases, but DAR method represents better performance than FSR method under heavy traffic load or large networks because of redundant packets.

• 한국인터넷방송통신학회논문지
• /
• 제8권1호
• /
• pp.19-24
• /
• 2008

본 논문에서는 모바일 영상을 위한 JPEG 양자화 테이블 설계 방법을 제안한다. 작은 화면에서 많은 정보를 표현해야 하는 모바일 영상의 특성을 고려하여 고주파 성분의 영향을 보정하도록 양자화 테이블을 모델링한다. 제안한 모델링 방법을 서비스되는 모바일 QVGA 영상에 적용하여 pre-emphasis factor를 최적화 하였다. 모바일 QVGA 영상에 대한 실험을 통하여 bpp와 PSNR이 향상됨을 보였다.

• 한국자기공명학회논문지
• /
• 제2권1호
• /
• pp.59-65
• /
• 1998

The correction of image artifacts due to misadjustment in tuning of RF coils (tip angle) and in the RF single sideband spectrometer was investigated using phase cycling of the $\pi$/2 and $\pi$ pulses in spin-echo sequences. A general procedure was developed for the systematic design of phase cycles that select desirable coherence transfer pathways. To analyze a phase cycling sequence, changes in the coherence level and phase factor for each RF pulse in the spin-echo cycle must be determined. Four different phase cycling schemes (FIXED, ALTERNATE, FORWARD, REVERSED) to suppress unwanted signal components such as mirror and ghost images were evaluated using two signal acquisitions. When the receiver phase factor is cycled counter-clockwise (REVERSED), these artifacts are completely removed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.835-840
• /
• 2000

The objective of the present study is to investigate the characteristics of pressure wave propagation of viscous fluid flow in a circular pipe line. The goal of this study is to select the best frequency of each control factor of a circular pipe. We intend to approach a formalized mathematical model by a very exact and reasonable polynomial for fluid transmission lines. and we computed this mathematical model by computer. The results show that the oil viscosity decreased as the length of the circular pipe increases. and The energy of pressure wave propagation decreased as the pipe diameter decreases. The factor is that density of oil was changed resonant frequency. It has been found the viscosity characteristics is changed largely by length of hydraulic pipe and volume of cavity tank.

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1426-1435
• /
• 2003

Design goal is to find the one that has the highest probability of success and the smallest variation. A robustness index has been proposed to satisfy these conditions. The two-step optimization process of the target problem requires a scaling factor. The search process of a scaling factor is replaced with the making of the decoupled design between the mean and the standard deviation. The decoupled design matrix is formed from the sensitivity or the sum of squares. After establishing the design matrix, the robust design process has a new three-step one. The first is ″reduce variability,″ the second is ″make the candidate designs that satisfy constraints and move the mean on the target,″ and the final is ″select the best robust design using the proposed robustness index.″ The robust design process is verified by three examples and the results using the robustness index are compared with those of other indices.

• Food Science and Biotechnology
• /
• 제18권5호
• /
• pp.1076-1082
• /
• 2009

Six pesticides were determined in hot pepper leaves after successive processing steps of washing, blanching, and drying. The tested pesticides included dichlofluanid, flusilazole, folpet, iprodione, ${\lambda}$-cyhalothrin, and lufenuron. Each pesticide was singly applied to the leaves of the pepper plants, which were being cultivated in a greenhouse. The processing factors were dependent on the type of pesticide, and were in the following ranges: 0.09-0.73 by washing, <0.00-0.48 after blanching, and <0.00-3.30 after drying. Only lufenuron showed a processing factor of more than 1, at 3.30 in dried leaves, while the processing factors of the other pesticides were less than 1. The removal ratios of the tested pesticides by washing ranged from 27 to 90%. The blanching step increased their removals by 10-25%. However, drying did not have an effect on residue reduction. Finally, after proceeding to the drying step, removal ratios ranged from 85 to 100%, with the exception of lufenuron at 47%.

• 대한기계학회논문집B
• /
• 제30권8호
• /
• pp.741-748
• /
• 2006

This paper numerically investigates the effects of pass arrangement on the flow distribution characteristics and the performance of a multi-pass multi-branch heat exchanger. Four cases of pass arrangement (2, 4, 6, 8 pass) are chosen to select a proper pass arrangement. A JF factor is used as an evaluation characteristic value to consider the heat transfer and the pressure drop. The present results indicate that 4-pass heat exchanger shows the best performance, and the design parameters in 4-pass heat exchanger are optimized. The design parameters are the locations of the inlet, outlet and separator, and are optimized using a response surface methodology. The JF factor of the optimum model is increased by about 9.3%, compared to that of the reference model (2-pass heat exchanger).