• 제목/요약/키워드: Seismic Interpretation

검색결과 135건 처리시간 0.02초

Resolving a velocity inversion at the geotechnical scale using the microtremor (passive seismic) survey method

  • Roberts James C.;Asten Michael W.
    • 지구물리와물리탐사
    • /
    • 제7권1호
    • /
    • pp.14-18
    • /
    • 2004
  • High levels of ambient noise and safety factors often limit the use of 'active-source' seismic methods for geotechnical investigations in urban environments. As an alternative, shear-wave velocity-depth profiles can be obtained by treating the background microtremor wave field as a stochastic process, rather than adopting the traditional approach of calculating velocity based on ray path geometry from a known source. A recent field test in Melbourne demonstrates the ability of the microtremor method, using only Rayleigh waves, to resolve a velocity inversion resulting from the presence of a hard, 12 m thick basalt flow overlying 25 m of softer alluvial sediments and weathered mudstone. Normally the presence of the weaker underlying sediments would lead to an ambiguous or incorrect interpretation with conventional seismic refraction methods. However, this layer of sediments is resolved by the microtremor method, and its inclusion is required in one-dimensional layered-earth modelling in order to reproduce the Rayleigh-wave coherency spectra computed from observed seismic noise records. Nearby borehole data provided both a guide for interpretation and a confirmation of the usefulness of the passive Rayleigh-wave microtremor method. Sensitivity analyses of resolvable modelling parameters demonstrate that estimates of shear velocities and layer thicknesses are accurate to within approximately $10\%\;to\;20\%$ using the spatial autocorrelation (SPAC) technique. Improved accuracy can be obtained by constraining shear velocities and/or layer thicknesses using independent site knowledge. Although there exists potential for ambiguity due to velocity-thickness equivalence, the microtremor method has significant potential as a site investigation tool in situations where the use of traditional seismic methods is limited.

상호검증시험을 통한 효율적인 다운홀 탄성파 기법 수행 시스템의 구성 (Construction of Efficient Downhole Seismic Testing System by the Round Robin Test)

  • 방은석;김기석;김동수
    • 한국지반공학회논문집
    • /
    • 제23권4호
    • /
    • pp.133-147
    • /
    • 2007
  • 지반의 전단파 속도 주상도를 도출하는데 있어 다운홀 기법은 하나의 시추공을 이용하고 간단한 지표면 가진원을 사용하므로 매우 경제적이다. 따라서 학교와 현업에서 지반조사 및 연구 목적으로 널리 사용되고 있다. 그러나 올바르지 못한 장비의 구성과 해석과정으로 인하여 결과의 신뢰성에 문제가 있어왔다. 본 연구에서는 다운홀 기법의 상호검증시험(Round Robin Test)을 통해 참여 기관에 대해서 각각의 실험 장비와 결과 해석 과정에 대해 비교함으로써 문제점에 대해 분석하였으며 이를 바탕으로 최적의 수행 시스템을 구성하였다. 효율적인 가진원을 제작하고 적절한 감지기를 도입 혹은 제작하였으며 노트북 기반의 신호 획득 시스템을 구축하였다. 신호 획득 및 관리 프로그램, 결과도출 프로그램을 통해 현장에서 효율적으로 실험을 진행하고 신뢰성 있는 최종 결과를 신속하게 도출할 수 있도록 하였다. 구성된 수행 시스템을 이용하여 현장 적용 실험을 수행하였으며 그 효율성을 확인할 수 있었다.

파선코드 자동생성 알고리즘에 관한 연구 (A study on Algorithm Automatically Generating Ray Codes for Ray-tracing)

  • 이희일;조창수
    • 지구물리와물리탐사
    • /
    • 제11권4호
    • /
    • pp.361-367
    • /
    • 2008
  • 파선추적법을 이용하여 지진연구나 탄성파 탐사자료처리 또는 해석을 위해 합성탄성파기록을 작성하는 경우, 가장 다루기 힘들고 실수를 유발하기 쉬운 일 가운데 하나가 추적하고자하는 파선들의 전파경로를 하나하나 지정해주는 것이다. 주어진 음원으로부터 수진기에 도달하는 무수히 많은 파 중에서 중요한 위상들에 대한 파선경로를 누락하거나, 잘못 지정하는 경우에 해석상의 커다란 오류를 가져올 수 있기 때문에 파선추적법에서 이는 아주 중요한 문제이다. 본 연구에서는 이와 같은 문제점을 해결하기 위해 음원이나 수진기가 지표상 또는 임의의 지층 내에 위치한 경우에도 주어진 모델에 대해 음원과 수진점을 잇는 모든 전파경로를 빠짐없이 체계적으로 생성해주는 알고리즘을 개발하였다. 본 연구에서 개발된 알고리즘은 탄성파탐사 자료해석 시 다중반사파 특성파악, 다중반사파 제거연구 및 지진분야에서는 코다 파(coda wave) 특성연구, 분지에서의 지진파 증폭효과 연구, 모드 변환된 다중반사파의 위상식별 등에 효과적으로 이용될 수 있을 것이다.

3-D 지층의 굴절 및 반사 주시곡선 해석 연구 (A Study on Interpretation of Seismic Refraction and Reflection Traveltime Curves in 3-D Layers)

  • 양승진;유해수;박석재
    • 자원환경지질
    • /
    • 제25권1호
    • /
    • pp.79-85
    • /
    • 1992
  • An Interpretation technique is presented to determine strike, dip, velocity and depth of 3-D planar layers from refraction or reflection traveltime curve. This interpretation technique determines the direction of emerging ray from the slope of the traveltime curve and traces the emerging ray to the refractor or reflector. The ray direction in the last layer is used to decide the normal vector to the refractor or reflector from whick its dip, strike and velocity are calculated. The vertical depth to the refractor or reflector is computed by using the intercept or zero-offset time and the ray direction in each layer. Some tests on the interpretation method are performed for the sysnthetic traveltimes generated in 3-D model layers and show that the paramerters of the model layers are accurately determined.

  • PDF

Seismic attributes for characterization of a heavy-oil shaly-sand reservoir in the Muglad Basin of South Sudan

  • Deng, William A.;Kim, Taeyoun;Jang, Seonghyung
    • Geosciences Journal
    • /
    • 제22권6호
    • /
    • pp.1027-1039
    • /
    • 2018
  • Seismic attributes are often used to identify lithology and evaluate reservoir properties. However, interpretation based only on structural attributes and without knowledge of the Vp/Vs ratio can limit the ability to evaluate changes in heavy oil reservoirs. These limitations are often due to less obvious impedance differences. In order to investigate pieces of evidence of a heavy-oil shaly-sand reservoir from seismic data, besides geochemistry, we studied seismic attributes and characterized the reservoir using seismic stack data and well logging data. The study area was the Muglad rift basin in South Sudan. We conducted a seismic complex analysis to evaluate the target reservoir. To delineate the frequency responses of the different lithological units, we applied the spectral decomposition method to the target reservoir. The most unexpected result was continuous bands of strong seismic reflectors in the target reservoir, which extended across the borehole. Spectral decomposition analysis showed that the low-frequency zone of 25 Hz dominant frequency was consistent with instantaneous attributes. This approach can identify lithology, reveal frequency anomalies, and filter the stacked section into low- and high-frequency bands. The heavy-oil reservoir zones exhibited velocity attenuation and the amplitude was strongly frequency dependent.

남해 소라 및 북소라 소분지 일대의 탄성파단면 해석 (Interpretation of Seismic Profiles in the Sora and North Sora Sub-basins, South Sea of Korea)

  • 이성동;오진용;박명호;장태우
    • 한국석유지질학회지
    • /
    • 제14권1호
    • /
    • pp.63-73
    • /
    • 2008
  • 국내 대륙붕 6-2광구 내 소라 및 북소라 소분지 일대의 반사법 탄성파탐사 자료 해석을 통하여 분지 발달사에 대한 연구를 수행하였다. 소라 및 북소라 소분지는 크게는 도미 분지에 속하는 분지로 위치상으로는 일본의 후쿠에 분지와 함께 동중국해 분지의 북동쪽 경계에 위치한다. 분지 내 층의 연령을 결정하기 위해서 일본측의 탄성파해석 자료를 중심으로 시추공자료를 이용하였다. 이를 통해 4개의 층준을 해석하였으며 이 층준들은 분지 내 퇴적물을 다음과 같이 총 5개의 구간으로 나누었다; Y구간(기반암), Q구간(에오세$\sim$중기 올리고세), M 구간(중기 올리고세$\sim$초기 마이오세), L 구간(초기 마이오세$\sim$후기 마이오세), D 구간(후기 마이오세$\sim$현재). 이와 더불어 소라 및 북소라 소분지의 주 분지경계단층과 퇴적구조를 해석하였다. 주 분지경계단층의 주향, 분지 내 퇴적층의 경사방향, 분지의 분포 그리고 성장단층의 발달 유무 등의 차이를 관찰하였는데 이를 통해서 소라 소분지가 북소라 소분지 보다 먼저 발달한 것으로 추측된다.

  • PDF

Evaluating seismic liquefaction potential using multivariate adaptive regression splines and logistic regression

  • Zhang, Wengang;Goh, Anthony T.C.
    • Geomechanics and Engineering
    • /
    • 제10권3호
    • /
    • pp.269-284
    • /
    • 2016
  • Simplified techniques based on in situ testing methods are commonly used to assess seismic liquefaction potential. Many of these simplified methods were developed by analyzing liquefaction case histories from which the liquefaction boundary (limit state) separating two categories (the occurrence or non-occurrence of liquefaction) is determined. As the liquefaction classification problem is highly nonlinear in nature, it is difficult to develop a comprehensive model using conventional modeling techniques that take into consideration all the independent variables, such as the seismic and soil properties. In this study, a modification of the Multivariate Adaptive Regression Splines (MARS) approach based on Logistic Regression (LR) LR_MARS is used to evaluate seismic liquefaction potential based on actual field records. Three different LR_MARS models were used to analyze three different field liquefaction databases and the results are compared with the neural network approaches. The developed spline functions and the limit state functions obtained reveal that the LR_MARS models can capture and describe the intrinsic, complex relationship between seismic parameters, soil parameters, and the liquefaction potential without having to make any assumptions about the underlying relationship between the various variables. Considering its computational efficiency, simplicity of interpretation, predictive accuracy, its data-driven and adaptive nature and its ability to map the interaction between variables, the use of LR_MARS model in assessing seismic liquefaction potential is promising.

탄성파 반사법 및 굴절법을 이용한 천해저 지반조사에 대한 연구 (A Study on the Shallow Marine Site Survey using Seismic Reflection and Refraction Method)

  • 신성렬;김찬수;조철현
    • 지구물리와물리탐사
    • /
    • 제11권2호
    • /
    • pp.109-115
    • /
    • 2008
  • 공학적 목적의 지반조사에 양질의 자료를 제공하기 위해서는 여러 가지 조사들이 동시에 수행되어야 하고 또한 통합적인 해석이 필요하다. 본 연구에서는 천해저에서 지층 경계에 대한 분해능이 뛰어나며 지층 형태 파악이 용이한 2개의 부머와 단일채널 스트리머를 이용한 탄성파탐사 반사법과 지층의 물리적 특성 가운데 중요한 성질인 탄성파 속도를 구할 수 있도록 한 개의 에어건과 4 m 간격의 24채널 해저면 수신케이블을 제작하여 이용한 굴절법을 동시에 수행함으로써 보다 정확한 지질정보 획득을 시도하였다. 단일채널 반사법 탐사자료는 통상적인 전산처리과정을 통하여 해상도 및 품질이 향상된 2차원 고해상 탄성파 단면도를 얻었고, OBC (Ocean Bottom Cable) type의 수진기를 이용하여 얻은 굴절법 탐사자료는 토모그래피 방법을 통하여 속도 단면도를 구하였다. 두 가지 탐사 결과에 대한 통합적인 해석 단계로서 반사법 탄성파 단면도는 굴절법에서 얻은 속도정보를 이용하여 심도 전환된 단면도를 얻었고, 이로부터 3차원 기반암 심도 단면도와 퇴적층 두께 분포도 등에 대한 정보를 도출할 수 있었다. 천해저 지반조사 분야에 본 연구에서 제시한 방법을 이용하면 보다 정확하고 신뢰성 높은 지질정보가 파악될 것으로 사료된다.

3차원 탄성파자료의 층서구분을 위한 패치기반 기계학습 방법의 개선 (Improvements in Patch-Based Machine Learning for Analyzing Three-Dimensional Seismic Sequence Data)

  • 이동욱;문혜진;김충호;문성훈;이수환;주형태
    • 지구물리와물리탐사
    • /
    • 제25권2호
    • /
    • pp.59-70
    • /
    • 2022
  • 최근의 연구들을 통해 기계학습은 탄성파 해석 분야에 그 적용 범위를 확장하고 있으며, 탄성파 해석에서 중요한 탄성파 층서 구분을 수행하는 합성곱 신경망들의 개발도 수행되었다. 하지만 지도 학습의 경우 대량의 학습 자료가 필요하며, 비용과 시간의 한계로 탄성파 층서구분의 지도학습은 학습 자료의 부족이 문제가 될 수 있다. 이번 연구에서는 자료 부족 문제를 보완하기위해 탄성파 단면에 패치 분할과 자료증강을 적용하였다. 또한 패치 분할로 손실될 수 있는 공간정보를 제공하기 위해 깊이를 고려할 수 있는 인공 채널을 생성하여 추가하였다. 실험을 위한 학습 모델로 U-Net을 사용하였으며, 층서 구분을 위한 학습 자료가 제공되는 F3 block 자료를 이용하여 학습과 예측 결과에 대한 평가를 수행하였다. 분석 결과 자료증강과 인공 채널의 추가로 패치 기반의 층서 구분 학습 모델을 개선할 수 있음을 확인하였다.

동해 가스하이드레이트 탐사에 적용한 지구물리탐사 방법 (Geophysical Methods applied for Gas Hydrate Exploration in the East Sea)

  • 이호영;박근필;유동근;구남형;김원식;김병엽;강동효;김한준
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2007년도 특별 심포지엄 논문집
    • /
    • pp.53-62
    • /
    • 2007
  • Preliminary gas hydrate surveys were carried out From 2000 to 2004 in the East Sea. Research results showed the geophysical evidence of gas hydrate existence. In 2005, Gas Hydrate R&D Organization was established and 10 year gas hydrate development program was initiated. In the $1^{st}$ stage of the program from 2005 to 2007, 6,600 L-km 2-D seismic survey was conducted in the $1^{st}$ year 2005, and $400\;km^2$ 3D survey was conducted in the $2^{nd}$ year 2006. Acquired seismic data were processed and seismic section and 3D cube were produced. By geophysical interpretation and velocity analysis, prospective areas were mapped and candidate drilling sites were recommended. For the precise interpretation, velocity was analyzed using AVO method, and BSR signal was analyzed using deconvolution method. For the prospective area, OBS and high-resolution seismic surveys were conducted. This presentation shows the introduction and examples of the research results of the geophysical methods applied for the gas hydrate exploration in the East Sea.

  • PDF