• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.381-387
• /
• 2000

Si3N4/stainless steel 316 joints with Ni buffer layer were fabricated by direct active brazing method (DIB) using Ag-Cu-Ti brazing alloy only and double brazing method (DOB) using Ag-Cu brazing alloy with Si3N4 pretreated with Ag-Cu-Ti brazing alloy. For the joint brazed by DIB method, Ti was segregated at the Si3N4/brazing alloy interface, but was not enough to form a stable joint interface. In addition, large amounts of Ni-Ti inter-metallic compounds were formed in tehbrazing alloy near the joint interface, which could deplete the contents of Ti involved in the interfacial reaction. However, for the joint brazed by DOB method, segregation of Ti at the joint interface were enough to enhance the formation of stable interfacial reaction products such as TiN and Ti-Si-Ni-N-(Cu) multicompounds, which restricted the formation of Ni-Tio inter-metallic compounds in the brazing alloy during brazing with Ni buffer layer. Fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was much improved by using DOB method rather than DIB method. It could be deduced that the differences of fracture strength of the joint with Ni buffer layer depending on brazing process adapted were directly affected by the formation of stable joint interface and the change in microstructure of the brazing alloy near the joint interface. It was found that fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was gradually reduced as the thickness of interface. It was found that fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was gradually reduced as the thickness of Ni buffer layer in the joint was increased from 0.1 mm to 10 mm. It seems to due to the increased residual stress in the joint as the thickness of Ni buffer layer is increased. The maximum fracture strength of Si3N4/S.S 316 joints with Ni buffer layer was 386 MPa, and the fracture of joint was originated at Si3N4/brazing alloy joint interface and propagated into Si3N4 matrix.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.2
• /
• pp.202-210
• /
• 1983

These experiments were conducted to study the relationship among agronomic traits, varietal variation of grain-filling periods and the effect of environmental conditions on the grain-filling in the ten selected barley cultivars. The varietal variation of grain-filling periods was of significance: Tokak had the similar increment in both greenhouse and field plot, Suweon two row was believed to be an cultivar with short grainfilling period. Cultivars with higher grain-filling rates tended to. have significantly lower ash content. Ash content of a cultivar tended to be lower when grown under favorable condition. At maturity, the time of development of yellow or dark pigment at the crease base could be a possible criterion for physiological maturity determination. However, this requires further study. Average grain-filling period in the different conditions was constant, but varietal differences were 9 days in the greenhouse and 5 days in the field. The grain moisture content was not constant in accordance to both cultivars and growing conditions. Average accelerated days for heading and ripening periods were very constant in comparision with field and vinyl mulching suggests that the selected materials will be useful for genetic study on grain-filling periods. The cultivars and grown conditions with higher accumulated temperature per $100^{\circ}C$ from early grain-filling had larger grain-filling rates and heavier 1000 grain weight. This study showed that if the variation among and within cultivars is to be minimized, the greenhouse and vinyl mulching plots could be useful for genetic study on grain-filling periods in $BC_1$ and $F_2$ segregation.

• Journal of Microbiology and Biotechnology
• /
• v.25 no.8
• /
• pp.1195-1204
• /
• 2015

Increasing evidence suggests that gut microbiota underpin the development of health and longevity. However, our understanding of what influences the composition of this community of the longevous has not been adequately described. Therefore, illumina sequencing analysis was performed on the gut microbiota of centenarians (aged 100-108 years; RC) and younger elderlies (aged 85-99 years; RE) living in Bama County, Guangxi, China and the elderlies (aged 80-92 years; CE) living in Nanning City, Guangxi, China. In addition, their diet was monitored using a semiquantitative dietary questionary (FFQ 23). The results revealed the abundance of Roseburia and Escherichia was significantly greater, whereas that of Lactobacillus, Faecalibacterium, Parabacteroides, Butyricimonas, Coprococcus, Megamonas, Mitsuokella, Sutterella, and Akkermansia was significantly less in centenarians at the genus level. Both clustering analysis and UniFraq distance analysis showed structural segregation with age and diet among the three populations. Using partial least square discriminate analysis and redundancy analysis, we identified 33 and 34 operational taxonomic units (OTUs) as key OTUs that were significantly associated with age and diet, respectively. Age-related OTUs were characterized as Ruminococcaceae, Clostridiaceae, and Lachnospiraceae, and the former two were increased in the centenarians; diet-related OTUs were classified as Bacteroidales, Lachnospiraceae, and Ruminococcaceae. The former two were deceased, whereas the later one was increased, in the high-fiber diet. The age and high-fiber diet were concomitant with changes in the gut microbiota of centenarians, suggesting that age and high-fiber diet can establish a new structurally balanced architecture of gut microbiota that may benefit the health of centenarians.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.5
• /
• pp.92-103
• /
• 2015

Box-Wilson experimental design method, known as central composite design, is the design of any information-gathering exercises where variation is present. This method was devised to gather as much data as possible in spite of the low design cost. This method was employed to model the effect of mixing factors on several performances of 60 MPa high strength self compacting concrete and to numerically calculate the optimal mix proportion. The nonlinear relations between factors and responses of HSSCC were approximated in the form of second order polynomial equation. In order to characterize five performances like compressive strength, passing ability, segregation resistance, manufacturing cost and density depending on five factors like water-binder ratio, cement content, fine aggregate percentage, fly ash content and superplasticizer content, the experiments were made at the total 52 experimental points composed of 32 factorial points, 10 axial points and 10 center points. The study results showed that Box-Wilson experimental design was really effective in designing the experiments and analyzing the relation between factor and response.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.41-41
• /
• 2007

For use in spintronic materials, dilute magnetic semiconductors (DMS) are under consideration as spin injectors for spintronic devices[l]. $TiO_2$-based DMS doped by a cobalt, iron, and manganese et al. was recently reported to show ferromagnetic properties, even at temperatures above 300K and the magnetic ordering was explained in terms of carrier-induced ferromagnetism, as observed for a III-V based DMS. An anomalous Hall effect (AHE) and co-occurance of superparamagnetism in reduced Co-doped rutile $TiO_{2-\delta}$ films have also been reported[2]. Metal segregation in the reduced metal-doped rutile $TiO_2-\delta$ films still remains as problems to solve the intrinsic DMS properties. Superlattice films have been proposed to get dilute magnetic semiconductor (DMS) with intrinsicroom-temperature ferromagnetism. For a $TiO_2$-based DMS superlattice structure, each layer was alternately doped by two different transition metals (Fe and Mn) and deposited to a thickness of approximately $2.7\;{\AA}$ on r-$Al_2O_3$(1102) substrates by pulsed laser deposition. The r-$Al_2O_3$(1102) substrates with atomic steps and terrace surface were obtained by thermal annealing. Samples of $Ti_{0.94}Fe_{0.06}O_2$(TiFeO), $Ti_{0.94}Mn_{0.06}O_2$(TiMnO), and $Ti_{0.94}(Fe_{0.03}Mn_{0.03})O_2$ show a low remanent magnetization and coercive field, as well as superparamagnetic features at room temperature. On the other hand, superlattice films (TiFeO/TiMnO) show a high remanent magnetization and coercive field. An anomalous Hall effect in superlattice films exhibits hysisteresis loops with coercivities corresponding to those in the ferromagnetic Hysteresis loops. The superlattice films composed of alternating layers of $Ti_{0.94}Fe_{0.06}O_2$ and $Ti_{0.94}Mn_{0.06}O_2$ exhibit intrinsic ferromagnetic properties for dilute magnetic semiconductor applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.130.2-130.2
• /
• 2013

Today, chemical vapor deposition (CVD) of hydrocarbon gases has been demonstrated as an attractive method to synthesize large-area graphene layers. However, special care should be taken to precisely control the resulting graphene layers in CVD due to its sensitivity to various process parameters. Therefore, a facile synthesis to grow graphene layers with high controllability will have great advantages for scalable practical applications. In order to simplify and create efficiency in graphene synthesis, the graphene growth by thermal annealing process has been discussed by several groups. However, the study on growth mechanism and the detailed structural and optoelectronic properties in the resulting graphene films have not been reported yet, which will be of particular interest to explore for the practical application of graphene. In this study, we report the growth of few-layer, large-area graphene films using rapid thermal annealing (RTA) without the use of intentional carbon-containing precursor. The instability of nickel films in air facilitates the spontaneous formation of ultrathin (<2~3 nm) carbon- and oxygen-containing compounds on a nickel surface and high-temperature annealing of the nickel samples results in the formation of few-layer graphene films with high crystallinity. From annealing temperature and ambient studies during RTA, it was found that the evaporation of oxygen atoms from the surface is the dominant factor affecting the formation of graphene films. The thickness of the graphene layers is strongly dependent on the RTA temperature and time and the resulting films have a limited thickness less than 2 nm even for an extended RTA time. The transferred films have a low sheet resistance of ~380 ${\Omega}/sq$, with ~93% optical transparency. This simple and potentially inexpensive method of synthesizing novel 2-dimensional carbon films offers a wide choice of graphene films for various potential applications.

• Journal of Welding and Joining
• /
• v.18 no.2
• /
• pp.213-213
• /
• 2000

This study was performed to investigate types and formation mechanism of cracks in two Al alloy welds, A5083 and A7NO1 spot-welded by pulse Nd: YAG laser, using SEM, EPMA and Micro-XRD. In the weld zone, three types of crack were observed: center line crack($C_{C}$), diagonal crack($C_{D}$), and U shape crack($C_{U}$). Also, HAZ crack($C_{H}$), was observed in the HAZ region, furthermore, mixing crack($C_{M}$), consisting of diagonal crack and HAZ crack was observed.White film was formed at the hot crack region in the fractured surface after it was immersed to 10%NaOH water. In the case of A5083 alloy, white films in C crack and $C_D crack region were composed of low melting phases, Fe₂Si$Al_8$ and eutectic phases, Mg₂Al₃ and Mg₂Si. Such films observed near HAZ crack were also consist of eutectic Mg₂Al₃. In the case of A7N01 alloy, eutectic phases of CuAl₂, $Mg_{32}$ (Al,Zn) ₃, MgZn₂, Al₂CuMg and Mg₂Si were observed in the whitely etched films near $C_{C}$ crack and $C_{D}$ crack regions. The formation of liquid films was due to the segregation of Mg, Si, Fe in the case of A5083 alloy and Zn, Mg, Cu, Si in the case of A7N01 aooly, respectively.The $C_{D}$ and $C_{C}$ cracks were regarded as a result of the occurrence of tensile strain during the welding process. The formation of $C_{M}$ crack is likely to be due to the presence of liquid film at the grain boundary near the fusion line in the base metal as well as in the weld fusion zone during solidification. The $C_{U}$ crack is considered a result of the collapsed keyhole through incomplete closure during rapid solidification. (Received October 7, 1999)

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.230-236
• /
• 1993

We have the homoepitaxiallayers on the surfaces of Si(111) with and without the adsorbed surfactants, for example, Ag or Sn. In this paper, We have studied the difference of growth for these two cases by the observation of intensity oscillations of RHEED specular spots during the growing processes. In the case of growth without the adsorbed surfactants, the Si atoms fill first the stacking fault layer of Si(111) 7 ${\times}$7 structure. Therefore, the irregular oscillations are observed in the early stage of growing process. However, in the case of growth with the adsorbed surfactants, the surfactants already have the ${\sqrt}{3}$ ${\times}$ ${\sqrt}{3}$ structures on the surfaces of Si(111) at the adjucate temperatures of 300`$600^{\circ}C$ and 190~$860^{\circ}C$ for the surfactants of Ag and Sn, respectively. We also find that the number of oscillations is a little larger for the case of growth with the adsorbed surfactants. The reason for this is that for the case of growth with the adsorbed surfactants, the activation energies of Si atoms decrease due to the segregation of surfactants toward the growing surfaces.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.775-782
• /
• 1994

Influence of $TiO_{2}$ addition on sintering behavior and microstructure of MgO-$ZrO_{2}$ composites was studied. $ZrO_{2}$ containing 3mol%Y203 was existed as a c-$ZrO_{2}$ phase due to the formation of solubility of MgO, $TiO_{2}$ and $ZrO_{2}$ when sintered $1400^{\circ}C$ for 2h. All the compositions employed exhibited a similar shrinkage behavior with an end-point shrinkage between 8.58 and 11.00%. The additlon of $TiO_{2}$ promoted densification and the bulk density of specimen containing 1.67wt% $TiO_{2}$ was 3.75g/$\textrm{cm}^3$(98% TD) when $1600^{\circ}C$ for 2h. The amount of solubilities of MgO and TiOz in $ZrO_{2}$ were 5.ti7wt% and 2.62wt%,respectively. They were partially segregated near $ZrO_{2}$ grain boundary in the form of Ti-compounds during cooling. This segregation resulted in the formation microcracks which decreased the bending strength.

• Horticultural Science & Technology
• /
• v.31 no.1
• /
• pp.89-94
• /
• 2013

This study was carried out to calculate the genic values of days for flowering in commercial breeding lines of Korean hot pepper (Capsicum annuum L.). Two breeding lines of pepper '#2132' ($P_1$) early-flowering, and '#1308' ($P_2$) medium-late flowering, and their $F_1$ and $F_2$ generations were used in this study. By using partitioning method (Thseng and Hosokawa, 1971, 1972), it was possible to estimate, from the $F_2$ generations, the number of effective factor pairs differentiating the two parents. It was found out that the two parents were differentiated by two effective factor pairs, A:a and B:b. In the breeding lines used, the inheritance of days to flowering showed that the $F_1$ flowered a little earlier than the earlier flowering parent through the effect of over-dominance. However, $F_2$ flowered earlier or later than both parents through transgressive segregation. Conclusively, the magnitude of genic effects of A-a gene in flowering days was -13.81 days, and B-b gene was -6.73 days. The interaction between the two non-allelic factors using partitioning method was -5.26 days.