• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제50권6호
• /
• pp.263-272
• /
• 2001

The paper presents the design of a segmented type synchronous reluctance motor(SynRM) to increase its torque and power factor. The main feature of a segmented type synchronous reluctance motor is the flux barrier. Thus, the design process to find optimum value of various geometric parameters including flux barrier will be explained. Optimum value of each parameter is found where the d, q inductance difference and saliency ratio are maximized because these inductance characteristics are related to torque and power factor. Finite Element Analysis will be used to simulate motor characteristics. Analysis results of redesigned SynRM show higher saliency ratio over 10 and improved value of maximum power factor.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.3180-3186
• /
• 2011

A segmented scissors type switch has been developed for the urban transit maglev demonstration line to be commercialized near Incheon International Airport in 2013. Based on the design of the previous segmented 3-way switch, the scissors switch is composed of four segmented 2-way switches up/down and left/right and a turn table in the mid point. The main function of the scissors switch is to change the running direction of the train at end terminals. The developed scissors switch is planned to be installed in front of the 102 station, which has a side platform, of the demonstration line. The total length of the switch is 65m and the distance between the up and down track centerlines is 6m. The 2-way switches and turn table are made of steel box type beams, and have their own driving unit, locking unit, control unit, levitation and propulsion rails, and so on. Installed in the factory, a 100,000-cycle continuous operation test was carried out after manual and automatic test operations. The applicapability of the developed switch was verified through the measurements of the linearity of the track after repetitive operations, the mechanical operation noise, the load of the main driving motor, the safety of the control panel, the natural frequency of the girder, the deformation of the girder, and so on.

• 농촌지도와개발
• /
• 제28권1호
• /
• pp.13-23
• /
• 2021

This study aims to examine the market segmentation of rural healing tourists. A two-stage cluster method was used to segment the market of rural healing tourists, and the difference in satisfaction by segmented market was identified. In this study, a total of 433 cases were used for analysis. A total of four clusters of rural healing tourists were derived based on the purpose of visit and involvement with rural healing tourism. The names of each cluster were determined as 'high involvement, daily escape purpose type', 'high involvement, stress relief purpose type', 'low involvement, daily escape purpose type', and 'high involvement, exotic experience purpose type.' Each groups were found to have significant differences according to educational level, purpose of visit, companion, and expenditure. The satisfaction and the behavioral intention of rural healing tourists was highest in the group of 'high involvement, stress relief purpose type.' The results of this study suggest that the characteristics and satisfaction of rural healing tourists were differ according to the segmented group. This study suggests useful information for target marketing strategies for each segmented market according to the characteristics of rural healing tourists.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2013-2018
• /
• 2014

According to the manufacturing process of the laminated stator core for an inserted permanent magnet synchronous motor (IPMSM), the iron loss may be different. It is because the mechanical stress imposed to electrical steel sheet is strongly dependent on the manufacturing process. This paper proposes a new iron loss measurement algorithm which utilizes the induced voltage of a search coil and exciting current. The method is effective even when the distribution of magnetic flux density is not uniform along the magnetic flux path as well as uniform. The developed iron loss measurement system is applied to bonded- and embossed-type segmented stator cores of an IPMSM, and the iron losses are quantitatively compared.

• 한국의상디자인학회지
• /
• 제13권4호
• /
• pp.51-67
• /
• 2011

The purposes of this study were to segment male university students on the basis of benefit sought in clothing, and to investigate knitwear image preference and purchasing behaviors of each segmented market. The research method was a survey and subjects were 249 male university students in Daejeon and Chungnam province. The questionnaire consisted of measurement items for benefit sought in clothing, knitwear image preference, knitwear purchasing behaviors, and subject's demographic attributions. The data were analyzed by Cronbach's ${\alpha}$, factor analysis, cluster analysis, ${\chi}^2$ test, ANOVA and Scheffe test. The results were as follows. First, male university students were segmented into 6 consumer types (practicality pursuit, individuality pursuit, comport pursuit, brand pursuit, social status pursuit, and unconcern type) by benefit sought in clothing. Second, male university students generally preferred dandy image and causal image, however, brand pursuit type more preferred trendy image, and practicality pursuit type more preferred active image than other consumer types. Third, the segmented markets showed many differences on knitwear purchasing behaviors. On clothing selection criteria, practicality pursuit type considered resonable price as important, whereas brand pursuit type considered brand reputation. On fashion information source, individuality pursuit type considered store display and other people's clothing, while unconcern type considered advice from friend and family. On main purchasing place, individuality pursuit type more used speciality store with no brand, whereas brand pursuit type more used department store and brand store than other consumer types. The results of this study supported that benefit sought in clothing can be useful as an effective variable for market segmentation.

• 한국의류학회지
• /
• 제20권5호
• /
• pp.738-752
• /
• 1996

The purposes of this study were 1) to test the interactive effects of usage-situation (wedding receptions, home, and vacation) and personal characteristics (age, income, education, job or self-monitoring) on clothing benefits sought and 2) to identify brand type preference of consumer groups segmented by age, income, education, job or self-monitoring within a situation. The data were collected via a questionnaire from 601 housewives of ages 20's∼ 50's living in Seoul, Korea. The data were analyzed by factor analysis, repeated measure two-way ANOVA and Chi-square test. The results of this study were as follows. First, by repeated measure tow-way ANOVA, there were significant interactions of age and situation, and interactions of education and situation on Youth/Fashion benefits and Brand-value benefits. And interactive effects of education and situation on Self-expression benefits and Economic-value benefits were significant by repeated measure two-way A NOVA. Second, based on x2-test, brand type preference was significant difference between consumer groups segmented by age, education and job within a situation. And preferences of brand type were different among usage situations.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1254-1258
• /
• 2007

Electro-active polymer (EAP), one of the smart materials, is a new alternative offering ultra-precise movements and bio-compatibility. We present the results of the design, fabrication, and performance evaluation of a fabricated diaphragm-type polymer actuator using segmented polyurethane(SPU). This paper illustrates the relationship between the elastic modulus and maximum deflection as a key property of the Maxwell stress effect and also presents the relationship between the dielectric constant and maximum deflection as a key property of the electrostriction effect, especially in polymer actuators using SPU. A diaphragm-type actuator was used to induce an equation of the vertically distributed load by using a fully clamped circular plate as the boundary condition. To verify the equation, the results were compared to the data measured from load cell. In the near future, a low-cost check valves and bio-robot can be applied by its actuators.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 봄 학술발표회 논문집
• /
• pp.5-8
• /
• 1998

Polyurethane elastomers are segmented cocoplymer with an [HS]n-type structure. Typically, these materials are two-phase systems, prepared from relatively polar and stiff component called the hard segment(H) and relatively flexible component known as the soft segment(S). Diisocyanate and chain extender together form the hard segment, which is dispersed within a matrix of the soft segment, composed of the macrodiolos.(omitted)

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.911-915
• /
• 2014

Pyrotechnic devices are widely used for space appendages. However, a cube satellite requirements do not permit the use of explosive pyrotechnic device. A nichrome burn wire release has typically been used for holding and release of deployable appendages of the cube satellite due to its simplicity and low cost. However, relatively low mechanical constraint force and system complexity for application of multi-deployable systems are disadvantages of the conventional mechanism. To overcome these drawbacks, we have developed a segmented nut type holding and release mechanism based on the nichrome burn wire release. The great advantages of the mechanism are much lower shock level and larger constraint force than the conventional mechanism using pyro. Flight model for on-orbit verification was developed and verified through release function test, vibration test and thermal vacuum test.

• Computers and Concrete
• /
• 제20권3호
• /
• pp.319-327
• /
• 2017

Studying the structural behavior of prestressed segmented girders is quite important due to the large use this type of solution in viaducts and bridges. Thus, this work presents a nonlinear three-dimensional structural analysis of an externally prestressed segmented concrete girder through the Finite Element Method (FEM), using a customized ANSYS platform, version 14.5. Aiming the minimization of the computational effort by using the lowest number of finite elements, a new viscoelastoplastic material model has been implemented for the structural concrete with the UPF customization tool of ANSYS, adding new subroutines, written in FORTRAN programming language, to the main program. This model takes into consideration the cracking of concrete in its formulation, being based on fib Model Code 2010, which uses Ottosen rupture surface as the rupture criterion. By implementing this new material model, it was possible to use the three-dimensional 20-node quadratic element SOLID186 to model the concrete. Upon validation of the model, an externally prestressed segmented box concrete girder that was originally lab tested by Aparicio et al. (2002) has been computationally simulated. In the discretization of the structure, in addition to element SOLID186 for the concrete, unidimensional element LINK180 has been used to model the prestressing tendons, as well as contact elements CONTA174 and TARGE170 to simulate the dry joints along the segmented girder. Stresses in the concrete and in the prestressing tendons are assessed, as well as joint openings and load versus deflection diagrams. A comparison between numerical and experimental data is also presented, showing a good agreement.