• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.911-915
• /
• 2014

Pyrotechnic devices are widely used for space appendages. However, a cube satellite requirements do not permit the use of explosive pyrotechnic device. A nichrome burn wire release has typically been used for holding and release of deployable appendages of the cube satellite due to its simplicity and low cost. However, relatively low mechanical constraint force and system complexity for application of multi-deployable systems are disadvantages of the conventional mechanism. To overcome these drawbacks, we have developed a segmented nut type holding and release mechanism based on the nichrome burn wire release. The great advantages of the mechanism are much lower shock level and larger constraint force than the conventional mechanism using pyro. Flight model for on-orbit verification was developed and verified through release function test, vibration test and thermal vacuum test.

• 한국구조물진단유지관리공학회 논문집
• /
• 제15권5호
• /
• pp.169-177
• /
• 2011

본 연구에서는 충격하중에 유리한 층 구조를 갖는 패각의 구조를 채용한 콘크리트 분절 복합체의 충격하중 성능을 평가하였다. 콘크리트 분절 복합체의 성능을 향상시키기 위해서는 콘크리트 블록 사이의 모르타르의 부착강도가 개선되어야 한다. 따라서 본 연구에서는 모르타르의 부착강도를 향상시키기 위해 폴리머 모르타르를 적용하였다. 부착강도 실험에 따라 15% 라텍스 모르타르를 선정하였고, 일반 모르타르와 라텍스 모르타르를 적용한 부재에 대한 정하중 및 저속 충격하중 실험을 수행하였다. 실험 결과 모르타르의 부착력이 향상된 분절복합체가 높은 충격하중 저항 능력을 보였다. 불연속 균열 모델을 이용한 비선형 유한요소해석과 충격하중 실험의 결과와 충격에너지 소산도가 유사하게 나타났다. 따라서 분절복합체 해석 모델의 개선을 통해 다양한 변수의 충격 저항 능력의 예상과 평가가 가능할 것으로 판단된다.

• 대한조선학회논문집
• /
• 제53권6호
• /
• pp.482-493
• /
• 2016

The identification of modal damping of a segmented hull model with torsional response is difficult task due to the coupling of modal response. This is because the 1st and 2nd torsional vibration modes are closely spaced in frequency domain leading to the situation that the modal decomposition is difficult to achieve by simple band-pass filter. Present study applied several different modal decomposition methods to derive the damping ratio of different modes. The modal decomposition methods considered in this study are simple band-pass filter, Hilbert vibration decomposition, Wavelet transform and proper orthogonal decomposition. Coupled free decay signal obtained from the torsional hammering test on a segmented hull model was processed with four different methods and the derived damping ratios were compared with each other. Discussions also have been made on the pros and cons of the different methodologies.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권4호
• /
• pp.1064-1081
• /
• 2014

This paper presents a numerical analysis of slamming and whipping using a fully coupled hydroelastic model. The coupled model uses a 3-D Rankine panel method, a 1-D or 3-D finite element method, and a 2-D Generalized Wagner Model (GWM), which are strongly coupled in time domain. First, the GWM is validated against results of a free drop test of wedges. Second, the fully coupled method is validated against model test results for a 10,000 twenty-foot equivalent unit (TEU) containership. Slamming pressures and whipping responses to regular waves are compared. A spatial distribution of local slamming forces is measured using 14 force sensors in the model test, and it is compared with the integration of the pressure distribution by the computation. Furthermore, the pressure is decomposed into the added mass, impact, and hydrostatic components, in the computational results. The validity and characteristics of the numerical model are discussed.

• 한국의류학회지
• /
• 제24권8호
• /
• pp.1197-1208
• /
• 2000

The purpose of this study was to find out the effects of the accord between consumers benefit factors and attribute factors of brand image on brand attitude. This study was based on Kellers conceptualizing model of brand image. The subjects were 605 working women in their twenties living in Seoul, Korea. The data were analyzed by Euclidian distance model, ANOVA of repeated measures, regression, F-test by Extra Sum of Squares Principle. The results were as follows. 1. There were significant differences among the brands and among the segmented groups in the accord between benefit factors and attribute factors of brand image and in the brand preference. Moreover there were significant interactions between the brands and the segmented groups in the accord between benefit factors and attribute factors of brand image and in the brand preference. 2. There were significant effects of the accord between benefit factors and attribute factor of brand image on brand attitude. 3. There were significantly different effects of the accord between benefit factors and attribute factors of brand image on brand attitude among the segmented groups.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제3권1호
• /
• pp.65-71
• /
• 2011

Seakeeping analysis has progressed from the linear frequency-domain 2D strip method to the nonlinear timedomain 3D panel method. Nevertheless, the violent free surface flows such as slamming and green water on deck are beyond the scope of traditional panel methods based on potential theory. Recently, Computational Fluid Dynamics (CFD) has become an attractive numerical tool that can effectively deal with the violent free surface flows. ABS, as a classification society, is putting forth a significant amount of effort to implement the CFD technology to the advanced strength assessment of modern commercial ships and high-speed naval craft. The main objective of this study is to validate the CFD technology as a seakeeping tool for ship design considering fully nonlinear three-dimensional slamming and green water on deck. The structural loads on a large container carrier were successfully calculated from the CFD analysis and validated with segmented model test measurements.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2017년도 특별논문집
• /
• pp.80-87
• /
• 2017

This paper is related to structural assessment considering the hydroelastic response of ultra large container ships, especially from whipping (bow or stern impacts) and from springing (resonance). In general, whipping contributes both to increased fatigue and extreme loading, while springing does mainly contribute to increased fatigue loading. To evaluate the hydroelastic response quantitatively with high accuracy, numerical code considering hydro-structure coupling was applied and fatigue strength of a 13,100 TEU class containership was verified. The segmented model test and full scale measurement were also needed to assess the effect of whipping and springing on the fatigue and extreme capacity in more realistic way and for verification of the numerical tools. With reference to class rule, fatigue assessment considering springing effect and extreme assessment considering whipping effect were introduced.

• 한국의류학회지
• /
• 제37권6호
• /
• pp.725-736
• /
• 2013

This study segments information users according to depth and variety of use diffusion in order to differentiate between the influence of fashion information spread and diffusions from each segmented group. Data were collected from a fashion community to perform a social network analysis that used UCINET 6.0. Members completed the survey materials and the network materials were utilized in the analysis to test the hypothesis. The segmented groups of information users determined the study results according to use diffusion and the variables that affect them. The variables affecting information diffusion outcomes indicate different significant influence factors on each segmented market. Information variety and complexity represents elevated information reproductions and verbal acceptances from information diffusion outcomes.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.409-421
• /
• 2019

Investigation of hydroelastic responses of high-speed vessels in irregular sea state is of major interest in naval applications. A three dimensional nonlinear time-domain hydroelastic method in oblique irregular waves is developed, in which the nonlinear hydrostatic restoring force caused by instantaneous wetted surface and slamming force are considered. In order to solve the two technical problems caused by irregular sea state, the time-domain retardation function and Proportional, Integral and Derivative (PID) autopilot model are applied respectively. Besides, segmented model tests of a high-speed trimaran in oblique waves are performed. An oblique wave testing system for trimarans is designed and assembled. The measured results of main hull and cross-decks are analyzed, and the differences in distribution of load responses between trimarans and monohull ships are discussed. Finally, from the comparisons, it is confirmed that the present concept for dealing with nonlinear hydroelastic responses of ships in oblique irregular waves is reliable and accurate.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권6호
• /
• pp.371-379
• /
• 2000

The 4-pole linear homopolar synchronous motor (LHSM), so called linear inductor motor, is composed of the figure-of-eight shaped 3-phase armature windings, DC field windings, and the segmented secondary with the transverse bar track. To reduce the calculation time, the simplified 3D finite element model with equivalent reluctance and/or permanent magnet is presented. To obtain a clear understanding, propriety and usefulness of the developed model, we compare with the results of simplified 3D FEA, general 3D FEA and test. Consequently, the results of simplified and 3D FEM analysis are nearly identical, but much larger than that of static test at d-axis armature excitation. Therefore the improved FEA model, such as full model with half slot, is needed for the precise analysis.