• 한국물환경학회지
• /
• 제21권1호
• /
• pp.59-65
• /
• 2005

A phosphate recovery system from artificial wastewater was developed using a completely mixed phosphorus crystallization reactor, in which powdered converter slag was used as a seeding crystal. In preliminary test, the optimal pH range for meta-stable hydroxyapatite crystallization for high phosphorus concentration was observed to be 6.0 to 7.0, which was different from the conventionally known pH range (8.0~9.5) for effective crystallization in relatively low phosphorus concentration less than 5 mg/L. The average phosphorus removal efficiency in a lab-scaled completely mixed crystallization system for artificial wastewater with about 100 mg/L of average $PO_4-P$ concentration was shown to be 60.9% for 40 days of lapsed time. XRD analysis exhibited that crystalline of hydroxyapatite formed on the surface of seed crystal, which was also observed in SEM analysis. In EDS mapping analysis, composition mole ratio (=Ca/P) of the crystalline was found to be 1.78, indicating the crystalline on the surface of seed crystal is likely to be hydroxyapatite. Particle size distribution analysis showed that average size of seed crystal increased from $28{\mu}m$ up to $50{\mu}m$, suggesting that phosphorus recycling from wastewater with high phosphorus concentration can be successfully obtained by using the phosphorus crystallization recovery system.

• Archives of Plastic Surgery
• /
• 제36권5호
• /
• pp.519-524
• /
• 2009

Purpose: This study was conducted to establish the most effective method of cell therapy by comparing and analyzing the level of wound healing after various cell delivery methods. Methods: Human mesenchymal stem cells were administered using 5 different methods on full thickness skin defects which were deliberately created on the back of 4 - week old mice using a 8 mm punch. Different modes of administration, cell suspension, local injection, collagen GAG matrix seeding, fibrin, and hydrogel mix methods were used. In each experiment group, $4{\times}105$ mesenchymal stem cells were administered according to 5 deferent methods, and were not for the corresponding control group. Results: The wound healing rate was fastest in the local injection group. The wound healing rate was relatively slow in the collagen matrix group, however, the number of blood vessels or VEGF increased most in this group. Conclusion: For rapid wound healing through wound contraction, it is advantageous to administer MSC by the local injection method. For the healing process of a wide area, such as a burn, the seeding of cells to collagen matrix is thought to be effective.

• 한국재료학회지
• /
• 제9권12호
• /
• pp.1181-1187
• /
• 1999

diol을 기반으로 하는 Sol-Gel 방법으로 PZT (53/47) 1M sol 용액을 만들어 회전 코팅법으로 Pt/Ti/$SiO_2$/Si 기판위에 코팅하였고 한번 코팅으로 최대 0.9${\mu}m $의 PZT막을 얻었다. PZT는 비강유전성 pyrochlore상을 거쳐 강유전성 perovskite상으로 전이하며 따라서 PZT perovskite seed가 상전이에 미치는 영향을 규명하고자 하였다. 0.2${\mu}m $ 이하의 크기를 갖는 1wt% PZT분말을 propanol용액에 분산시켜 PZT sol 용액에 도입하여 seeded PZT 막을 제조하였다. Seeded PZT막을 열처리한 결과 perovskite상의 생성이 촉진되어 상전이 온도가 50$^{\circ}C$정도 낮아졌다.

• 한국산림과학회지
• /
• 제82권4호
• /
• pp.381-395
• /
• 1993

이 연구는 임도(林道)의 절취(切取)비탈면에서 자연적인 식생천이과정(植生遷移過程)을 구명하고, 효과적인 비탈면 속성녹화공법(速成綠化工法)을 개발하기 위하여, 전국에 개설된 임도(林道) 중 녹화공법(綠化工法)을 적용하지 않은 임도(林道)와 녹화공법(綠化工法)을 적용한 임도(林道)를 대상으로 조사하였고, 파종(播種)실험은 서울대학교(大學校) 산림자원학과(山林資源學科) 묘포(苗圃)에서 실시하였다. 임도(林道)비탈면에 자연적으로 침입하고 있는 식생 중 목본(木本)의 경우는 소나무, 싸리, 산딸기 등이며, 초본(草本)의 경우는 새류, 큰까치수영, 쑥류 등의 순으로 침입하여, 임도개설후(林道開設後) 5년이 경과된 후의 식생피복도(植生被覆度)는 약 30%로 나타났다. 또한 소규모의 토사(土砂)비탈면에서는 등고선상(等高線上) 세구(細溝)내에 산파(散播)를 하고 거적으로 피복(被覆)하는 공법(工法)이 녹화효과(綠化效果)가 매우 우수하였다. 임도(林道)비탈면에서는 임도개설시(林道開設時)에 비탈면 녹화안정공사(綠化安定工事)를 시행하는 것이 효과적(效果的)이며, 그 지역의 자생식물(自生植物)을 활용하여 속성녹화공법(速成綠化工法)을 적용함이 더욱 효과적일 것이다.

• 한국환경복원기술학회지
• /
• 제15권1호
• /
• pp.141-154
• /
• 2012

This study was launched to verify the effective composition of plant species and its management program most suited for the dredged soiled area near Nakdong River Site 14. The improvement methods of planting base and the composition of plants such as silver grass, reed, and some colonies in aesthetic effect were studied. To search the management methods to decrease the confining pressure risen from the burried seeds which would consequently harm the previously seeded plants, experimental construction process was measured on the site. The purpose of this experiment was to figure out which part of the improvement on the plant base has the most significant effect for the revegetation of infertile, dredged soil, to verify the easily seeded, developing plants among seeded plants, and finally, to find the restoration model using plants near the dredged soil around riverside. 8 seeded plants and 23 invaded species were appeared which among the emerged plants, development of Aster yomena MAKINO, Lotus corniculatus var. japonica Regel, Trifolium repens L, and Dianthus longicalyx Miq were proved to be brought up well. Difference risen from the seed composition were not noticeable until 150day since the germination was proceeded mainly by Aster yomena MAKINO. The experimental plot with dredging sand+organic fertilizer method of construction and dredging sand+soil conditioner method showed most development while the effect of the plot with only the soil base of dredging sand stayed low. Another important method for the management of infertile, dredged soil base would be the removal of disturbing species which the experiment showed the tied relationship between the removal of disturbing species and development of seeding plants. Although this study was carried out focused on the Nakdong River Project, the study suggests the general management program that the removal of disturbing species such as Humulus japonicus Sieboid & Zucc. and Pueraria lobata (Willd.) Ohwi in times around rainy season(60days after seedling) would be effective for the easy growth of revegetation plants.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.448-454
• /
• 2001

Low field electron emission from novel carbon based cold cathodes is reported. The cathodes consisted of a layer of nanoseeded diamond and an over layer of nanocluster carbon films. The nanoseeded diamond was first coated on to thesubstrate. The nanocluster carbon films were then deposited on the nanocrystalline diamond coated substrates using the cathodic arc process at room temperature. The heterostructured microcathodes were observed to exhibit electron emission currents of 1 $\mu$A/cm$^2$ at fields as low as 1.5 to 2V/$\mu$m. The effect of the nanoseeded diamond size and concentration and the properties of different nanocluster carbon films on emission characteristics is presented.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.167-170
• /
• 1998

To apply diamond films in microelectromechanical systems(MEMS), it is necessary to develop the patterning technologies of diamond films in the micrometer scale. In this paper, three different kinds of technologies for patterning CVD diamond films carried out by us were demonstrated: selective growth by improved diamond nucleation in DC bias-enhanced microwave plasma chemical vapor deposition (MPCVD) system, selective growth of seeding using diamond-particle-mixed photoresist, and selective etching of oxygen ion beam using Al as the mask. It was show that high selectivity and precise patterns had been achieved, and all the processes were compatible with IC process.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2001년도 학술대회 논문집
• /
• pp.139-141
• /
• 2001

YBCO superconductors were prepared by top-seeded melt growth process using various numbers of seeds. The levitation forces and trapped magnetic fields of the top surfaces of the samples were measured using Nd-B-Fe permanent magnets It was found that the processing time was greatly reduced by multiple seeding, but the properties were decreased as the number of seeds was increased. The degradation of the properties is attributed to the presence of the nonsuperconducting phases at the grain boundaries as result of the entrapment of a residual melt at grain boundaries during melt processing.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 추계 학술논문 발표대회
• /
• pp.146-147
• /
• 2013

The oyster shells of about 240,000 tons have been annually produced in south coast of South Korea. However, about 25% of the oyster shells (60,000tons) was recycled as oyster seeding and fertilizer due to the limited amount of consumption for such purposes. The stored amount of oyster shell in the fertilizer manufacturing company is overfilled, and thus cannot accept any more of the waste oyster shells. As a result, landfill and illegal dumping of waste oyster shells have become an increasingly serious issue since 2011. In this research, the problems generated by the oyster shells were investigated through surveying activities. One of the possible alternative solutions that can process large amount of waste economically was found to be the application of oyster shells as a construction materials.

• 설비공학논문집
• /
• 제17권12호
• /
• pp.1154-1160
• /
• 2005

A panoramic-PIV system has been constructed for the analysis of the airflows in a room. Smoke is used as seeding particles and are visualized by a pulsed laser (Nd-Yag, 120 mJ). Panoramic images have been obtained by an image composition process using the two images obtained by the two cameras $(1k\times1k)$ that are viewing the wide measurement areas. Velocity vector fields have been obtained by the grey-level cross-correlation PIV method. Three room models $(L{\times}W{\times}H[mm^3],\;500\times500\times250,\;350\times350\times175,\;250\times250\times125)$ have been tested. The experimental results have proven that the constructed panoramic-PIV system can be used as a useful tool for analyzing the airflow characteristics in the room models.