• Korean Journal of Materials Research
• /
• v.34 no.1
• /
• pp.1-11
• /
• 2024

This research investigated the preparation of activated carbon derived from Krabok (Irvingia malayana) seed shells to improve the quality of crude glycerol obtained during biodiesel production. The activated carbon was prepared using a dry chemical activation method with NaOH, utilizing an innovative biomass incinerator. The results revealed that the resulting KC/AC-two-step exhibited favorable physicochemical adsorption properties, with a high surface area of 758.72 m²/g and an iodine number of 611.10 mg/g. These values meet the criteria of the industrial product standard for activated carbon No. TIS 900-2004, as specified by the Ministry of Industry in Thailand. Additionally, the adsorption efficiency for methylene blue reached an impressive 99.35 %. This developed activated carbon was then used to improve the quality of crude glycerol obtained from biodiesel production. The experimental results showed that the KC/AC-two-step increased the purity of crude glycerol to 73.61 %. In comparison, commercially available activated carbon (C/AC) resulted in a higher crude glycerol purity of 81.19 %, as analyzed by the GC technique. Additionally, the metal content (Zn, Cu, Fe, Pb, Cd, and Na) in purified glycerol using KC/AC-two-step was below the standards for heavy metals permitted in food and cosmeceuticals by the Food and Drug Administration of Thailand and the European Committee for Food Contact Materials and Articles. As a result, it can be inferred that Krabok seed shells have favorable properties for producing activated carbon suitable as an adsorbent to enhance crude glycerol purity. Furthermore, the improved crude glycerol from this research has potential for various industrial applications.

• Journal of Korean Society of Forest Science
• /
• v.109 no.1
• /
• pp.41-49
• /
• 2020

In this study, the effect of seed pre-treatments and pellet coating materials to enhance the efficiency of large-scale propagation of Aster koraiensis seeds were investigated. Seeds were immersed in water for one day, and only those that sank were used for pre-treatment to use filled seeds. Pre-treatments were divided into hormone treatments, with gibberellic acid (GA₃; 200 and 500 ppm) and 24-epibrassinolide (10^-6, 10^-7, and 10^-8M), and priming with potassium nitrate (100 mM of KNO₃). To produce pellet-coated seeds, pellet materials (DTCS or DTK) were applied to control (unprimed) and primed seeds with binders (PVA or CMC). The maximum germination percent (GP) of seeds before pellet coating was 65% (with the priming treatment), and there was no difference in the GP of seeds among hormone treatments. For seeds sown in a growth chamber on filter paper, GP was 41% for control (unprimed/uncoated) seeds, 65% for uncoated primed seeds, 71% for DTCS/PVA-pellet-coated seeds, and 42% for DTK/CMC-pellet-coated seeds. Seeds that were primed first and then pellet-coated showed greatly improved GP, mean germination time (MGT), and germination rate than seeds that were only pellet-coated. For seeds sown in commercial soil in a greenhouse, control seeds had a GP of 27%, whereas primed seeds had the highest GP (58%), and their MGT and GT were 9.4 days and 7.0%·day, respectively. In addition, DTK/PVA-pellet-coated seeds (40%) also had a GP higher than the control (27%), and their MGT was 15-27 days. For seeds sown in sandy-loam soil in a greenhouse, unprimed-pellet-coated seeds and primed-pellet-coated seeds both had GPs ranged of 39%, which were lower than that of control seeds. In general, the seeds that were pellet-coated with DTK had a higher GP than those pellet-coated with DTCS. Furthermore, the MGT of unprimed-pellet-coated seeds was 15.0-19.8 days, which was longer than the MGT of primed-pellet-coated seeds. These results suggest that priming enhances seedling emergence of Aster koraiensis seeds. Moreover, when priming is combined with pellet coating, DTK is a more suitable pellet material than DTCS, and PVA and CMC are equally suitable adhesives.

• Journal of Life Science
• /
• v.23 no.9
• /
• pp.1079-1087
• /
• 2013

Speed germination success and robust vegetative growth of citrus rootstock through improved sowing methods and fertilizer inputs offer the usage of root system for the citrus. The current study evaluated the influence of seed coat removal and different fertilizer concentrations on plant germination and plant growth of spontaneous rootstock siblings. Decoated and coated seeds of diploid and tetraploid plants were sown in tubes. Commercial fertilizer concentrations of 0, 2, 4, 6, 8 and $10g{\cdot}l^{-1}$ were added. The experimental layout followed a randomized block $2{\times}6$ factorial design (seed coat removal ${\times}$ fertilizer concentration) for each rootstock. Fertilizer concentrations were 0, 10, 20 and $30g{\cdot}l^{-1}$ of the fertilizer for the resistance of the strength on the salt level. The germination rate of seeds without testa sown in vitro was improved (67-80%) compared to that of nontreated seeds. The eventual tree height of the seeds without testa in the diploid group was increased due to higher fertilization compared to that in the nontreated group. The removal of seed testa promoted the seed germination of both diploid and tetraploid trifoliate orange and resulted in greater height. Their vegetative development was also increased due to the increased fertilization of the rootstock. The Fv/Fm value for the diploid plants was 0.4 and 0.8 for the tetraploid ones under salt stress after 11 days of treatment. The removal of seed testa may improve the seed germination of trifoliate orange. Tetraploid trifoliate orange appears to possess resistance to salt stress compared to the diploid variety.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.67 no.2
• /
• pp.95-110
• /
• 2022

This study was conducted to determine the extent to which climate change is expanding areas in which barley can be successfully cultivated. In 2019 and 2020, we collected data on areas that had requested certified seeds from the Korea Seed and Variety Service to determine potential cultivation areas. In addition, we surveyed the growth and yield of different types of barley in fields. Certified seeds of hulled and dehulled barley were requested by farmers across Korea from the Korea Seed and Variety Service in both years. Areas that were provided with certified seeds were considered potential barley cultivation areas. The varieties and use rates of certified seeds varied based on the barley type and region. For example, certified seeds of dehulled barley in 2019 and 2020 were not used in some areas, whereas in others, these seeds constituted 100% of the seeds sown for barley crops. In 2019 and 2020, the average sowing days in Korea were from October 17 to November 9 for dehulled barley, October 26 to November 13 for hulled barley, October 19 to November 5 for malting barley, and October 3 to November 1 for naked oats. Thus, the sowing days of the barley types varied depending on the area and year they were used. For example, in the case of hulled barley in Jeonnam, some farmers sowed until December 12. The yield per 10 a of barley cultivation was typically higher in the main production areas than in the cultivation limit areas. In extreme cases, harvest was impossible in some cultivation limited areas, such as Gangwon-do. Based on the current 20-year January minimum average temperature (JMAT) in Korea (2002-2021), climate change scenarios suggest that barley cultivation is feasible, provided that the minimum temperature in January is no lower than -10℃, -8℃, and -4℃ for hulled barley, dehulled barley, and for malting barley and naked oats, respectively. Additionally, cultivation of barley across South Korea seems feasible based on data on certified barley seeds by area. Although both JMAT and certified seed data suggest that barley cultivation across Korea is feasible, our survey results of barley growth and yield showed that harvest was impossible in certain cultivation areas, such as Gangwon-do. Therefore, climate change scenarios related to the cultivation limits of different barley types need to be re-estimated by factoring in survey data on the growth and yield of crops within those cultivation areas.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.215-215
• /
• 2017

The preference for domestic cereal crop of Setaria Italica has been increased with the recent interest in healthy foods. However, the productivity of Korean domestic produce, which has been decreasing due to the lack of cultivation technology and the low rate of mechanization during cultivation. Increase of germination ability will have a positive effect on the cultivation by reducing the labor of the manpower consuming and weeding work. Therefore, red light, ultrasonication, liquid priming and liquid smoke treatment that are effective for the germination of the seeds evaluated. The seeds of 1.4mm or more were used for the experiment. The priming solution used in the experiment was 1% $KH_2PO_4$ (74mM). During the priming, the light treated seeds at 2000 lux for 15, 30, 60 and 120 minutes. Ultrasonicationd treatment was performed for 5, 10, and 20 minutes at exposures of 60%, 80%, and 100% of ultrasound up to 21.6 kHz during priming. Light or ultrasound treated seeds transferred to priming treatment at $15^{\circ}C$ for 24 hours. The treatment of the liquid smoke was divided into the treatment of the liquid smoke alone and the treatment of the liquid smoke with the priming. The liquid smoke alone was diluted with distilled water without priming solution and the treatment of the liquid smoke was diluted with the salt priming solution. Both treatments were performed at 0.0%, 0.5%, 1.0%, 5.0%, and 10.0% of the liquid smoke (pH7) concentration at $15^{\circ}C$ for 6 hours. After each treatment, the seeds were dried to moisture content ranged 5-8% at $25^{\circ}C$ for 24 hours. All treatments showed better results than the non-treated control. Light treatment for 120 minutes improved for germination percentage (GP), Germination uniformity (GU) and heath seed percentage (HS). Ultrasonication treatment was most effective when treated with ultrasound at 21.6 kHz for 5 minutes in all germination characteristics. Ten % of the liquid smoke increase in 92% GP, 1.8 days MGT, $54%{\cdot}day^{-1}GR$, 0.76 GU and 88% HS comparing to non-treated control (72% GP, 2.3 days MGT, $45%{\cdot}day^{-1}GR$, 1.48 GU, and 63 % HS). This study showed that it is possible to obtain high germination by adding liquid smoke treatment to the seeds supplied to the farmers. The efficacy of light, ultrasonication, inorganic salt priming, and liquid smoke treatment on the seeds found in the experiment will be a positive alternative to labor force problems in the cultivation by improving germination.

• Journal of Environmental Science International
• /
• v.31 no.3
• /
• pp.265-274
• /
• 2022

Lipoxygenase is an enzyme, mainly produced by plants, capable of converting unsaturated fatty acids to fatty acids. It has vast application potential in the food, pharmaceutical and agricultural industries. The aim of this study was to isolate novel lipoxygenase-producing bacteria from the environment and to investigate the lipoxygenase enzymatic properties for industrial production. The strain, NC1, isolated from cultivation soils, was identified as Bacillus subtilis based on the phenotypic characteristics and 16S rRNA gene sequencing. This strain formed a pink color around the colony when cultured on indamine dye formation plates. The production of lipoxygenase by B. subtilis NC1 was influenced by the composition of the medium and linoleic acid concentrations. The optimum temperature and pH for lipoxygenase activity was determined to be 40 ℃ and pH 6, respectively. The enzyme showed relatively high stability at temperatures ranging from 20-50 ℃ and acid-neutral regions. In addition, the lipoxygenase produced by B. subtilis NC1 was able to degrade commercially available oils including sunflower seed oil and Perilla oil. In this study, a useful indigenous bacterium was isolated, and the fundamental physicochemical data of bacterial lipoxygenase giving it industrial potential are presented.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.417-421
• /
• 2006

In this study, colloidal Ag solution was spouted on the surface of the inorganic pigment using the hybridizer system and the spray nozzle. Then, the surface of the inorganic pigment was modified by titanium dioxide in order to possess antibacterial ability. Nano-sized colloidal Ag was made by using a seed sol method in this study. It was confirmed that the size of particle per unit weight becomes enlarged, as the addition of $AgNO_{3}$ increased, and as the time of reaction increased, in the manufacturing process of nano-sized colloidal Ag. The antibacterial measurement of the inorganic pigment showed that the growth of fungus was reduced as the reaction time increased. It was measured that the antibacterial activity was excellent at fixed time frame, after the antibacterial ability appeared in $5{\sim}7$ hours of the antibacterial inoculation experiment. The experiment of titanium dioxide's Photocatalyst effect showed $60{\sim}70%$ efficiency in about 80 minute reaction time of the dissolution results regarding measurements of benzene. It was shown that more than 90% of the dissolution efficiency was achieved in the reaction time of about 30 minute.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.3
• /
• pp.252-258
• /
• 2013

The quality and quantity of food organisms in fish seed production are important. The marine microalgae Nannochloropsis oculata are used as initial food organisms in the field. We investigated the effects of salinity (0, 10, 20, 30, 40 and 50 psu) on the lipid and fatty acid composition of N. oculata. Cultivation of N. oculata at varying salinities showed the highest growth rate at 20 psu. Total lipid content ranged from 17.26 to 18.63% at salinities from 0 to 50 psu). The nonpolar lipid content increased markedly at 30 psu and was highest at 15.55%. The polar lipid content was lowest at 30 psu, by 84.45%. It was also found that the omega-3 and EPA contents were inversely proportional to salt concentration. For the polar and nonpolar lipid compositions, there was no significant effect of salinity. Omega-3 polyunsaturated fatty acid content especially the content of EPA in the seawater larvae is the essential fatty acid in this food organism. It is thus advantageous to culture N. oculata at 20 psu.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2007.04a
• /
• pp.13-17
• /
• 2007

The green roof industry have been developed with Europe, North America, Japan. At the same time, being recognized the important of green roofs in domestic industry and we just start to develop the relative technology as analyzing the future direction of advanced technology. Recently, local self-government including Seoul support the system for green roof which provide 50% of working expenses form of Matching Fund by Seed Money. As years go by, the number of build up the green roof has gradually increased to be proved. At this result caused by management of system in government, unstructured construction system, low development of support technology. In this study as analyzing the present of technical development, supporting by law and system for the advanced waterproofing and root penetration resistance technology, we suggest the development direction of it to be compared with application advanced technology and we could strengthen the international competitiveness to be industrialized the green roof considering system, technology, human infrastructure.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.15 no.4
• /
• pp.103-110
• /
• 2019

A patent contains detailed information of the developed technology and is published to the public. Thus, patents can be used to overcome the limitations of traditional technology trend research and prediction techniques. Recently, due to the advantages of patented analytical methodology, IP R&D is carried out worldwide. The patent is big data and has a huge amount, various domains, and structured and unstructured data characteristics. For this reason, there are many difficulties in collecting and researching patent information. Patent research generally writes the Search formula to collect patent documents from DB. The collected patent documents contain some noise patents that are irrelevant to the purpose of analysis, so they are removed. However, eliminating noise patents is a manual task of reading and classifying technology, which is time consuming and expensive. In this study, we propose a model that automatically classifies The Noise patent for efficient patent information research. The proposed method performs Patent Embedding using Word2Vec and generates Noise seed label. In addition, noise patent classification is performed using the Random forest. The experimental data is published and registered with the USPTO among the patents related to Ocean Surveillance & Tracking Network technology. As a result of experimenting with the proposed model, it showed 73% accuracy with the label actually given by experts.