• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1159-1161
• /
• 1993

This paper may be presented the carrier oscillation properties for the varistor fabricated by a new method of three-composition seed grain, in order to analyze the behavior of carriers at the its equivalent circuit model. The oscillation phenomena of carriers appeared from current-voltage characteristics under knee voltage is shown by the transient flow of non trapped carriers group in the trap level of intergranular layer, surface state and/or depletion layer. However, Current oscillation phenomena is hardly shown in the high electric field. The injected carriers from both electrodes are directly flowed from the conduction band of forward biased grain through the intergranular layer into the reverse biased grain, because the trap level in the electric field above the knee voltage is mostly filled.

• 한국약용작물학회지
• /
• 제2권1호
• /
• pp.32-37
• /
• 1994

본 연구는 시호 종자를 파종했을 때 발아율이 낮고 발아 소요기간이 길어 입모확보가 문제점으로 대두되어 발아율을 향상시키고 단기(短期) 동시 발아시킬 방안을 모색하고자 시호 종자의 발아특성에 대하여 시험한 결과를 요약하면 다음과 같다. 1. 시호종자의 크기는 입경 $2.0{\sim}3.0mm$ 범위이었으며, 평균입경은 삼도시호가 3.0mm 재래시호가 3.1mm이었다. 대립종자일수록 발아기간이 짧고 발아율이 높았다. 2. 시호 종자의 선종에 알맞는 비중은 1.05로 판단되었으며 비중선에 의해 70% 이상의 발아율을 기대할 수 있었다. 3. 시호 종자의 등숙기간은 최소 60일 이상되어야 하며 80일간의 저온 층적 처리에 의해 발아율은20% 이상 증가하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2000년도 High Temperature Superconductivity Vol.X
• /
• pp.293-297
• /
• 2000

Multiseeding with (100)/(100) grain junctions of top-seeded melt growth (TSMG) processed YBCO superconductors was studied. The effect of the number of seeds and the distance between two seeds on the levitation forces and the trapped magnetic fields of the TSMG-processed YBCO samples was investigated. Multiple seeding shortened the processing time for the fabrication of TSMC-processed YBCO superconductors. The large magnetic field was trapped at the grain junction when two seeds was placed without spacing, while the amount of the magnetic field decreased when the seed distance increased. This is attributed to the increased amount of the residual melt phases around the grain junctions.

• 한국작물학회지
• /
• 제45권4호
• /
• pp.245-250
• /
• 2000

This study was conducted to analyze the responses of some agronomic traits to the different cultural environments and relations among the agronomic traits for selecting sesame varieties with higher cultural stabilities. The indexes for stability parameters measured were coefficient of variability, heritabilities, genetic correlations and path coefficients of agronomic traits according to locations and years in Korea. The heritabilities of agronomic traits showed different by locations and years. Number of seeds per capsule and 1000 seeds weight showed higher heritabilities, but stem length and seed weight per plant showed relatively lower heritabilities. Average heritabilities of some agronomic traits in 1998 were comparatively higher than those of 1999. Of six areas, Jinju area showed biggest coefficient of yield variability in 1998-1999. Iksan and Taegu areas showed higher heritabilities in 1998, but Iksan and Jinju areas showed lower heritabilities in 1999. Genetic correlations were slightly higher than corresponding phenotypic correlations. Stem length showed positive genetic correlation with the number of capsules per plant, and seed weight per plant and the number of capsule per plant showed positive genetic correlation with seed weight per plant. On the analysis of path coefficients, stem length and number of capsules effected highly on grain yield. Great regional variations were observed on the effects of agronomic traits on grain yield. Higher direct effects of stem length on grain yield were observed at Suwon, Chungwon, Taegu, Jinju and Naju areas, but in Iksan area was observed higher direct effect of the number of capsules per plant on grain yield in 1998. In 1999, higher direct effect of stem length on grain yield was observed at Chungwon and Suwon areas. Iksan and Taegu areas were also observed higher direct effect of the number of capsule per plant on grain yield.

• 한국작물학회지
• /
• 제46권6호
• /
• pp.429-433
• /
• 2001

경종조건에 따른 벼 이형주의 발생양상과 특성은 다음과 같다. 1.벼 이형주의 발생량은 종자의 자가 채종년수가 증가할수 록 많았고, 직파재배 포장에서 이앙재배 포장보다 2배 가량 많았다. 2. 재배벼의 재배포장에 장립적미와 단립적미를 인위적으로 산파 하였을 때 담수표면산파 재배에서 기계이앙 재배보다 발생량이 많고 간장이 길고 주당 유효경수가 많았으며, 장립적미가 단립적미보다 이런 특성들을 많이 지녔다. 3. 이앙재배 포장에서 이형주가 재배벼의 포기 밖에서 발생하는 비율은 농가관행재배의 경우 0∼6%인 반면, 장립적미와 단립적미를 인위적으로 산파하였을 때는 70.6∼91.1% 이기 때문에 농가포장에서 발생하는 이형주군의 대부분은 종자흔입에 의해 발생하는 것으로 보아진다.

• 한국작물학회지
• /
• 제28권2호
• /
• pp.211-215
• /
• 1983

수집된 재래의 유색대두종을 일률적인 재배조건하에서 종실특성 변이와 종실종군별 생육진전 및 수량형질 특성을 조사한 결과 다음의 결론을 얻었다. 1. 유색대두 수집종들은 100립중을 기준으로 하여 20gr 이하의 소립중, 20-25gr의 중립중, 25-30gr의 대립종 및 30gr 이상의 특대립종 등 4개군으로 나눌 수 있었다. 2. 종실크기에 관련된 요인중 종실장과 종실폭의 변이는 종실후보다 크게 나타났다. 3. 종실중과 경중 및 주당협수 등의 형질들은 변이계수에서 생육일수나 결과일수 등의 형질보다 큰 경향이었다. 4. 생육일수와 성숙일수 및 개화시기는 립중군별간에 유의한 차이를 나타내지 않았다. 5. 개화기와 성숙일수는 경장 및 경중과 정의 상관관계를, 경장과 경중은 수량형질과 정의 상관을 나타내었으며, 주당협수는 100립중과 부의 상관을, 또한 수량과는 정의 상관관계를 나타내었다.

• 한국식물병리학회:학술대회논문집
• /
• 한국식물병리학회 2003년도 정기총회 및 추계학술발표회
• /
• pp.119.2-120
• /
• 2003

Seed-borne fungal pathogens on rice seeds were investigated in order to evaluate their effect on rice grain quality. Rice seeds of two cultivars, Ilmibyeo and Daesanbyeo were collected from 27 areas of Korea and the fungal parasites on seeds were isolated by using a blotter method. Isolation frequency and number of species were varied from collection areas of seed samples. A total 13 species of fungi were identified from the seeds. Among them, Altemana alternata was the most frequent over the country. Bipoiaris oryzae most commonly from Gyeongbuk and Jeonbuk, Alternaria padwickii from Jeonbuk, and Nigrospora oryzae from Choongnam. However Bipolaris. oryzae, Alternaria padwickii, and Nigrospora oryzae were the most frequently isolated fungi from Gyeongbuk and Jeonbuk, and Chungnam, respectively. B. oryzae, A. alternata, A. padwickii, and N. oryzae were dominants on Ilmibyeo showing 10.3％, 10.2％, 5.2％, and 5.2％ infection rate, respectively. While, N. oryzae, A alternata, and Cladosporium sp. were most frequently isolated fungi from Deasanbyeo revealing 15.1％, 9.6％, and 7.5％ infection rate, respectively. These fungi inhabiting on hulls or endosperms of rice seed might be considered as potential factors decreasing rice grain quality. Further investigation of the fungi on grain rice quality are undergoing.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.13-22
• /
• 2010

The unique features of spark plasma sintering process are the possibilities of a very fast heating rate and a short holding time to obtain fully dense materials. $\beta$-SiC powder with 0, 2, 6, 10 wt% of $\alpha$-SiC particles (seeds) and 4 wt% of Al-B-C (sintering aids) were spark plasma sintered at $1700-1850^{\circ}C$ for 10 min. The heating rate, applied pressure and sintering atmosphere were kept at $100^{\circ}C/min$, 40 MPa and a flowing Ar gas (500 CC/min). Microstructural development of SiC as function of seed content and temperature during spark plasma sintering was investigated quantitatively and statistically using image analysis. Quantitative image analyses on the sintered SiC ceramics were conducted on the grain size, aspect ratio and grain size distribution of SiC. The microstructure of SiC sintered up to $1700^{\circ}C$ consisted of equiaxed grains. In contrast, the growth of large elongated SiC grains in small matrix grains was shown in sintered bodies at $1750^{\circ}C$ and the plate-like grains interlocking microstructure had been developed by increasing sintering temperature. The introduction of $\alpha$-SiC seeds into $\beta$-SiC accelerated the grain growth of elongated grains during sintering, resulting in the plate-like grains interlocking microstructure. In the $\alpha$-SiC seeds added in $\beta$-SiC, the rate of grain growth decreased with $\alpha$-SiC seed content, however, bulk density and aspect ratio of grains in sintered body increased.

• 한국작물학회지
• /
• 제59권4호
• /
• pp.427-434
• /
• 2014

1. 생산지에 따라 벼 종자의 수발아립률 차이가 컸던 호품벼의 출아율과 발아율을 조사한 결과, 수발아율 8%인 시료는 수발아율이 1%인 시료에 비해 발아율과 출아율, 종자활력이 30% 낮았다. 2. 수발아율이 높은 시료는 수발아립의 변색 정도가 심하고 미발아율과 부패율이 높았다. 수발아립은 배가 돌출하고, 변색된 배유와 곰팡이 감염이 관찰되었으며 배유의 1/2이상이 변색된 종자는 발아율이 매우 낮았다. 3. 종자의 발아 진행정도에 따라 현미의 변색이 심해졌는데, 싹이 3 mm이상일 경우 배유의 1/2정도가 변색되었다. 4. 발아 종자는 싹이 3 mm이상일 때부터 재발아율이 크게 떨어졌으며 퇴화촉진처리 후 발아율의 감소가 더 컸다. 특히 퇴화촉진처리한 발아 종자는 싹이 2 mm부터 종자활력이 크게 감소하였다. 결론적으로 수발아 발생이 심할수록 파종기 발아율과 출아율의 감소가 크고, 수발아가 3 mm이상 발생하면 발아율이 크게 저하될 것으로 생각된다. 또한 수발아는 동일 품종과 동일 지역에서도 포장 간 차이가 크게 발생할 수 있으므로 재배관리에 주의해야 한다.

• 한국재료학회지
• /
• 제22권4호
• /
• pp.190-194
• /
• 2012

The formation of high-quality polycrystalline silicon (poly-Si) on relatively low cost substrate has been an important issue in the development of thin film solar cells. Poly-Si seed layers were fabricated by an inverse aluminum-induced crystallization (I-AIC) process and the properties of the resulting layer were characterized. The I-AIC process has an advantage of being able to continue the epitaxial growth without an Al layer removing process. An amorphous Si precursor layer was deposited on Corning glass substrates by RF magnetron sputtering system with Ar plasma. Then, Al thin film was deposited by thermal evaporation. An $SiO_2$ diffusion barrier layer was formed between Si and Al layers to control the surface orientation of seed layer. The crystallinity of the poly-Si seed layer was analyzed by Raman spectroscopy and x-ray diffraction (XRD). The grain size and orientation of the poly-Si seed layer were determined by electron back scattering diffraction (EBSD) method. The prepared poly-Si seed layer showed high volume fraction of crystalline Si and <100> orientation. The diffusion barrier layer and processing temperature significantly affected the grain size and orientation of the poly Si seed layer. The shorter oxidation time and lower processing temperature led to a better orientation of the poly-Si seed layer. This study presents the formation mechanism of a poly seed layer by inverse aluminum-induced crystallization.