• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.1
• /
• pp.43-53
• /
• 2020

The test conducted in this study was carried out for three years from 2013 to 2015 to investigate the optimal level of seeding amount and nitrogen fertilizer application to cultivate and produce the seeds of rye in Jangsu province, Jeollabuk-do. The variety of forage rye used in this experiment was 'Gogu', developed by National Institute of Crop Science, Suwon, Korea in 2004. The seeding rate was four levels (3, 5, 7 and 9 kg 10a^-1, respectively) while nitrogen fertilized with respective amounts of 0, 3, 6, and 9 kg 10a^-1. In Jangsu, the number of spike per m² and lodging ratio were increasing, while fertility rate, 1 liter weight, 1000-grain weight and seed productivity were decreased by increasing of seeding rate from 3 kg 10a^-1 to 9 kg 10a^-1. There was an increase in the number of spike per m², culm lengh, the number of grain per spike, lodging ratio and seed productivity, while productiove tiller, 1 grain weight, and 1 liter weight were decreased by increasing nitrogen fertilizer level from 3kg 10a^-1 to 9 kg 10a^-1. The best seeding rate and nitrogen fertilizer level for rye seed production were 5 kg and 6 kg 10a^-1, respectively, considering plant lodging, seed and fertilizer reduction and the prevention of pollution by excess fertilization.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.22 no.2
• /
• pp.89-97
• /
• 2020

This experiment was conducted at Sancheong from 2013 to 2015. The objective of this study was to establish the seeding rate, and to clarify the optimum nitrogen fertilizer level for rye seed production in the southern area of Korea. We employed Korean rye cultivar 'Gogu' in this test. The experimental design was a split-plot design with three replications. A split-plot design was used with three seeding levels (3, 5, and 7 kg 10 a^-1) on the main plots and other treatments fully randomized in sub-plots. A factorial arrangement of treatments included three different nitrogen fertilizer levels (0, 3, 6, and 9 kg 10 a^-1). The grain yields of rye affected by increasing the seeding rate. The number of spike per m² and immature grain weight was increasing, while the fertility rate and the number of grain per spike were decreased as seeding rate were increased from 3 kg 10 a^-1 to 7 kg 10 a^-1. The percentage of a productive tiller, 1-liter weight, and 1000-grain weight also decrease by increasing seeding but the grain yields of rye had less effect. There was an increase in the number of spike per m², the number of grain per spike, and grain yields as nitrogen fertilizer level was increased from 0 kg 10 a^-1 to 9 kg 10 a^-1 and followed a delaying heading and an increasing lodging of the plant. But grain yields did not affected by the interaction of seeding rate × nitrogen fertilizer levels. The best seeding rate and nitrogen fertilizer level for rye seed production were 5 kg and 3 kg 10 a^-1, respectively, considering seed and fertilizer reduction and the prevention of pollution by excess fertilization.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1998.05a
• /
• pp.26-27
• /
• 1998

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2005.11a
• /
• pp.441-441
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.05a
• /
• pp.310.1-310.1
• /
• 2004

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.2
• /
• pp.75-81
• /
• 2007

Densification and grain growth have been investigated in 5 wt% $U_3O_8$ seeded $UO_2$ and compared with those of the common $UO_2$ pellet. $UO_2$ compacts and $U_3O_8$ seeded $UO_2$ compacts were sintered at $1300{\sim}1700^{\circ}C$ for 0 h to 4 h. Density and grain size of the sintered pellets were measured by the water immersion method and the image analyzer, respectively. The seeded pellet has a slightly lower density during the intermediate sintering stage. However, the difference of density between two pellets decreases to about 0.5%TD with increasing the sintering temperature. The grain size of the two pellets is similar until $1600^{\circ}C$ but that of the seeded pellet rapidly increases with increasing the sintering temperature.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.684-689
• /
• 2019

Single crystals, which have complexed composition, are fabricated by solid state grain growth. However, it is hard to achieve stable properties in a single crystal due to trapped pores. Aerosol deposition (AD) is suitable for fabrication of single crystals with stable properties because this process can make a high density coating layer. Because of their unique features (nano sized grains, stress inner site), it is hard to fabricate single crystals, and so studies of grain growth behavior of AD film are essential. In this study, a $BaTiO_3$ coating layer with ${\sim}9{\mu}m$ thickness is fabricated using an aerosol deposition method on (100) and (110) cut $SrTiO_3$ single crystal substrates, which are adopted as seeds for grain growth. Each specimen is heat-treated at various conditions (900, 1,100, and $1,300^{\circ}C$ for 5 h). $BaTiO_3$ layer shows different growth behavior and X-ray diffraction depending on cutting direction of $SrTiO_3$ seed. Rectangular pillars at $SrTiO_3$ (100) and laminating thin plates at $SrTiO_3$ (110), respectively, are observed.

• Plant Resources
• /
• v.5 no.2
• /
• pp.118-123
• /
• 2002

In order to obtain the genetic information on the quantitative characters of black seeded soybeans, which would be needed to improve selection efficiency for breeding high yielding genotype, 45 varieties of black seeded soybeans collected in Chonnam, Korea were grown and variations of several important characters were observed. Heritability of each observed character, phenotypic and genotypic correlations among the characters and contribution of each yield component on grain yield through path coefficient analysis were estimated. Both number of pods per plant and 100-seed weight showed not only high heritability but also highly significant phenotypic and genotypic correlation with seed yield, and hence it was desirable to select plants with more number of pods per plant and higher 100-seed weight than raise seed yield of black seeded soybeans collected in Chonnam. In addition, number of pods per and 100-seed weight were proved to be the most influential variables on the viability of seed yield by path coefficient analysis. Since these showed the high heritability of number of pods per plant, selection of plants with higher 100-seed weight would be more efficient for breeding high yielding genotype.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2023.04a
• /
• pp.157-157
• /
• 2023

Pre-harvest sprouting (PHS) in rice (Oryza sativa L.) is one of the main problems associated with seed dormancy. PHS causes yield loss and reduction of grain quality under unpredictable humid conditions at the ripening stage, thus affecting the economic value of the rice crop. To resolve this issue, it is important to understand the molecular mechanism underlying seed dormancy in rice. Recent studies have shown that seed dormancy is affected by a large number of genes associated with plant hormones. However, the effect of heat stress on seed dormancy and plant hormones is not well understood. In this study, we compared the PHS rate as well as the transcriptome and small RNAome of the seed embryo and endosperm of two different accessions of rice, PHS-susceptible rice (low dormancy) and PHS-resistant rice (high dormancy) under three different maturation stages. We identified and verified the candidate genes associated with seed dormancy and heat stress-related responses in rice using quantitative real-time PCR. We newly discovered hormone-related genes, heat shock protein-related genes, and miRNAs potentially involved in PHS. These findings provide a foundation for understanding the dynamics of transcriptome and small RNAome of hormone- and heat stress-related genes, which affect PHS during seed maturation.

• Journal of Magnetics
• /
• v.21 no.1
• /
• pp.35-39
• /
• 2016

$Cr_{100-x}Ti_x$ amorphous texture-inducing layers (TIL) were investigated to realize highly (002) oriented $L1_0$ FePt-C granular films through hetero-epitaxial growth on the (002) textured bcc-$Cr_{80}Mn_{20}$ seed layer (bcc-SL). As-deposited TILs showed the amorphous phase in Ti content of $30{\leq}x(at%){\leq}75$. Particularly, films with $40{\leq}x{\leq}60$ kept the amorphous phase against the heat treatment over $600^{\circ}C$. It was found that preference of the crystallographic texture for bcc-SLs is directly affected by the structural phase of TILs. (002) crystallographic texture was realized in bcc-SLs deposited on the amorphous TILs ($40{\leq}x{\leq}70$), whereas (110) texture was formed in bcc-SLs overlying on crystalline TILs (x < 30 and x > 70). Correlation between the angular distribution of (002) crystal orientation of bcc-SL evaluated by full width at half maximum of (002) diffraction (FWHM) and a grain diameter of bcc-SL indicated that while the development of the lateral growth for bcc-SL grain reduces FWHM, crystallization of amorphous TILs hinders FWHM. $L1_0$ FePt-C granular films were fabricated under the substrate heating process over $600^{\circ}C$ with having different FWHM of bcc-SL. Hysteresis loops showed that squareness ($M_r/M_s$) of the films increased from 0.87 to 0.95 when FWHM of bcc-SL decreased from $13.7^{\circ}$ to $3.8^{\circ}$. It is suggested that the reduction of (002) FWHM affects to the overlying MgO film as well as FePt-C granular film by means of the hetero-epitaxial growth.