• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.59.1-59.1
• /
• 2010

Aluminum-induced crystallization (AIC) of amorphous silicon (a-Si) is studied with the structure of a glass/Al/$SiO_2$/a-Si, in which the $SiO_2$ layer has micron-sized laser holes in the stack. An oxide layer between aluminum and a-Si thin films plays a significant role in the metal-induced crystallization (MIC) process determining the properties such as grain size and preferential orientation. In our case, the crystallization of a-Si is carried out only through the key hole because the $SiO_2$ layer is substantially thick enough to prevent a-Si from contacting aluminum. The crystal growth is successfully realized toward the only vertical direction, resulting a crystalline silicon grain with a size of $3{\sim}4{\mu}m$ under the hole. Lateral growth seems to be not occurred. For the AIC experiment, the glass/Al/$SiO_2$/a-Si stacks were prepared where an Al layer was deposited on glass substrate by DC sputter, $SiO_2$ and a-Si films by PECVD method, respectively. Prior to the a-Si deposition, a $30{\times}30$ micron-sized hole array with a diameter of $1{\sim}2{\mu}m$ was fabricated utilizing the femtosecond laser pulses to induce the AIC process through the key holes and the prepared workpieces were annealed in a thermal chamber for 2 hours. After heat treatment, the surface morphology, grain size, and crystal orientation of the polycrystalline silicon (pc-Si) film were evaluated by scanning electron microscope, transmission electron microscope, and energy dispersive spectrometer. In conclusion, we observed that the vertical crystal growth was occurred in the case of the crystallization of a-Si with aluminum by the MIC process in a small area. The pc-Si grain grew under the key hole up to a size of $3{\sim}4{\mu}m$ with the workpiece.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.31 no.1
• /
• pp.97-103
• /
• 1986

In order to investigate the important morphological traits, and grain yield and its components on basis of regional variation of barley plant, Olbori was tested at 3 locations Suwon, Daejeon and Jinju for 3 years. It needed seven days around 15$^{\circ}C$ of daily average temperature for seed emergence. 104 to 144 days for Daejeon and 135 to 142 for Jinju after sowing are needed for productive tillers according to the different sowing dates, and % of productive tillers were ranged on 37-77%, showing higher value at the southern region. Young spike elongated slowly at early stage, and after floret differentiation it appeared rapid development with 1.05-1.95 mm elongating per day. Analysis of variance indicated that only number of kernels/spike showed significant differences among locations, but every traits related to grain yields revealed the significant differences among different sowing dates. Little differences between locations existed on grain yield but its large variation appeared between sowing dates, especially indicating more variation at northern regions.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.300-300
• /
• 2017

'Saemimyeon' a Tongil-type rice variety (Indica ${\times}$ Japonica), which contains high amylose contents is suitable for rice noodle production. Nowadays, the major parts of rice processing industry that includes products like rice flour and noodles are expected to partially replace wheat flour market. The volume of rice noodle market is getting bigger and can contribute to the rice surplus and farmer's income. This study was carried out to promote productivity and flour-making quality of 'Saemimyeon' by finding the most suitable transplanting and harvesting times. The transplanting days used were May $10^{th}$, May $17^{th}$, May $24^{th}$, May $31^{th}$, June $7^{th}$ and June $14^{th}$ and the planting distance used was 30 x 12cm. In addition, harvesting time was determined by days after heading time (40, 45, 50, 55 and 60 days). The field experiment was conducted at the experimental field in Miryang (Southern plain area of Korea) from 2015 to 2016. Our results suggest that the optimum transplanting days were from May $24^{th}$ to May $31^{th}$ which resulted to an average yield of 748~751kg/10a. Interestingly, yield was sharply decreased below 700kg/10a before May $10^{th}$ and after June $7^{th}$. The average grain filling rate before May $31^{th}$ was more than 83% but it declined to 75% after June $7^{th}$. The average temperature ranges from heading time to harvesting time was $ 21\sim25^{\circ}C$ and the estimated optimal temperature was $23.4^{\circ}C$ which is similar to May $24^{th}$ by regression equation. We found that the optimal harvest time was 45~50 days after heading time. It is hypothesized that low temperature at seed maturation time caused the lower grain filling rate therefore 'Saemimyeon' need to be transplanted before May $31^{th}$ for higher productivity. We found no statistical variation in amylose contents among experimental plots (28.2~30.4%). We conclude that the productivity of 'Saemimyeon' highly depends on temperature that is critical for grain filling stage controlled by transplanting time.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.64 no.2
• /
• pp.102-108
• /
• 2019

Pericarp thickness of vegetable corns such as sweet and waxy corn is one of the crucial traits, contributing to their edible quality. This study was carried out to compare the pericarp thickness of super sweet and waxy corn hybrids measured with kernel samples prepared using different methods at different grain filling periods. The samples comprised excised pericarp from dried, frozen (at $-4^{\circ}C$), and fresh kernels. Analysis of variance performed separately on super sweet and waxy corn hybrids indicated a significant three-way interaction among cultivars, kernel sample preparation methods, and days after pollination (DAP). Dried samples of super sweet corn hybrids presented reasonably stable pericarp thickness measurements during grain filling, while all the sample preparation methods fluctuated less as grains of waxy corn hybrids matured. Waxy corn is best consumed at around 24 days after pollination. Pericarp thickness of waxy kernel samples regardless of preparation methods investigated was the same at 24 DAP with a few exceptions. Overall, the common method of drying kernel samples before pericarp excision can provide reliable data for estimating the tenderness of vegetable corn hybrids.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.4
• /
• pp.409-416
• /
• 1987

The object of this study was to investigate the differences in dry matter production, physiological characteristic and grain yield of soybean (Glycine max (L.) Merr.) as affected by planting dates in southern region of Korea. This experiment was conducted using four planting dates and four varieties over 3 years (1982-1984). The different responses of soybean varieties to different temperature and daylength, days from planting to flowering were ranged from 43 to 55 days when planted on May 10 long daylength and low temperature condition. Flowering duration was ranged from 12 to 27 days and 9 to 13 days for the plantings made on May 10 and July 9, respectively. Therefore, it was the shortest under the short daylength and high tempera-ture condition. It also appeared that the later planting caused the lower dry matter weight and leaf area index which resulted in lower grain yield. But grain yield was not directly correlated with the unbalance of Xink/Source Ratio and the lodging from excessive vegatative growth. The grain yield was the highest in May 30 and the lowest in July 9 planting: it was ranged from 2.26 to 2.55 t/ha in the former and 0.85 to 1.20 t/ha in the latter, respectively. The increase in yield was depended on the increase in the number of pods per plant, the number of seeds per pod and the seed weight. The distribution ratio of dry matter to leaves was the hightest at the sixth trifoliolate leaf stage and gradually declined thereafter in all planting dates, and it also appeared that the later planting, the lower the ratio of dry matter to leaves.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.28 no.3
• /
• pp.334-339
• /
• 1983

With the 91 lines of Italian millet collected throughout the whole country in Korea and the 238 varieties from several Asian countries, trial was carried out to elucidate its differentiation, dissemination and distribution, and the ethnobotanical relations to the adjacent area. Glutinous millets which consisted of 66% among the collected Korean lines were widely distributed throughout the whole country, but non-glutinous ones were mainly distributed in the mountainous regions and Jeju island. The variations in germinability at low temperature were recognized among lines, but seemed not to be closely related to their regional distribution. The collected lines with small grain size were distributed mainly in the mountainous regions of middle and northern part of Korea and larger ones in Jeonnam province and Jeju island. And some of them were larger in grain size as compared with that of Japanese and Republic of China varieties. Seed coat color of collected lines in Korea showed wide variations from yellow to gray, especially in Gyungbuk province. However, all lines from Chungnam, Jeonnam and Gyungnam province were yellow in seed coat color. All lines from Korean collection except two lines indicated negative(-) phenol reaction which is very similar to that of Japan and China, while these were quite different from the varieties of Republic of China, Philippines and India, of which 30-60% showed positive(+) phenol reaction. The pattern of the esterase isozyme m Korean lines was simillar to that of Japanese lines and this was quite different from that of Republic of China, Philippines and India. Variation of this trait was greater in Chinese and Korean lines.

• Korean Journal of Plant Resources
• /
• v.19 no.2
• /
• pp.340-343
• /
• 2006

This study was conducted to find out the effect of rainfall time on growth and seed quality in safflower. Rainfall was done artificially and the treatment of rainfall time was divided into 6 parts. Each rainfall treatment was done from the first day of flowering up to the fifth day after flowering, from sixth day after flowering to the tenth day after flowering, from the eleventh day after flowering to the fifteenth day after flowering, from sixteenth day after flowering to twentith day after flowering, from the twenty first day after flowering to the twenty fifth day after flowering and from twenty sixth day after flowering to thirtith day after flowering. Rainfall time after flowering did not affect disease occurrence on the upper part and flower bud of safflower, which were infected at were 3.3 and 1, respectively. Ripened grain found on the main stem and primary branch was 37.4% and 65.0% at first day to the fifth day and sixth day to the tenth day rainfall periods after flowering, respectively. Yield was decreased by 14% in the sixth day up to the tenth day and eleventh day up to the fifteenth day rainfall periods (282-281kg/10a) compared to the one under control (327kg/10a). Hunter's L value was 73.5 and 69.9 in twenty first up to the twenty fifth day and twenty sixth up to the thirtith day rainfall periods after flowering, which decreased significantly to 79.3 under non-rainfall period. Therefore, it can be concluded that the optimum harvest time is twenty fifth day after flowering to maintain seed quality at rainfall time and before harvesting period.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.3
• /
• pp.308-313
• /
• 1995

In relation to shortening generation by using embryo culture of barley immature seed, it is important to find out profitable embryo age for embryo culture and to understand the relationship among embryo and other characters. Two varieties(Olbori and Dusan #12) were cultivated under two growth conditions(15/10 and 25/15$^{\circ}C$). The embryos were aseptically excised when immature seeds were collected 9, 13, 17, 21, 25 and 29 days after heading and cultured on $B_5$ medium. On the 21st day after heading, the length of embryos from top or middle part of spike was longer than that from bottom part. Embryos from bottom part under low temperature condition had the shortest length. Shoot length, root length and root number after embryo culture were little difference among three parts of spike under high temperature condition. Under low temperature, seedlings from bottom part of spike were inferior to those from top or middle part. Length of 29-day-old embryos under low temperature condition was similar to that of 17-day-old ones under high. Under high temperature condition, the length of 17-day-old embryo had positive correlation with kernel width, shoot length, root length and root number, but that of 21-day-old one didn't have. Seventeen-day-old embryos obtained from 25/15$^{\circ}C$ growth condition seem to be efficient to shortening generation by using embryo culture.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.473-480
• /
• 1997

$\beta-SiC$powder with or without the addition of 1-3 wt% of $\beta-SiC$ whiskers (seeds) was hot-pressed at $1850^{\circ}C$ for 1 h using $Al_2O_3$ and $Y_2O_3$ as sintering aids. The hot-pressed materials were subsequently annealed at $1950^{\circ}C$ to enhance grain growth. The introduction of $\beta-SiC$ whiskers into $\beta-SiC$ does not affect the microstructure as well as mechanical properties significantly because the whiskers are not viable in the presence of liquid phase during hot-pressing. The strengths and fracture toughnesses of the hot-pressed and subsequently 5 h-annealed materials with 1 wt% $\beta-SiC$ whiskers and without $\beta-SiC$ whiskers were 465 MPa and 5.8 MPaㆍ$m^{1/2}$, and 451 MPa and 5.5 MPaㆍ$m^{1/2}$, respectively.

• Korean Journal of Plant Taxonomy
• /
• v.44 no.4
• /
• pp.288-297
• /
• 2014

The aim of this study is to analyse misinformation about gymnosperm taxon used for over 57 years, since 1957 when plant biology as a discipline was established in our country. That is, terminologies and descriptions of the reproductive structure (flower) of angiosperms (flowering seed plants) have been incorrectly applied to the reproductive structures (typically cones and pollen grain) of gymnosperms (non-flowering seed plants) by numerous and various media such as text books, dictionaries, and internet websites for plant biology. Thus, these resources have been misleading teachers, students, and other people interested in plant biology in general and taxonomy in particular by describing gymnosperm reproductive structures as if they are the same as angiosperms. Such a practice has an especially adverse effect on plant biology education at all levels of instruction, with teachers and students confused in their understanding of the concept and definition of a flower. In this paper, these incorrect expressions for the reproductive structures of gymnosperms from the various media are analysed and discussed in terms of cladogram, anatomy of reproductive structures, and historical context of classification systems.