• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.50 no.spc1
• /
• pp.239-241
• /
• 2005

Alisma plantago seeds have some difficulties for mechanical sowing because of small, irregular and shrunken shapes. Thus it was intended to make seed pelleting for Alisma piantago seeds to solve these problem. The main object of this study was to find the best materials for Alisma plantago seeds pelleting. The most desirable shapes which provide a spherical and smooth surface of the pelleted seeds that enhance mechanical singling was made from the mixture of SDZ + DE + CA $0.4\%$. The pelleted seeds were easily broken after absorbing water and the germination rate of those was $95.3\%$ in lab.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.79-83
• /
• 1971

To investigate the effects of seed treatments and liming on nodulation and growth of lucerne(Medicago sativa L.) in an upland yellow-brown earth in N.Z. the five levels of seed treatments(Uninoculated, Inoculated, Inoculated plus lime pelleted, Inoculated plus 50/50 phosphate/dolmite pelleted, Inoculated plus ta1c pelleted), and 2 levels of lime applications (0, 25kg/10a) were compared and their interactions were observed, and then the following results were obtained. 1. In oder to obtain the effective nodulation of lucerne on acid soil it is usually necessary to apply lime and inoculate the seed. 2. The coating of inoculated lucerne seed with adequate materials will promote the nodulation. 3. The pelleting of lucerne seed may be a of reducing the need for the heavy liming. 4. The finely grounded lime was the best to use origin upland yellow-brown earth. 5. When the seed were not inoculated or pelleted with inferior material, liming is very effective for the nodulation and growth of lucerne. 6. The pelleting seed will reduce the laborious work and expenditure.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.399-399
• /
• 2008

Synthesis and characterization of ZnO structure such as nanowires, nanorods, nanotube, nanowall, etc. have been studied to multifunctional application such as optical, nanoscale electronic and chemical devices because it has a room-temperature wide band gap of 3.37eV, large exiton binding energy(60meV) and various properties. Various synthesis methods including chemical vapor deposition (CVD), physical vapor deposition, electrochemical deposition, micro-emulsion, and hydrothermal approach have been reported to fabricate various kinds of ZnO nanostructures. But some of these synthesis methods are expensive and difficult of mass production. Wet chemical method has several advantage such as simple process, mass production, low temperature process, and low cost. In the present work, ZnO nanorods are deposited on ITO/glass substrate by simple wet chemical method. The process is perfomed by two steps. One-step is deposition of ZnO seeds and two-step is growth of ZnO nanorods on substrates. In order to form ZnO seeds on substrates, mixture solution of Zn acetate and Methanol was prepared.(one-step) Seed layers were deposited for control of morpholgy of ZnO seed layers by spin coating process because ZnO seeds is deposited uniformly by centrifugal force of spin coating. The seed-deposited samples were pre-annealed for 30min at $180^{\circ}C$ to enhance adhesion and crystallinnity of ZnO seed layer on substrate. Vertically well-aligned ZnO nanorods were grown by the "dipping-and-holding" process of the substrates into the mixture solution consisting of the mixture solution of DI water, Zinc nitrate and hexamethylenetetramine for 4 hours at $90^{\circ}C$.(two-step) It was found that density and morphology of ZnO nanorods were controlled by manipulation of ZnO seeds through rpm of spin coating. The morphology, crystallinity, optical properties of the grown ZnO nanostructures were carried out by field-emission scanning electron microscopy, high-resolution electron microscopy, photoluminescence, respectively. We are convinced that this method is complementing problems of main techniques of existing reports.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.20 no.1
• /
• pp.67-76
• /
• 2000

An experiment was conducted to evaluate the effects of lime, zeolite, and rock phosphate as coating materials and coated seed size on germination, establishment, and early growth of pasture species at the experimental livestock farm, Yonam College of Agriculture in 1997. Germinating energy and germination of coated tall fescue and orchardgrass seeds were lower than those of non-coated seeds. Coated seed of tall fescue with 70% lime and 15% rock phosphate was the best in germination. The germination of small size seed (< ${\varnothing}2$ mm) was better than those of medium (> ${\varnothing}2$ mm and < ${\varnothing}2$ mm) and large size seeds (> ${\varnothing}2$ mm). Germination of coated orchardgrass seed with 55% lime and 30% rock phosphate treatment was higher than that of other coated seeds, and germination of small size seed was higher than those of medium and large size seeds (p<0.05). Germination energy and germination of coated alfalfa and birdsfoot trefoil seeds were lower than those of non-coated seeds. Germination of coated alfalfa seed with 70% lime and 15% rock phosphate, and 45% lime and 55% rock phosphate was higher compared with other coated seeds. Germination of medium size seed was higher than those of small and large size seeds (p<0.05). Among coated birdsfoot trefoil seed, 45% lime and 40% rock phosphate treatment resulted in higher germinating energy and germination than other treatments. There was no significant difference in establishment and early growth of coated tall fescue and orchardgrass seeds. However, tall fescue and orchardgrass coated with 45 % lime and 40% phosphate rock showed higher establishment and early growth. There was also no significant difference in establishment and early growth of coated alfalfa among the treatments. Among coated treatments, establishment and early growth of alfalfa coated with 75% lime and 10% rock phosphate were the highest and showed 46.4% and $72.6\;g/\textrm{m}^2$, respectively. Establishment and early growth of coated birdsfoot trefoil with 55% lime and 30% rock phosphate were the highest among coated birdsfoot trefoil seed (p<0.05) and recorded 46.4% and $44.6\;g/\textrm{m}^2$, respectively. Results of this study indicate that the germination of coated grass and legume seed may be improved by increasing the percentage of rock phosphate and decreasing that of lime. With regard to seed size, the germination of pasture species with small seed size (< ${\varnothing}2$ mm) may be better than medium and large size seeds except alfalfa. Establishment and early growth of grasses can be also improved by increasing the percentage of rock phosphate and decreasing that of lime.

• Korean Journal of Materials Research
• /
• v.14 no.9
• /
• pp.619-626
• /
• 2004

Pulsed metalorganic chemical vapor deposition (MOCVD) of conformal copper seed layers, for the electrodeposition Cu films, has been achieved by an alternating supply of a Cu(I) source and $H_2$ reactant at the deposition temperatures from 50 to $100^{\circ}C$. The Cu thickness increased proportionally to the number of cycles, and the growth rate was in the range from 3.5 to $8.2{\AA}/cycle$, showing the ability to control the nano-scale thickness. As-deposited films show highly smooth surfaces even for films thicker than 100 nm. In addition about a $90\%$ step coverage was obtained inside trenches, with an aspect ratio greater than 30:1. $H_2$, introduced as a reactant gas, can play an active role in achieving highly conformal coating, with increased grain sizes.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.10
• /
• pp.33-40
• /
• 1993

A reflection type 16x8 S-SEED array from LP(Low Pressure)-MODVD-grown GaAs/AlGaAs extremely shallow quantum well(ESQW) structures, with 4% Al fraction, has been fabricated. Its intrinsic region consists of 50 pairs of alternating 100.angs. GaAs and 100.angs. $Al_{0.04}$Ga$_{0.96}$As layers. A multilayer reflector stack of $Al_{0.04}$/Ga$_{0.96}$ As(599$\AA$)/AlAs(723$\AA$) was incorporated for the reflection plane below the p-i-n structures. The device processing after the MOCVD growth includes the mesa etching, isolation etching, insulator deposition, p & n metallization, and AR(Anti-Reflection) coating. For switching characteristics of the S-SEED in the form of p-i-n ESQW diode, the maximum optical negative resistance was observed at 856nm. Reflectance measurements showed a change from 15.6% to 43.3% for +0.9V to -6V bias. The maximum contrast ration of the S-SEED array was 2.0 and all the 128 devices showed optical bistability with contrast ratios over 2.4 at 5V reverse bias.

• Korean Journal of Agricultural Science
• /
• v.13 no.1
• /
• pp.62-67
• /
• 1986

This electron microscopical study was carried out to observe the plasmodesmata of endosperm cells and epicuticular waxes of pericarp ribs on lettuce seed. The morphological modification of pericarp and pericarp ribs was detected by SEM observation. The seed which formed under low temperature, has well developed, suberized cell walls and epicuticular waxes while the seed fromed under high temperature condition has very poorly developed epicuticular waxes. Epicuticular waxes was considered to take over the function of seed protection and keeping the good quality during storage period. The plasmodesmata of endosperm cells in lettuce seed was observed at 4hrs after imbibition for the first time. This phenomenon indicates that the lettuce seed starts its physiological activities in the very early imbibition stages.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.2
• /
• pp.145-156
• /
• 1996

The effects of priming with different polyethylene glycol (PEG 6, 000) solutions on the germination, emergence characteristics and early plant growth in rice, barley and wheat were investigated. Rice, barley and wheat seeds were subjected to various priming conditions of osmotic potentials (-0. 75, -1.00 and -1.50 MPa) of PEG, and incubation period were 5 days at 25, 20, 2$0^{\circ}C$, respectively. The percentage of water absorption was highest in barely, and lowest in rice, and all the treatments enhanced water absorption in barley, but showed no significant effects in rice and wheat. Respiration quotient was lower than none PEG treatment seeds, and those of barley and wheat were higher than rice regardless of PEG concentration, and that of rice increased with high PEG concentration. Total germination percentage of osmoconditioning seeds with PEG was higher than that of none treatment seed, and those of barley and wheat were significant. The artificially deteriorated seeds with PEG treatment seeds after ageing treatment could recover to nearly the same germination level as that of the control seeds. The effects of coating polymer were higher than osmoconditioning with PEG, and germination characteristics in rice showed varietal difference at PVP and waterlock at recoated seeds after PEG treatment. Osmoconditioning with PEG reduced mean germination and emergence time, but there was no difference among PEG concentrations. The plant height of PEG treaed seed in rice was taller and those of barely and wheat showed varietal difference, and those of polymer-coated seed after PEG treatment were different among the polymers. The dry weight of PEG treatment were different among the crops, and those were increased with the high PEG concentration. The emergence percentage of PEG-treated seed were higher than none-treated seed, and those were decreased with the increased PEG concentration, and the highest emergence percentage of rice, barley and wheat were 90, 50 and 50% soil moisture content, respectively. The time to emergence in rice was longer than barley and wheat, and those in rice was shortened in high soil moisture content, and barley and wheat were shortened in low soil moisture content.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.213-217
• /
• 1999

Seed coating and pelleting techniques have been used in many crops to improve the germination vigor of tiny and light seeds. Cultivated Chinese-foxglove (Rehmannia glutlnosa) has been infected by various types of virus derived from vagetative propagation of rootstock. Seed characteristics and alginate-coated seed germination rate have been investigated to get basic information for healthy seedling production through seed propagation. Chinese-foxglove showed different numbers of seeds per pod from 61 in Seocheon local to 207 in Jiwhang 1 and 1,000grain weight also varied from 70mg of Seocheon local to 130mg of Jiwhang 1. Seeds of Chinese-foxglove has dormancy because that seed collected last year more stimulated than that of this year at germination test. Optimum alginate concentration for pellected seeds germination was 2%.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.4
• /
• pp.586-593
• /
• 2007

Seed coating by a phenazine-producing bacterium, Pseudomonas chlororaphis O6, induced dose-dependent inhibition of germination in wheat and barley seeds, but did not inhibit germination of rice or cucumber seeds. In wheat seedlings grown from inoculated seeds, phenazine production levels near the seed were higher than in the roots. Deletion of the gacS gene reduced transcription from the genes required for phenazine synthesis, the regulatory phzI gene and the biosynthetic phzA gene. The inhibition of seed germination and the induction of systemic disease resistance against a bacterial soft-rot pathogen, Erwinia carotovora subsp. carotovora, were impaired in the gacS and phzA mutants of P chlororaphis O6. Culture filtrates of the gacS and phzA mutants of P. chlororaphis O6 did not inhibit seed germination of wheat, whereas that of the wild-type was inhibitory. Our results showed that the production of phenazines by P. chlororaphis O6 was correlated with reduced germination of barley and wheat seeds, and the level of systemic resistance in tobacco against E. carotovora.