• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.6
• /
• pp.719-726
• /
• 2009

One of the alternative runoff management measures is on-site runoff mitigation, such as rainwater retention tank and infiltration facilities especially the latter that is possible to manage simultaneously runoff quality and quantity as a perspective of water-cycle. This study was conducted to develop a particle separator, inclined-pipe settling system, that could improve particle removal efficiency of road runoff as a pre-treatment device of stormwater infiltration. Solid particles larger than $100{\mu}m$ are separated by simple sedimentation; however, the significant amount of pollutants with a diameter less than $100{\mu}m$ remain in suspension. Without any treatment in that case of the runoff into infiltrate, groundwater would be deteriorated and also infiltration rate would be decreased by clogging. Therefore, we suggest optimal design parameters (inclined angle, pipe length, and surface loading rate) of inclined-pipe settling system which can be designed to effectively remove particles diameter smaller then $70{\mu}m$. Thus, the results showed TSS removal efficiency more than 80% with a particle diameter between $20{\mu}m$ and $70{\mu}m$, 100% above particle diameter $70{\mu}m$ for the inflow rate $0.018 m^3/m^2{\cdot}hr$ with pipe inclined at angle $15^{\circ}$.

• Korean Journal of Soil Science and Fertilizer
• /
• v.15 no.4
• /
• pp.207-212
• /
• 1982

Soils and sediments have been uniquely tagged by radioactive isotopes as a result of nuclear test explosions in the 1950's and 1960's. Fallout $^{137}Cs$ strongly fixed to fine soil particles, was measured in sediment profiles in Larto Lake to calculate the sedimentation rate as a time dependence. The Lake sediment profiles indicated an average rate of 1.6 to 3.1 cm/yr of sediment deposition since 1958. The rate of sediment depositions clearly decreased with time. Particle size distribution in sediment was reflected almost fine particles in lake.

• Metals and materials international
• /
• v.24 no.6
• /
• pp.1386-1393
• /
• 2018

The solubility of $TiO_2$ in $NaF-CaF_2-BaF_2$ ternary eutectic melts was investigated at the temperature range of $1025-1150^{\circ}C$. The least-squares equation was obtained from the relationship between the reciprocal temperature and the natural logarithm of the titanium concentration in the melts saturated with $TiO_2$. The corresponding partial molar enthalpy of dissolution of $TiO_2$ was found to be 188 kJ/mol. The titanium saturation concentration was 3.73 wt% at $1100^{\circ}C$. From the titanium concentration change with the added amount of $TiO_2$ at different holding time after a final stirring, it was found that not only complete dissolution of $TiO_2$ but also enough sedimentation of excessive $TiO_2$ should be guaranteed to obtain more reliable solubility data. The holding time of 10 h was found to be enough for the excessive $TiO_2$ particles to settle down in our experimental conditions. It is noteworthy that in case of adding $TiO_2$ in excess of its solubility, the $Ba_{1.12}(Ti_8O_{16})$ phase was observed at the lower and bottom of the solidified salt ingots.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.1
• /
• pp.16-22
• /
• 2002

The diffusion characteristics of an ocean dumping material in the south-eastern East/Japan Sea related to regulate the physical characteristics with the observation and the hydraulic experiment are investigated. The main results are as follows; (1) Spying CTD observation result of the area of Jung in the East/Japan Sea, the ocean dumping area had influenced the Tsushima Warm Current of high temperature and salinity. Horizontal turbulent diffusivity is 1.913$\times$10$^{7}$ by drogue tracking. (2) From the experiment of settling, the initial settling velocity of each material is 1.0~2.7 cm/sec according to the specific gravity and initial concentration. In the pycnocline, particles didn't settle under the pycnocline any more and accumulated. It is signified that calculation of the sedimentation rate of the ocean dumping material including of vertical diffusion must be regard the pynocline in the ocean area have well-developed pycnocline. (3) Vertical turbulent diffusivity were 2.219$\times$10$^{-8}$ ~8.874$\times$10$^{-4}$ cm$^2$/sec from the experiment of settling. And, the pycnocline influenced the vertical turbulent diffusivity.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2002.05a
• /
• pp.82-89
• /
• 2002

Acid dairy drinks(ADD) are a worldwide product existing in many variations: fruit milk drinks, yogurt drinks, soy milk, butter milk, whey drinks and kefir etc. These drinks are marketed with different shelf lives depending on processing: -Short shelf life(maximum 3 weeks, cold storage) - Long shelf life(2 to 9 months, pasteurized, sterilized or retorted) Acidic protein drinks tend to a separation or destabilization process in the absence of stabilizing system during the shelf life of the ADD. A phase separation results in sedimentation of large particles at the bottom of the package and/or the formation of a serum layer at the top(whey off). These beverages are usually composed of an acid dairy phase (fermented base)or a natural base(milk, soymilk etc.)with an acidic medium (fruit phase: pulp, fruit concentrate etc.) which can be flavored. Sugar and stabilizers are added. It has been proved since the late 1950's that adding high methoxy pectin (HM pectin)to acid milk drinks is the best way to prevent the formation of a sediment and/or the whey off. In this presentation, we explain about stabilization mechanism of ADD induced by pectin. Applications and market trend of ADD in Asia and Europe are explained.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.2
• /
• pp.295-302
• /
• 2006

Over the past decades, a flocculation and/or sedimentation process have been adopted to remove pollutants from CSOs. It has been learned that major factors affecting settlement of pollutants are the particle size distribution, their settling velocities and their specific gravity. It is, therefore, a good idea to analyze the particle size distribution and settleability of CSOs pollutants in order to develop details in designing a process. Discussed in this study are pollutant characteristics of CSOs such as particle size distribution and settleability of pollutants. The power law function is applied and is found to be an effective and reliable index for expressing the particle size distribution of pollutants in CSOs. Based on the regression analysis it is observed that the derived constants of curves representing settling velocity profile are proportional to the initial concentration of particles and to the ${\beta}$-values of power law distributions.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.4
• /
• pp.463-474
• /
• 2010

In this study, chemical coagulation conditions for treating combined sewer overflow(CSO) occurred during rainy season were evaluated by jar tests with aluminum sulfate[$Al_2(SO_4)_3{\cdot}17H_2O$] and ferric chloride[$FeCl_3{\cdot}6H_2O$]. The raw domestic sewage sampled from the primary sedimentation tank at a local sewage treatment plant was filtered through $150{\mu}m$ sieve before using. Point of zero charge(PZC) for various dose of aluminum sulfate occurred at pH 5.8-6.5, while for ferric chloride occurred at pH 5.3-6.0 in term of streaming current(SC) values. Charge neutralization ability of aluminum sulfate was bigger than that of ferric chloride. Optimum pH and dose of aluminum sulfate and ferric chloride were 6.2, 0.438mM and 5.8, 0.925mM, respectively. Removal efficiencies of TCOD, turbidity, SS and TP were 75, 97, 95, 96% with aluminum sulfate and 74, 96, 98, 99% with ferric chloride at their optimum coagulation conditions. More efficient removal of SS, TP and small particles was possible with ferric chloride at optimum coagulation conditions. Both SC values and COD removal started to increase where soluble phosphorus was completely removed.

• Progress in Superconductivity and Cryogenics
• /
• v.11 no.4
• /
• pp.8-11
• /
• 2009

This study introduced wastewater treatment method by High Gradient Magnetic Separation (HGMS). HGMS treatment was high efficient method for various industrial wastewaters. The system is currently research state, but we have surveyed commercialize the technology for industry. In rolling plate process, coolant wastewater was recycled by sedimentation and sand filter system. It needs several large reservoirs and long time to remove suspended solid (SS) like metal fines and iron oxide in hot rolling plate making process. If removing rate of suspended solid in rolling coolant wastewater is improved by using HGMS system, the productivity of working process can be increased and the area of reservoir can be reduced. We manufactured high temperature superconducting HGMS system that had a purpose to treatment of coolant wastewater in rolling plate process. We fabricated the prototypes of magnetic matrix filter consisting of stainless steel 430 mesh, which is a core component in the magnetic separation system, In our basic preliminary experiment using HGMS system, it has been clear that the fine paramagnetic particles in the coolant wastewater obtained from rolling plate process of POSCO can be separated with high efficiency.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.1
• /
• pp.149-158
• /
• 2012

Magnesium hydroxide[$Mg(OH)_2$] was prepared by hydrothermal method using oleic acid as surface modifier. $Mg(OH)_2$ particles exhibit flake morphology with micrometer in size and the surface modification starts from the reaction of $C_{17}H_{33}COO^-$ group, derived from oleic acid molecule in alkaline environments. It is found that hydrothermal treatment conditions such as pH, temperature and reaction time are important for the control of the morphology and properties of surface modified magnesium hydroxide. The obtained magnesium hydroxide groups were characterized by FE-SEM, XRD, FT-IR, TGA. The dispersion in organic solution was determined by sedimentation test and compared with the result of raw $Mg(OH)_2$.

• Journal of Korea Water Resources Association
• /
• v.50 no.11
• /
• pp.715-723
• /
• 2017

Extracellular Polymeric Substances (EPS) in the water environment assemble fine, colloidal particles, such as clays, microorganisms and biomass, in large flocs, which are eventually subject to sedimentation and deposition and determine water/sediment quality and quantity. This study hence aimed to investigate the way that water and colloidal chemistry affects EPS-mediated flocculation of colloidal particles, using a jar-test experiment. Especially, ionic strength, divalent cation and humic substances concentrations were selected as experimental variables in the jar-test experiments, to elucidate their effects on EPS-mediated flocculation. A higher ionic strength increased flocculation capability, reducing electrostatic repulsion between EPS-attached colloidal particles and enhancing particle aggregation. 0.1 M NaCl ionic strength had higher flocculation capability, with 3 times larger floc size and 2.5 times lower suspended solid concentration, than 0.001 M NaCl. Divalent cations, such as $Ca^{2+}$, built divalent cationic bridges between colloidal particles and EPS (i.e., $colloid-Ca^{2+}-EPS$ or $EPS-Ca^{2+}-EPS$) and hence made colloidal particles to build into large, settelable flocs. A small $Ca^{2+}$ concentration enhanced flocculation capability, reducing suspended solid concentration 20 times lower than the initial dosed concentration. However, humic substances, adsorbed on colloidal particles, reduced flocculation, because they blocked EPS adsorption on colloidal particles and increased negative charges and electrostatic repulsion of colloidal particles. Suspended solid concentration in the tests with humic substances remained as high as the initial dosed concentration, indicating stabilization rather than flocculation. Findings about EPS-mediated flocculation in this research will be used for better understanding the fate and transport of colloidal particles in the water environment and for developing the best management practices for water/sediment quality.