• 상하수도학회지
• /
• 제18권5호
• /
• pp.573-579
• /
• 2004

Electroflotation, which is used as an alternative to sedimentation, is a separation treatment process that uses small bubbles to remove low-density particulates. Making allowances for recent collision efficiency diagram based on trajectory analysis, it is necessary to tailor zeta potential of bubbles that collide with negatively charged particles. In this paper, the study was performed to investigate the effects of magnesium and aluminium ions on zeta potential of bubbles. And, it was studied to find out factors which could affect the positively charged bubbles. Consequently, zeta potential of bubbles increased both with higher concentration of metal ions and in the acidic pH value. And, a probable principle that explained the procedure of charge reversal could be a combined mechanism with both specific adsorption of hydroxylated species and laying down of hydroxide precipitate. It also depended on the metal ion concentration in the solution to display its capacity to control the bubble surface.

• 환경위생공학
• /
• 제10권1호
• /
• pp.98-105
• /
• 1995

In the treatment of wastewater or sewage plant sludge with high solid concentration, high rate digestion process in which heating and mixing occur at a time is mainly used, and in the case of wastewater containing solid matter below 1000mg/ℓ the recently developed AF or UASB is developed Recently and commonly utilized. But these processes have weakpoints such as clogging of packing media and need of long period of trial run after microorganism granulation. In this point of view, there are active researches on the ASBR( anaerobic sequence batch reaction ) that is capable of treating of organic matter with reactor that has no packing materials and controlling the inflow time, reaction time sedimentation time and outflow time by time control without loss of microorganisms. The objectives of this study are to evaluate the efficiency of ASBR process according to the reaction time, change of treated water quality and gas output rate in the treatment of wheat plant wastewater.

• 상하수도학회지
• /
• 제9권4호
• /
• pp.63-72
• /
• 1995

The mean velocity gradient, G, has been used as a principal design and operation parameter for flocculation unit. This paper questions that significance. The physical and qualitative meaning of collision efficiency factors of each transport mechanism (Brownian motion, fluid shear, and differential sedimentation) are reviewed. The overall collision frequency function is calculated by summing up the collision frequency function of each mechanism. In the collision of two particles of different size, a diagram showing the dominant region in which each mechanism is important is developed and the meaning of the diagram is discussed. The primary ramification of this curvilinear, heterodisperse approach is that G is found to be not nearly so important. Previous experimental work in which the role of G has been examined is reviewed in light of this finding.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 춘계학술대회
• /
• pp.338-339
• /
• 2015

VTS 의사결정지원시스템은 관제사들이 선박을 관제함에 있어서, 의사결정을 지원하기 위하여 선박 간 거리 등의 정보를 제공하는 시스템을 의미한다. 본 논문에서는 현재 제정되고 있는 IALA 표준을 중심으로 VTS 의사결정지원 시스템의 구분, 제공하는 경고 정보의 세분화된 정의, 제공되어야 할 경고 기능 등을 분석한다.

• 에너지공학
• /
• 제21권4호
• /
• pp.378-384
• /
• 2012

Higher compression ratio is required in diesel engine to ignite the fuel that leads to better efficiency. For complete combustion inside the cylinder it is important to ensure the clean air flow with free of debris and as cool as possible. In this manner, modification of intake valve arrangements is taken in to consideration importantly. In this paper, the intake valve arrangements are modified with newly designed valve mixer. It causes swirl flow of air through the intake port that mixing with the fuel followed by complete combustion. The use of valve mixer reduces the carbon sediment formation on valve fillet and its face area as the carbon particles gradually take place on it after certain running period. It therefore, helps to increase the valve lifetime. And at the same time it reduces the exhaust elements i.e. soot from the automobiles to a significant level.

• 상하수도학회지
• /
• 제18권3호
• /
• pp.385-391
• /
• 2004

This paper examines the applicability of DAF-system to the domestic sewers for the effective CSOs treatment. The procedures for the experiment include mainly two steps. One is to analyse the water qualities and settling test of the CSOs and the other focuses on general characteristics of the CSOs such as the removal efficiency of pollutant, the distribution of particle size and mass balance of DAF-system. The result of this study show that the application of DAF-system is more effective and economical than the existing treatment systems because it has two removal mechanisms of sedimentation and flotation simultaneously.

• 상하수도학회지
• /
• 제18권6호
• /
• pp.715-723
• /
• 2004

The quantity of residuals generated from water treatment plants depends upon the raw water quality, dosage of chemicals used, performance of the treatment process, method of sludge removal, efficiency of sedimentation, and backwashing frequency. Sludge production by the physical separation of SS occurs under quiescent conditions in the primary clarifier, where suspended solids are allowed to settle and to consolidate on the clarifier bottom. Raw primary sludge results when the settled solids are hydraulically removed from the tank. The relative solid and liquid fractions of a slurry are most commonly described by the solids concentration, expressed as mg/L or percent solids. The purpose of the present investigation is to estimate a suitability on the design capacities of residuals treatment facilities by the quantity of dewatered sludge generated from water treatment plants.

• 펄프종이기술
• /
• 제34권3호
• /
• pp.32-37
• /
• 2002

The paper mill wastewater actually generating bulking was used to apply to the spot. Batch and continuous type pilots were used in this study. Optimal time after propagating generation of activated sludge in aeration basin by adding Hoc forming microorganism was 24 and 36hours while optimal time of activated sludge in original aeration basin was 60hours. Showing the difference of sedimentation velocity at 7th day after operating a pilot continuously, SV30 was decreased to 50% at 13th day. COD value in aeration basin with floe forming microorganism was 35mg/L while COD value in original aeration basin was 52mg/L. It was indicated that application of Hoc forming microorganism can control the bulking of paper mill wastewater by shortening of recovery time and improving of pollution removal efficiency.

• 상하수도학회지
• /
• 제25권5호
• /
• pp.777-782
• /
• 2011

The residual treatment facilities in WTP(water treatment plant) play an important role in solid-liquid separation. At present, it is difficult to solve problems related with thickening and dewatering of WTP sludge, and discharging waste water to river. The quantity of residuals generated from water treatment plants depends upon the raw water quality, dosage of chemicals used, performance of the treatment process, method of sludge removal, efficiency of sedimentation, and backwashing frequency. Sludge production by the physical separation of SS(Suspended Solid) occurs under quiescent conditions in the primary clarifier, where SSs are allowed to settle and to consolidate on the clarifier bottom. Raw primary sludge results when the settled solids are hydraulically removed from the tank. In this study, Drawing characteristics of the sludge thickening in the thickener of Water Treatment Plants was simulated by Using CFD(Computational Fluid Dynamics.

• 상하수도학회지
• /
• 제10권2호
• /
• pp.80-87
• /
• 1996

Treatment efficiencies of water quality parameters such as $KMnO_4$ Demand, $UV_{254}$, Turbidity, and LAS(Linear Alkyl Sulfonate) were compared between DAF(Dissolved Air Flotation) and CGS(Conventional Gravitational Sedimentation). The experimental results showed that DAF is much more efficient in treatment of water quality parameters than CGS. The optimum pH was about 7, and optimum alum($Al_2(SO_4)_3$) dose was about 30 ppm for DAF treatment. Economic aspects were also analyzed for bath systems. Even though production cost per ton of drinking water is slightly higher in DAF than in CGS, it turned out that construction cost and land value of CGS far surpass the production cost. DAF system is superior in removal efficiency of impurities and in production cost as a whole to CGS system.