• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.161-166
• /
• 2004

Research for deposits in Nakdong eatuary that research about Nakdong eatuary's sediment flows out in Nakdong-kang so far had been progressed but research about deposits that is flowed in open sea is insufficient. Observed Nakdong eatuary's characteristic of sediment transfer through observation during the second during Buteo 20 days on February 6, 2004 in this research Resuspension bed load Flux appeared high the first result St.4 point and St.5 point. St.4 branch had much bed load amount that is flowed in the east, and bed load that St.5 branch is flowed in the south appeared much Tendency such as the first showed in the second result, but compare with the first result and St.5 branch had much bed load that is transfer in end. Bed load that is transfer in observation result Nakdong river was less. As this, can know that amount of sediment that is transfer in open sea more than deposits that is transfer in Nakdong river is much Is expected to exert effect that deposits that is transfer in open sea is high in Nakdong estuary's topography change. Specially, observation result is expected that Nakdong estuary's deposition tendency becomes Jinwoodo southern and Shinho southern.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.3
• /
• pp.222-231
• /
• 2002

The ADP is an advanced piece of oceanographic equipment that measures water speed and direction profiles from the acoustic Doppler principle. In recent years, the strength of the acoustic backscatter obtained from ADP has been used to measure vertically suspended sediment concentration(SSC) profiles. In this study, an ADP was installed in coastal waters near Yumsan, on the west coast of Korea, and flow and sediment data were gathered simultaneously. SSC concentrations were calculated from the acoustic backscatter strengths adjusted by using calibrated acoustic coefficients. The observed SSC profiles were compared with analytical solutions and showed good agreement. Simultaneously, the suspended material fluxes were analyzed in detail. ADP was very useful for measuring the vertically distributed suspended sediment concentrations and flow velocity profiles.

• Journal of the Korean Geographical Society
• /
• v.43 no.6
• /
• pp.808-823
• /
• 2008

Sediment abrasion in rivers is caused by the interaction between bedrock channel bed and sediment particles transported through the river. Abrasion rate of sediment particles in rivers is controlled by two major factors; Sediment transport conditions including hydraulic conditions form the erosive forces and physical and chemical strengths of the particles form a resistance force against abrasion and other erosional processes. Physical experiments were performed to find the role of each variable on sediment abrasion process. Total 266 sediment particles were used in this experiment. All sediment particles were divided into 11 independent sediment groups with sediment particle size and sediment loads. Each sediment groups were abraded in tumbling mill for up to 8 hours. Changes in weight were recorded by run and total: 2,128 cases of abrasion rate were recoded. Physical strength of rock particles was measured with point load strength index. It is found that sediment abrasion rate has a negative functional relationship point load strength index ($I_{a(50)}$) ($R^2=0.22$). It was suggested that physical strength of sediment particles set the "maximum possible abrasion rate'. As sediment flux increases, abrasion rates of sediment particles with similar point load strength index were changed. It could be concluded that not only physical characteristics of sediment particles, but also sediment transport conditions control sediment abrasion rates.

• Journal of Korea Water Resources Association
• /
• v.48 no.1
• /
• pp.9-21
• /
• 2015

This study examined pollution level of sediment in Sookchun lake, and studied dredging validity by examining phosphorous release characteristics on surface polluted soil. Total phosphorous, the principal cause of algal blooms, exceeded dredging assessment standards regarding Daechung lake (1.5 mg/g) at all points. Also at all points, total nitrogen exceeded the dredging assessment standard regarding Paldang Lake (1.1 mg/g), but fell short of the standard regarding Daechung lake (3.0 mg/g). Dredging zone was suggested in this study is Chuso water body (WS-6~WS-12) in Sookchun lake. In relation to sediment pollution levels measured at different depths, LOI tended to decrease as it became deeper. The concentrations of T-N varied depending upon the depth as well as points, but no regular pattern was observed. The depth and site did not significantly influence T-P. From the results of phosphorous release tests, it was shown that total phosphorous release flux was calculated to be $7.2{\sim}15.4mg/m^2/d$ for anaerobic condition, $0.5{\sim}2.0mg/m^2/d$ for aerobic condition and $2.0{\sim}4.1mg/m^2/d$ for facultative condition. Release flux and T-P concentration of surface sediments had positive correlation ($R^2$ 0.7871). And The corelation between release flux and DO condition in reactor had strong negative correlation ($R^2$ 0.8824).

• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.165-174
• /
• 2014

A model combining multi-dimensional discretized population balance equations with a computational fluid dynamics simulation (CFD-DPBE model) was developed and applied to simulate turbulent flocculation and sedimentation processes in sediment retention basins. Computation fluid dynamics and the discretized population balance equations were solved to generate steady state flow field data and simulate flocculation and sedimentation processes in a sequential manner. Up-to-date numerical algorithms, such as operator splitting and LeVeque flux-corrected upwind schemes, were applied to cope with the computational demands caused by complexity and nonlinearity of the population balance equations and the instability caused by advection-dominated transport. In a modeling and simulation study with a two-dimensional simplified pond system, applicability of the CFD-DPBE model was demonstrated by tracking mass balances and floc size evolutions and by examining particle/floc size and solid concentration distributions. Thus, the CFD-DPBE model may be used as a valuable simulation tool for natural and engineered flocculation and sedimentation systems as well as for flocculant-aided sediment retention ponds.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.4
• /
• pp.247-256
• /
• 2002

Distribution of surface and suspended sediments was studied to understand sedimentary processes of finegrained sediment near the cooling water intake of Pyongtaek power plant on the west coast of Korea. The grainsize of surface sediment during the winter was coarser in the opened northern area than sheltered southern area. During the summer, finer sediment was found in the east (landward) than west due under dominantly the influence of tidal current. The concentration of suspended sediments was higher in the winter than summer and in the mid- to deep waters than surface waters. Asymmetry of tidal current induced net landward transport of suspended sediments. Landward transport of suspended sediments was most significant at the beginning of flood time when water level is low. Net suspended sediment fluxes ranged from 3.4$\times$10$^{-3}$ kg.m$^{-2}$ .s$^{-1}$ to 5.7$\times$10$^{-3}$ kg.m$^{-2}$ .s$^{-1}$ This large landward transport of suspended sediments is attributable to combination of enhanced flow induced by intake of cooling water and artificial structures near the water intake.

• Journal of The Geomorphological Association of Korea
• /
• v.26 no.3
• /
• pp.1-17
• /
• 2019

Naeseongcheon is Korea's representative sand stream, and it is one of the regions where the dynamic changes of various river topography developed in the sand bed can be observed. Most of drainage area near of the river channel are formed with Daebo granite, and the granite weathering zone is developed at the surface of hill. Due to the massive input of sediment flux, braided channel reaches are found some of the area. However, the results of the study shows that the alluvial layer is very thin in some reaches. In addition, bedrock or weathered materials, including the Tors are exposed at the channel beds. On the other hand, during the flood, a considerable amount of sediment was introduced, causing the massive sediment to be close to 1m thick. In addition, despite the short distance, large changes in the particle size and sorting of the sediment were observed. Vegetation, on the other hand, has been shown to have a significant effect on the development of the overall channel bed topography, as reported in previous studies. In small floods or low water levels, vegetation's protection role of the surface is predominates, but in large flood conditions, herbaceous loss at the surface of the point bars, accelerating the erosion of surface.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.5
• /
• pp.288-302
• /
• 2017

Accurate measurement of benthic nutrient fluxes (BNF) is a prerequisite for evaluating the effect of sediments on nutrient cycle in the surface water. The intact sediment cores were collected in July 2015 at the midstream of Nakdong River. We identified pre-incubation time (6, 12, 24 hr), dissolved oxygen concentration (90, 70, 50% saturation), diffusive boundary layer thickness (0, 0.6-0.8, 1.2-1.4 mm), and incubation temperature (10, 17, 20, $25^{\circ}C$) as the most important control factors, and measured the BNF fluctuation with the variation of these factors using the laboratory sediment core incubation method. Since the chemical composition, redox condition, hydrodynamic regimes and microbial activities at the sediment-water interface were changed as a result of the alteration of control factors, sediment core incubation should be conducted under as close to the natural conditions of study site as possible, in order to produce the results similar to actual values. Relative percentage differences between two replicates were below 20% in most control factors, which showed satisfactory precision for strict compliance with the experimental conditions and procedures. In the further studies, we will compare the results of core incubation with those of in situ measurements to confirm the accuracy of the sediment core incubation method.

• Journal of Korea Water Resources Association
• /
• v.47 no.8
• /
• pp.703-715
• /
• 2014

This study aims to investigating the effect of Schmidt number (${\sigma}_c$) on sediment suspension and hydrodynamics calculation. The range of ${\sigma}_c$ is also studied based on the flux Richardson number ($Ri_f$) and gradient Richardson number ($Ri_g$). Numerical experiments are carried out by 1 dimensional vertical model. Both cohesive and non-cohesive sediments are tested under the conditions of pure current and oscillatory flow. The turbulence damping effect due to sediment suspension is examined considering ${\sigma}_c$ as a constant for the damping effect. The results of this study show the consistent effect of ${\sigma}_c$ on sediment suspension regardless of hydrodynamic condition. It is also found that the model overestimates the flow velocity and turbulent kinetic energy when the damping effect is not considered. Under the conditions of $Ri_f$ and $Ri_g$ causing density stratification, it is known that the vertical mixing of sediment is reasonably calculated in the range of ${\sigma}_c$ from 0.3 to 0.5.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.1
• /
• pp.1-9
• /
• 2000

Vertical temperature distributions in muddy intertidal sediments near the Jebu Island on the west coast of Korea were obtained during the period of ebb tide which occurred in day time. The observations of mud temperature were made with thermistor embedded probe at 2cm interval for 18cm-layer of sediment for five different months of the year. Temporal changes in the vertical profile of the sediment temperature are strongly depend on the air temperature, the previous time of flood tide and the time of ebb tide. Heat exchanges in the surface layer (0-2 cm) in terms of magnitude and direction are greater than and opposite to those in the deeper sediment layer (8-12 cm), respectively and do not show any significant seasonal variations. In general, the surface layer gains heat while the deeper layer loses the heat. By using the 1-D diffusion equation temporal vertical profiles of the sediment temperature were obtained and were compared with the observed ones. The results show that in the sediment layer below 4 cm-depth the heat transport is predominantly by molecular diffusion. The average magnitude of heat flux into the sediment layer (0-18 cm) during the ebb tide when the mudflats were exposed in the middle of the day were between 4.1 and $28.9\;W/m^2$.